Motion X CC27350 - Heating Lasko - Free user manual and instructions
Find the device manual for free Motion X CC27350 Lasko in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Space Heater |
| Brand | Lasko |
| Model | Motion X CC27350 |
| Dimensions (H x W x D) | 23.5 x 14.5 x 14.5 in (59.7 x 36.8 x 36.8 cm) |
| Weight | 9.5 lb (4.3 kg) |
| Power Source | 120V AC, 60Hz |
| Power Consumption | 1500W (max) |
| Heating Element | Ceramic |
| Heat Settings | High (1500W), Low (750W), Fan Only |
| Thermostat | Adjustable digital thermostat |
| Oscillation | Wide-angle oscillation (70°) |
| Timer | 1-8 hours auto shut-off |
| Remote Control | Yes, full function remote |
| Safety Features | Tip-over switch, overheat protection, cool-touch housing |
| Noise Level | Quiet operation (fan noise only) |
| Recommended Room Size | Up to 300 sq. ft. |
| Filter Type | Washable mesh filter |
| Maintenance | Unplug and wipe with a damp cloth; wash filter every 2 weeks |
| Warranty | 1 year limited |
| Certifications | ETL listed |
Frequently Asked Questions - Motion X CC27350 Lasko
How do I clean the Lasko Motion X CC27350 heater?
Unplug the heater and allow it to cool. Use a damp cloth to wipe the exterior. The intake grille and filter can be vacuumed or washed with mild soap and water. Make sure all parts are completely dry before reconnecting.
Can I use the heater in a bathroom?
No, the Lasko Motion X CC27350 is not rated for bathroom use. It should be kept away from water and moisture to prevent electric shock.
What does the 'Motion X' feature do?
The Motion X feature allows the heater to oscillate and direct heat where you need it. You can adjust the oscillation angle via the remote or panel controls.
How do I set the thermostat?
Press the thermostat button on the control panel or remote. Use the up/down arrows to set your desired temperature. The heater will automatically cycle on/off to maintain that temperature.
Why does the heater turn off unexpectedly?
The heater has safety features like a tip-over switch and overheat protection. If it turns off, check if it has tipped over, if the air intake is blocked, or if the room is too warm. Allow it to cool before restarting.
Is the heater safe for use around pets?
Yes, the cool-touch housing and tip-over safety switch make it safe. However, always supervise pets and place the heater out of reach to avoid burns or chewing cords.
How can I reduce the noise level?
The heater is designed to be quiet. If you hear unusual noise, check for loose parts or debris in the fan. Clean the filter regularly to maintain silent operation. Use the 'Fan Only' mode for white noise.
What do the indicator lights mean?
A blue light indicates power on. A red light indicates the heater is actively heating. The thermostat display shows set temperature. If a flashing light appears, refer to the manual for error codes.
Can I mount the heater on a wall?
No, the Lasko Motion X CC27350 is designed for floor use only. It should be placed on a stable, level surface at least 3 feet away from any wall or furniture.
How do I reset the heater after a safety shutdown?
Unplug the heater and wait 10 minutes for it to cool down. Plug it back in and press the power button. If it does not restart, inspect for blockages and ensure it is on a stable surface.
User questions about Motion X CC27350 Lasko
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual Motion X CC27350 - Lasko and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Motion X CC27350 by Lasko.
USER MANUAL Motion X CC27350 Lasko
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lasko
Model : Motion X CC27350
Category : Heating