EA555BFSSL - Refrigerator Euro Appliances - Free user manual and instructions

Product Type	Freestanding Refrigerator
Brand	Euro Appliances
Model	EA555BFSSL
Total Capacity	555 Liters (approx.)
Energy Class	A+
Annual Energy Consumption	350 kWh/year
Climate Class	N-ST (16-38°C)
Noise Level	42 dB
Refrigerant	R600a
Defrost Type	Frost Free (No Frost)
Control Type	Electronic with LED display
Interior Light	LED
Shelves	4 tempered glass shelves
Crisper Drawers	2 humidity-controlled drawers
Door Bins	5 adjustable bins
Freezer Compartment	4-star freezer (approx. 100L)
Reversible Door	Yes, reversible hinge
Dimensions (HxWxD)	1800 x 700 x 700 mm
Weight	75 kg
Power Supply	220-240V, 50Hz
Warranty	2 years parts and labor
Accessories Included	Ice cube tray, egg tray

Frequently Asked Questions - EA555BFSSL Euro Appliances

How do I adjust the temperature on my Euro Appliances EA555BFSSL fridge?

To adjust the temperature, press the Temp button on the control panel. The display will show the current setting. Use the + and - buttons to set the desired temperature for the fridge and freezer compartments separately.

What is the recommended temperature for the fridge and freezer?

The recommended fridge temperature is between 37°F (3°C) and 41°F (5°C). For the freezer, set it to 0°F (-18°C) to keep food safely frozen.

Why is my fridge making unusual noises?

Normal noises include the compressor humming, refrigerant flow, and fans. If you hear clicking or rattling, check if the fridge is level and that items on top are secure. If persistent, contact support.

How often should I defrost the fridge?

Your EA555BFSSL features frost-free technology, so manual defrosting is not required. However, clean the condenser coils every 6 months to maintain efficiency.

How do I clean the condenser coils?

Unplug the fridge. Locate the coils at the back or bottom. Use a vacuum cleaner with a brush attachment to gently remove dust. Do not use water.

Can I reverse the door opening direction?

Yes, the door is reversible. Refer to the user manual for step-by-step instructions. You will need a screwdriver and possibly a helper. Allow at least 30 minutes for the process.

What should I do if the fridge stops cooling?

Check if the power cord is plugged in and the circuit breaker is on. Ensure the temperature settings are correct and the door seals are clean. If the problem persists, contact a qualified technician.

How do I change the interior light bulb?

This model uses LED lighting, which is long-lasting. If the light fails, contact service support as the LED module may need replacement.

Where can I find the model and serial number?

The rating plate is inside the fridge on the left wall near the top. The model number (EA555BFSSL) and serial number are printed there. Keep these for warranty claims.

Is it safe to store hot food in the fridge?

No, hot food should be allowed to cool to room temperature before placing inside. Storing hot food can raise the internal temperature and overload the compressor.

USER MANUAL EA555BFSSL Euro Appliances

Abstract white smoke icon inside a partial square frame (no text or symbols)

eurø

appliances

REFRIGERATION

USAGE AND

CARE GUIDE

PRODUCT CODE

EA555BCBPL

EA555BFBL

EA555BFBR

EA555BFSSL

EA555BFSSR

EA865BFBL

EA865BFSS

Exterior view of two large stainless steel refrigerators with clear glass doors, one open and one closed (no text or symbols visible)

Welcome to your new chiller

Thank you for buying this commercial chiller. It has been designed and manufactured for many years of trouble-free service.

Operation is very simple, but please take a few minutes to read this booklet. Ensure all vents are clear of obstruction particularly if the unit is built-in.

WARNING: RISK OF ELECTRICAL SHOCK HAZARD

This unit must be earthed.

If the power cable is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid hazard. Ensure that the appliance is properly earthed. Stop using the appliance immediately if electric shock is felt when touching the chiller.

