Elite Collection Motion Plus CC23155 - Heating Lasko - Free user manual and instructions

Brand	Lasko
Model	Elite Collection Motion Plus CC23155
Product Type	Tower Heater with Oscillation
Heating Technology	Ceramic
Power Source	120V AC, 60Hz
Heat Settings	High (1500W) and Low (900W)
Thermostat	Adjustable Thermostat
Oscillation	Yes, 70° Wide Oscillation
Remote Control	Includes Remote Control
Timer	Programmable Timer (1-8 hours)
Safety Features	Overheat Protection, Tip-Over Switch, Cool-Touch Exterior
Filter	Washable Dust Filter
Dimensions (H x W x D)	30.5 x 10.2 x 10.2 inches
Weight	10.1 lbs
Warranty	3-Year Limited Warranty
Cleaning Instructions	Unplug and wipe with a damp cloth; wash filter monthly
Repairability	No user-serviceable parts; contact Lasko support
Manufacturer	Lasko Products, LLC

Frequently Asked Questions - Elite Collection Motion Plus CC23155 Lasko

How do I set the thermostat on my Lasko CC23155?

Rotate the thermostat dial on the control panel or use the remote. Turn clockwise to increase the desired temperature. The heater will cycle on and off to maintain the set temperature.

What does the oscillation feature do and how to enable it?

Oscillation makes the heater rotate left and right to distribute heat more evenly. Press the Oscillate button on the unit or remote to start or stop oscillation.

Can I leave the heater unattended?

It is not recommended to leave any space heater unattended. However, the Lasko CC23155 has safety features like overheat protection and tip-over switch that automatically turn off the heater in unsafe conditions.

How often should I clean the filter?

Clean the filter every 2 weeks during heavy use. Remove the filter, gently vacuum or wash with mild soap and water. Allow it to dry completely before reinstalling.

Why is my heater not turning on?

Check if the unit is plugged in and the power outlet is working. Ensure the thermostat is set above room temperature. If the tip-over switch is engaged, place the heater on a flat, stable surface. If still not working, contact Lasko support.

How do I use the timer function?

Press the Timer button repeatedly to set the desired run time from 1 to 8 hours. The display will show the remaining time. The heater will automatically turn off when the timer expires.

Is the heater safe for use around pets and children?

The exterior remains cool to the touch, reducing burn risk. However, always supervise children and pets around any heating device. Do not block the intake or outlet.

Can I use an extension cord with this heater?

It is recommended to plug the heater directly into a wall outlet. If an extension cord is necessary, use a heavy-duty cord rated for at least 1500W (14 AWG minimum). Avoid using a power strip.

What is the recommended room size for this heater?

This heater is suitable for heating a room up to approximately 300 square feet, depending on insulation and ceiling height.

How do I reset the overheat protection?

If the heater has shut off due to overheating, unplug it and allow it to cool for at least 10 minutes. Plug it back in and turn it on. If the problem persists, check for obstructions or contact Lasko.

USER MANUAL Elite Collection Motion Plus CC23155 Lasko

This Heater is intended for use as supplemental heat.

This Heater is for residential use only.

It is not intended to be used in commercial, industrial or agricultural settings.

READ AND SAVE THESE INSTRUCTIONS

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!

Have a Question? Need a Part? Please Do Not Return Product to Store!

Contact Lasko Customer Service:

1-800-233-0268 Monday-Friday 8AM - 5PM EST.

WARNING

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, these instructions and warnings should always be followed to reduce the risk of fire, electrical shock and injury to persons:

Read all instructions before using this Heater.

WARNING

PLUG HEATERS DIRECTLY INTO A 120V WALL OUTLET/RECEPTACLE ONLY. NEVER USE WITH AN EXTENSION CORD. DO NOT PLUG HEATER INTO ANY OTHER CORD CONNECTED DEVICE, SUCH AS A POWER STRIP, SURGE PROTECTOR, MULTIPLE OUTLET ADAPTER, CORD REEL OR OUTLET-TYPE AIR FRESHENER. THE USE OF SUCH DEVICES MAY CREATE A FIRE HAZARD. DO NOT PLUG MULTIPLE DEVICES IN THE SAME OUTLET OR ON SAME CIRCUIT AS HEATER.

