AHP1500 - Leaf blower EGO - Free user manual and instructions

Product Type	Battery-Powered Pole Saw
Brand	EGO
Model	AHP1500
Power Source	56V Lithium-Ion Battery (Not Included)
Bar Length	10 inches
Chain Pitch	3/8 inch
Chain Gauge	0.043 inch
Cutting Capacity	Up to 8 inches diameter
Overall Length	6.5 to 9.5 feet (adjustable)
Weight	12.5 lbs (without battery)
Battery Compatibility	EGO 56V ARC Lithium™ batteries
Motor Type	Brushless
Chain Speed	Up to 28 ft/s
Oil Capacity	3.4 oz
Adjustable Head	0° to 60° with 15 positions
Handle Type	Telescoping with overmold grip
Safety Features	Chain brake, hand guard, lock-off switch
Included Accessories	Guide bar, chain, scabbard, shoulder strap
Warranty	5-year limited tool warranty
Certifications	UL listed, meets ANSI standards

Frequently Asked Questions - AHP1500 EGO

What battery does the EGO AHP1500 use?

The AHP1500 is compatible with all EGO 56V ARC Lithium™ batteries, such as the BA1400, BA2800, and BA4200. Choose a battery with higher Ah for longer runtime.

How do I adjust the cutting head angle?

Locate the angle adjustment lever near the head. Squeeze the lever and rotate the head to one of 15 positions (0° to 60°). Release the lever to lock it in place.

Can I use this pole saw with an extension?

Yes, the telescoping pole extends from 6.5 to 9.5 feet. Simply loosen the collar, extend to desired length, and retighten.

What type of chain oil should I use?

Use a high-quality bar and chain oil with viscosity around SAE 30. For cold weather, use winter-grade oil. Never use waste oil.

How often should I sharpen the chain?

Sharpen the chain when it becomes dull (produces sawdust instead of chips). After every 5-10 hours of use is typical, but depends on cutting conditions.

Is the chain brake automatic?

Yes, the chain brake activates automatically if kickback occurs. It can also be engaged manually by pushing the front hand guard forward.

What should I do if the chain comes off?

First, ensure the tool is off and battery removed. Reinstall the chain on the bar, making sure the cutters face the correct direction. Adjust chain tension by turning the tensioning screw and retightening the bar nuts.

Can I use a longer bar on the AHP1500?

No, the AHP1500 is designed for a 10-inch bar only. Using a different bar may cause poor performance or safety issues.

How do I clean the pole saw after use?

Remove battery and chain. Wipe the bar and housing with a damp cloth. Clean the chain with a brush and oil it. Store in a dry place.

What does the blinking light on the battery mean?

A blinking light indicates the battery is too hot or too cold. Let it cool down or warm up to room temperature before charging or using.

USER MANUAL AHP1500 EGO

Operation Instruction for Hip-pad AHP1500

5