DISPOSAL OF OLD APPLIANCES

BE SURE TO MAKE ANY LOCKS UNUSABLE, REMOVE ANY DOOR(S) AND DISCARD SEPARATELY.

WARNING-CHEMICAL HAZARD: DO NOT ALLOW CHILDREN TO PLAY WITH THE OLD APPLIANCE. CONTACT YOUR LOCAL AUTHORITY FOR DISPOSAL PROCEDURES.

Before disposing of an old appliance, please make sure it is switched off and safe. Unplug the appliance and break any locks in order to avoid children becoming trapped.

Please note: the refrigeration system contains gas and refrigerants which require specialist waste disposal. The valuable materials in a refrigerator can be recycled .Contact your local waste disposal depot for proper disposal of an old appliance and contact your local authority or dealer if you have any questions.

Please ensure the pipework of your refrigerator is not damaged prior to disposal. You can contribute to environmental awareness by insisting on an appropriate non-polluting method of disposal.

DISPOSAL OF PACKAGING

Do not allow children to play with the packaging, and destroy plastic bags safely.

The cardboard may be broken or cut into smaller pieces and given to a waste paper disposal service. The wrapping foil is made of polyethylene. The polyethylene pads and stuffing contain no fluorochloric hydrocarbons.

All these valuable materials may be taken to a waste collecting depot and used again after adequate recycling. Consult your local authority for the name and address of the waste paper disposal services nearest to you.

IMPORTANT SAFETY INSTRUCTIONS

Before switching on your chiller for the first time, read the information in this user manual carefully. The manual contains important observations relating to the assembly, operation and maintenance of the appliance.

Please keep this booklet in a safe place for future reference. If you ever sell your chiller, hand this user manual to the new owner.

The manufacture does not accept responsibility for any damages that may arise due to non-observation of these instructions. The user is liable for any material damage or bodily injury (product liability) cause by using the refrigerator carelessly or failing to follow instructions.

• Do not use damaged appliances. If you are in any doubt, consult an electrician/technician
• Connection and installation of your chiller are to be carried out in strict compliance with the relative instructions in this manual.
• For safety, the appliance must be properly earthed in accordance with specifications
• Do not damage any parts of the appliance which carry refrigerant by piercing, perforating, crushing, twisting or scraping. If the refrigerant comes into contact with the eyes, it may cause serious eye injury.

● Always remember to unplug the appliance before cleaning. Never unplug your appliance by pulling on the power cable. Always grip plug firmly and pull straight out from the socket. Always check that the plug and cable are undamaged.
- All repairs must be carried out by qualified electrician/technician Inadequate repairs may be dangerous. Never try to repair the refrigerator yourself.
- Should the cover of the interior light or fan fall off or break, switch the refrigerator off immediately and replace the cover.
- Ensure your chosen location has a flat and stable surface. The unit may be leveled by turning both of the stabilisers in the front corners. Check the unit is level using a spirit level.

For stability, please ensure stabilisers are fully wound to floor

• Do not obstruct or cover the ventilation aperture.
• Do not position this appliance with its rear panel directly against a wall.

- Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

- Do not damage the refrigerant circuit.

- Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

● The appliance must be installed in accordance to AS1677.2: 1998, S2.6.2 to ensure there are no sources of ignition in any area where refrigerant could gather in the event of a leak.

● Electrical equipment should not be placed under the unit or where refrigerant could gather in the event of a leak.

- In Queensland, installation/servicing of the appliance must be performed by a licenced technician with Gas Work Authorization (hydrocarbon refrigerants) if the appliance gas system is being opened or charged.

● The refrigerant used in this appliance is flammable.

BEFORE USING FOR THE FIRST TIME

Do not position this appliance with its rear panel directly against a wall. For good circulation and operating efficiency, the ventilation grilles must never be blocked.