FAULTY WALL OUTLET CONNECTIONS MAY CAUSE THE WALL OUTLET TO OVERHEAT. BE SURE THAT HEATER PLUG FITS TIGHTLY INTO OUTLET BEFORE EACH USE. DURING USE, CHECK TO MAKE CERTAIN THE HEATER PLUG IS NOT OVERHEATING. IF NECESSARY HAVE A QUALIFIED ELECTRICIAN CHECK AND/OR REPLACE THE WALL OUTLET. DO NOT USE THIS HEATER WITH ANY SOLID STATE SPEED CONTROL DEVICES.

Make certain that the power source conforms to the electrical requirements of the Heater. Extreme caution is necessary when any Heater is used by or near children or invalids. The Heater should not be left operating unattended. Never leave children unattended when the heater is on or plugged in.

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

DO NOT use the Heater in areas where gasoline, paint, or flammable liquids are used or stored. DO NOT use Heater in locations where flammable or explosive chemicals are stored, or in wet atmospheres.

Do not operate any Heater with a damaged cord or plug or after the Heater malfunctions, or has been dropped or damaged in any manner. To disconnect Heater, turn the Heater OFF then remove the plug from the outlet.

Always unplug Heater when not in use. Unplug power cord before servicing or moving the Heater. Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock, fire, or

damage the Heater. Do not block or tamper with the Heater in any manner while it is in operation. Do not block air intakes or exhaust in any manner. Do not place on soft surfaces, like a bed, where openings may become blocked.

Do not depend on the on/off switch as the sole means of disconnecting power when servicing or moving the heater. Always unplug the power cord.

CAUTION

• Always place the Heater on a stable, flat, level surface when operating, to avoid the chance of the Heater overturning. Locate the Power Cord so the Heater or other objects are not resting on it. DO NOT run Power Cord under carpeting. DO NOT cover Power Cord with throw rugs, runners, or similar coverings as this may cause port to overheat. Arrange Power Cord away from room traffic and where it will not be tripped over.

- This Heater is HOT when in use. To avoid burns, do not let bare skin touch hot surfaces. Always use handle when moving this Heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 m) from the front of the Heater and keep them at least 1 foot (0.3 m) from the sides and rear.

- This Heater is not intended for use in wet or damp locations. This Heater is not intended for use in bathrooms, laundry areas and similar indoor locations. NEVER locate a Heater where it may fall into a bathtub or other water container.

- This Heater is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for Agricultural Buildings. THIS HEATER DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).

- This Heater is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical requirements for Hazardous locations. THIS HEATER DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008).

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 13 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses the equipment, or other equipment, is not suitable for any use of any electronic devices, or it is suitable for any use of any electronic devices. The equipment is used to ensure that the equipment is available for communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the equipment. The equipment is not suitable for any use of any electronic devices, or it is suitable for any use of any electronic devices. The equipment is not suitable for any use of any electronic devices. The equipment is not suitable for any use of any electronic devices. See: Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or other equipment may have been used to operate in various changes and modifications made to the equipment without the approval manufacturer could void the user's authority to operate this equipment.

Please contact Customer Service at 800-233-0266 Monday through Friday from 8am to 6pm EST for assistance.

SAVE THESE INSTRUCTIONS

MODELO CC23155

FUNCIONAMIENTO

1. Carefully remove the Heater from the bag and the carton.
2. Place the Heater on a firm, level surface. Plastic or rubber tabs, like the feet on this unit, may stick to furniture surfaces and/or hardwood floors. The unit may leave a residue that could darken, stain or leave permanent bleminishes on the finish of certain furniture surfaces, including wood surfaces, and/or hardwood floors.
3. Plug the cord set into a 120 volt outlet.
   WARNING

Be sure that the plug fits tightly into outlet. When plugs fit loosely into receptacles, they may slip partially or completely out of the receptacle with only the slight movement of the attached cord. Receptacles in this condition may overheat and pose a serious fire hazard; it covered by a curtain or drape, the fire hazard is oven greater.
4. When the Heater is initially plugged in, there will be a "beep" and the Power Light will come on indicating that there is power to the unit. The Power Light will remain ill until the Heater is unplugged from the electrical outlet.
5. Turn the Heater ON by pressing the Power Button (1).
6. Upon turning the Heater on, the unit will be in HIGH head
(1500 Watts). (Figure 1)
7. Press the Power Button (°) for LOW heat.
8. To turn the Heater OFF, press the Power Button (☐) and unplug the Heater from the electrical outlet.

