S4DC - Remote control SpeakerCraft - Free user manual and instructions
Find the device manual for free S4DC SpeakerCraft in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Remote Control |
| Brand | SpeakerCraft |
| Model | S4DC |
| Compatible Devices | Up to 4 audio/video devices (TV, DVD, cable box, etc.) |
| Control Technology | Infrared (IR) |
| Power Source | 2 x AAA batteries (not included) |
| Dimensions (H x W x D) | Approx. 8.5 x 2.0 x 1.0 inches |
| Weight (without batteries) | Approx. 4.4 oz (125 g) |
| Number of Buttons | 45+ |
| Backlit Keypad | Yes |
| Learning Function | Yes, can learn IR codes from original remotes |
| Macro Programming | Supports programmable macros |
| Code Library | Pre-programmed with codes for major brands |
| Range | Up to 40 feet (12 m) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Warranty | 1 year limited |
Frequently Asked Questions - S4DC SpeakerCraft
How do I program the SpeakerCraft S4DC remote control?
Insert two AAA batteries (not included) into the remote. Press and hold the SETUP button until the red LED blinks twice. Enter the 3-digit code for your device (see the code list in the manual or search online). If no code works, use the learning function by placing the original remote head-to-head and following the learning procedure.
How do I replace the batteries?
Slide the battery cover on the back of the remote downward to remove it. Insert two new AAA batteries with correct polarity (+/-). Replace the cover until it clicks.
Why is my remote not working?
First, check the batteries: replace if low. Ensure there are no obstructions between the remote and the device. Verify that the remote is in the correct mode (e.g., TV, DVD). If still not working, try resetting the remote by removing batteries for 30 seconds, then reprogram it.
Can the S4DC control my soundbar?
Yes, if your soundbar uses infrared (IR) control. Use the learning function or search for a code in the code list under 'AUDIO' or 'AMP'. If you have the original remote, you can teach the S4DC the specific commands.
How do I set up a macro?
Press and hold SETUP until the LED blinks twice. Press MACRO, then press the device button (e.g., TV) twice. Enter the sequence of commands you want (up to 10 steps). Press MACRO again to save. To execute, press the assigned macro button.
Is the backlight adjustable?
The backlight on the S4DC automatically illuminates when you press any button. It is not adjustable; it stays on for a few seconds after the last press to save battery.
How many devices can the S4DC control?
The S4DC can control up to 4 different devices: typically TV, DVD, cable/satellite, and audio (Aux). You can assign each device button to a different component.
Where can I find the code list for my devices?
The code list is included in the user manual that came with your remote. If you lost it, you can download a PDF from the SpeakerCraft support website or search online for 'SpeakerCraft S4DC code list'. Many common codes are available.
Can the remote learn from another universal remote?
Yes, the learning function allows you to copy IR commands from any working remote, including other universal remotes. Follow the learning procedure: press SETUP, then LEARN, point the two remotes at each other, and press the button to be learned.
How do I reset the remote to factory defaults?
Remove the batteries from the remote. Press and hold the SETUP button for 10 seconds (some models may require a different button). Release the button. Reinsert the batteries. The remote should be reset to factory settings. You will need to reprogram it.
User questions about S4DC SpeakerCraft
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Remote control in PDF format for free! Find your manual S4DC - SpeakerCraft and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. S4DC by SpeakerCraft.