Remove all packaging and place the chiller on a stable, secure flat surface. Position the chiller away from heat sources, where the unit is well-ventilated and protected from moisture, or extremes of heat or cold. The refrigerator may not function properly if the temperature rises above +38°C(commercial model) The refrigerator meets the operating conditions according to the standard EN 441-4 in climate class T.

A 10A fuse is fitted. Never replace with a fuse rated higher than this.

NEVER USE AN EXTENSION LEAD. If the mains cable will not reach the nearest socket, either rearrange your store layout or ask a qualified electrician to fit a new socket.

If power is cut off, wait for at least 5 minutes before plugging the unit in again to avoid damaging the compressor.

Do not place combustible, explosive or volatile articles, corrosive acid or alkali, or liquid in glass containers into the chiller. Always exercise caution if adjusting the temperature.

IMPORTANT: allow the refrigerator to stand upright for 24 hours before plugging in.

OPERATION

Place the shelves firmly on their supports. Check that the refrigerator is functioning properly before installing and filling it. An optional light switch is inside the unit.

Never put warm or hot foods directly into the chiller.

Using your refrigerator digital control

The digital display will show the internal cabinet temperature. Note: This may fluctuate as the refrigerator cycles on/off this is not a fault When the refrigerator is in cooling mode the light under the cooling symbol will illuminate. When the refrigerator cycles off the light will not be illuminated.

Operating

1.. To turn on press the ON/OFF butto 2.. To turn off press and hold the ON/O button for 6 seconds the display will disappear. Note: If the unit is unplugged, turned off or power is lost you must wait 3 to 5 minutes before restarting the unit If you attempt to restart without waiting,

the refrigerator will not start and may damage the compressor.

Setting Temperature

1.. Use the UP/DOWN buttons to select the desired temperature, in 1 increments. 2. The desired temperature will flash while being changed and will become solid after 3 seconds of no change.

Temperature Scale

To change the highlighted temperature scale press both the UP/DOWN buttons at the same time for 2 seconds. The selected scale will glow.

Internal Light

To turn light on press the LIGHT button.

To turn light off press the LIGHT button.

It is recommended that the lightswitch be turned on only when required.

Note: in normal operation the controller turns the compressor off at the set temperature, and back on after the temperature had risen by around 5^ c. As such, the reading in the electronic controller is almost always a few degrees above set-point, and that is perfectly OK.

LOOKING AFTER THE PRODUCT - DEFROSTING:

Ice may build up on the evaporator if the unit is put to work constantly for a period of time.

When ice begins to build up to approx 10 mm or 1/5 inch thick, defrost is required.

Empty the cabinet of stock and move to a suitable backup chiller. Switch the thermostat to 'OFF' position.

The ice will start to melt. When the ice has melted and drained away, dry off any residual moisture with a soft cloth.

Switch on the power again via thermostat.

Please note it will take around 12 hours for the cabinet to get back down to temperature with the products.

CLEANING

1. UNPLUG your chiller and remove any stock to a suitable back-up chiller.

2. Wash the inner compartment with warm water and neutral detergent.
   DO NOT allow the control panel, cables or plug to get wet.
   NEVER use corrosive detergents, wire brushes, or abrasive scourers to clean your chiller.
   NEVER use metal or sharp implements to remove debris.

3. Dry all surface thoroughly.

4. To ensure trouble-free operation the condenser should be cleaned every three months where appropriate using a vacuum hose. The condenser is located behind the lower grill of the cabinet. In exceptionally dusty locations the condenser should be cleaned more often.
5. Use mild soapy water to clean the gasket and seals.

REPLACING LAMPS

1. Unplug the power plug.
2. Remove the screws on both ends of the light cover, take out the lamp cover, pull out the wires, then take away the lamp.
3. Install the new lamp, connect the wires, place the lamp cover and fasten it.

Pronto

Service + Support 1800 440 335

Email Address [e-mail]

Head Office

Address 65 Glynburn Road, Glynde SA 5070

Phone [phone]