Save-Smart® (Figure 2)

Press (∅) to activate the Save-Smart ^® Function.

1. Set the thermostat to desired temperature using the (for (-) buttons) (Note: The default Save-Smart ^® temperature is 72°F).
2. When you reach the temperature at which you want to
   set the unit, the set temperature will flash several times.
3. When the air temperature is less than the set temperature, the heater will run in HIGH heat.
4. Once the thermostat reaches the set temperature the heater will automatically switch to LOW heat to save energy.
5. When the air temperature reaches 4° above the set temperature, the heater will turn off. The Heater will cycle off and on in the LOW mode to maintain the set temperature.

All this happens automatically with Laeko Save-Smart® Technology. To deactivate the Save-Smart® function, press Save-Smart® again for continuous high/low heat.

Rev. A 7/15

BASE OSCILLATION

With the Heater on, press the Base Oscillation Button (To start and stop the oscillation function. The oscillation function can be used in any speed and/or timer mode.

LOUVER OSCILLATION

With the Heater on, press the Louver Oscillation Button 📄 start and stop the oscillation function. The oscillation function can be used in any speed and/or timer mode.

TIMER FUNCTION (Figure 3, 3A)

The timer function may be activated when the Heater display is in any function or speed. This function allows you to set the length of time the Heater will run before turning itself off, from 1 hour to 8 hours. Pressing the Timer Button (2) will increase the length of time by 1 hour each time this button is pressed. After the display reflects 8 hours, pressing the Timer Button (3) once more will reset the Heater to run continuously. The Heater will turn off when the set time has elapsed. The unit can be turned back on by pressing the Power Button (4).

AUTOMATIC TEMPERATURE CONTROL

The automatic temperature function will only operate on "High" heat. You cannot set the temperature automatically when the unit is in the low heat mode.

1. To set the room at a specific temperature press the (+) or (-) buttons to the desired temperature. The display will now reflect the (♀) and the temperature will be flashing. The Heater is now in Auto Temperature Mode.

2. When you reach the temperature at which you want to set the unit, the set temperature will flash several times and then the display will return to indicate the current room temperature and will gradually change as the room temperature changes. NOTE: the temperature display does not indicate the temperature of the heated air being emitted by the heater.

3. Once the room temperature reaches 2 degrees above the set temperature, the Heater will shut off. Once the room temperature reaches 1 degree below the set temperature, the Heater will turn back on and continue to cycle off and on to maintain the set temperature.

4. This function will cancel if the (O) button is pressed. The Heater will now be in High heat and run continuously.

NOTE: It is normal for the Heater "fan" to run for approximately 15 seconds when the Heater shuts off after reaching the set temperature.

3

CC23155ES

REMOTE CONTROL:

All the functions performed with the Remote Control work identically to the manual controls. (Figure 5)

1. Install two "AAA" batteries (included).

2. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

3. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.

4. Attach the remote holder to the back of the heater. Slide the remote downward to secure it into the remote holder. (Figure 6) If you lose your remote control, please call Customer Service to order a replacement at 1-800-233-0268, Monday through Friday, between the hours of 8:00 a.m. and 5:00 p.m. EST.

SAFETY FEATURE

1. A thermal overload protector is built in to prevent overheating.

2. If an overheat temperature is reached, the Heater will automatically shut off. It can only resume operation when

the user resets the unit.

RESET INSTRUCTIONS:

1. Unplug the Heater and wait 10 minutes for the Heater to cool down.

2. After the Heater has cooled down, plug the unit into a 120V- electrical outlet and follow the operation instructions described in this manual.

instructions described in this manual

TROUBLE SHOOTING TIPS

If your heater shuts off unexpectedly or fails to operate, the previously mentioned safety feature may have been activated to prevent overheating.

1. Be sure the power cord is plugged into a working electrical outlet.

2. Check your Temperature setting. The Heater may be off because it has reached the desired temperature setting.

3. If your Heater runs for several minutes and shuts off repeatedly, your Heater may require cleaning. See Maintenance section below.

If you have a problem that can not be resolved by the steps listed above, contact Technical Assistance at 1-800-233-0268, Monday through Friday, between the hours of 8 a.m. and 5 p.m. EST.

MAINTENANCE

⚠ WARNING

To reduce the risk of electrical shock and fire please observe the following instructions.

Cleaning the Heater regularly will help to maintain its efficiency.

Always unplug the cord before moving, servicing or cleaning.

NEVER place the Heater in or near water. DO NOT IMMERSE HEATER IN WATER.

Remove the circular cover on the front of the heater and clean the Heater only with a vacuum equipped with a brush attachment; the vacuum will remove the lint and dirt from the surface of the Heater.

Vacuum intake grills every two weeks; this will help to maintain the optimum Heater performance.

Use a toothbrush or other soft bristle brush to gently loosen any dirt not removed by the vacuum.

NEVER attempt to take apart the Heater.

Clean the body of the Heater with a soft cloth only

NEVER use ALCOHOL or SOLVENTS such as gasoline, benzene, paint thinner, or other harsh cleaners.

SERVICING: For servicing, other than general user maintenance, please contact Customer Service at 800-233-0268, Monday through Friday, from 8am-5pm Eastern.

STORAGE: Store the Heater with these instructions in the original carton in a cool, dry place.

DISPOSITION: Corrugated packaging materials are recyclable. For environmentally responsible disposal of this product, contact your local waste service provider or visit www.1800recycling.com®.

WHAT THIS WARRANTY COVERS: This product is warranted against defects in workmanship and/or materials. HOW LONG THIS WARRANTY LASTS: This warranty extends only to the original purchaser of the product and lasts for three (3) years from the date

of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.

WHAT LASKO WILL DO: Lasko will, at its sole option, repair or replace any part of plans that prove to be defective or replace the whole product with the same or comparable model. For all warranty claims, the product must be returned to Lasko Products, Inc. at customer expense with proof of purchase within the warranty period. Contact the Lasko customer service department to obtain a Return Authorization ("RA"). DO NOT return products without an RA or the warranty claim will not be processed.

WHAT THIS WARRANTY DOES NOT COVER: This warranty does not apply if the product was damaged or failed because of accident, improper handling or operation, shipping damage, abuse, misuse, unauthorized repairs made or attempted, or the use of the product for commercial or nonresidential service. This warranty does not cover shipping costs for the return of products to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko following warranty repairs or replacement.

ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY), LAST THREE YEARS FROM THE DATE OF ORIGINAL PURCHASE OR UNTIL THE ORIGINAL PURCHASER OF THE PRODUCT Sells OR TRANSFERS THE PRODUCT, WHICHEVER FIRST OCCURDS AND IN NO EVENT SHALL LASKO'S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY INCLUDE (I) INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER, OR (II) REPLACEMENT OR REPAIR OF ANY HOUSE FUSES, CIRCUIT BREAKERS OR RECEPTACLES. NOTWITHSTANDING ANYTHING TO THE CONTRARY, IN NO EVENT SHALL NOT BE PRACTISED. ANY THIS INFORMATION IS SUBJECT TO ANY CHANGE IN THIS INFORMATION. ANY THIS INFORMATION SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD.

Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state and province to province.

Proof of purchase is required before a warranty claim will be accepted.

CUSTOMER SERVICE

Toll-Free [phone]. Email: [e-mail]

Our Customer Service team is available to assist you with product and service questions, and replacement parts. They can be reached Monday

through Friday, 5am-5pm Eastern. Please have your model number available, as well as the type and style (located on the underside of your

Product). Customer Service Dept., 820 Lincoln Ave., West Chester, PA 18360 (Please do not send product to this location) www.lwkanproducts.com

(Please do not send product to this location) www.laskoproducts.com

PARTS FOR DISCONTINUED, OBSOLETE AND CERTAIN OTHER PRODUCTS MAY NOT BE AVAILABLE. DUE TO SAFETY REASONS, MANY ELECTRONIC COMPONENTS AND MOST HEATER COMPONENTS ARE NOT AVAILABLE TO CONSUMERS FOR INSTALLATION OR REPLACEMENT.

Manual printed in China

INSTRUCCIONES IMPORTANTES - MANUAL DE USO

Lasko®

CALEFACTOR DE CERAMICA ULTRA CON MOVIMIENTO DE CALOR 3D MODELO CC23155