DGSL-25-150-Y3A - Camera Festo - Free user manual and instructions
Find the device manual for free DGSL-25-150-Y3A Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic Linear Slide |
| Model | DGSL-25-150-Y3A |
| Stroke | 150 mm |
| Piston Diameter | 25 mm |
| Operating Pressure | 4 to 8 bar |
| Position Sensing | Yes (Y3A version with proximity switch) |
| Repetition Accuracy | ≤ 0.02 mm |
| Maximum Force | 295 N at 6 bar |
| Guide Type | Recirculating ball bearing guide |
| Cushioning | Self-adjusting pneumatic end-position cushioning |
| Ambient Temperature | -20 to 80 °C |
| Weight | 2.9 kg |
| Material | Aluminum, stainless steel |
| Mounting Position | Any |
| Maintenance | Lubricate with Festo oil every 10 million cycles |
| Safety | Disconnect air supply before servicing |
| Spare Parts Availability | Seals, guide blocks, and sensors available |
| Certifications | CE, RoHS |
Frequently Asked Questions - DGSL-25-150-Y3A Festo
What is the operating pressure range for the DGSL-25-150-Y3A?
The recommended operating pressure is between 4 and 8 bar (60-120 psi).
How do I mount the slide unit?
Mount using the T-slots on the body or the threaded holes on the ends. Ensure the mounting surface is flat and rigid.
What type of lubrication is required?
Use Festo oil OFSW-32 or equivalent. Apply a few drops to the wiper every 10 million cycles or annually.
Can I adjust the cushioning?
The cushioning is self-adjusting and does not require manual adjustment. It adapts to load and speed.
What is the maximum allowable load?
The maximum dynamic load is 295 N at 6 bar. For static loads, refer to the load diagrams in the manual.
How do I connect the proximity switch?
The Y3A variant includes a 3-wire PNP proximity switch. Connect the brown wire to +24V, blue to 0V, and black to the input.
What should I do if the slide moves jerkily?
Check the supply pressure, ensure the guide rails are clean, and verify lubrication. Also check for misalignment.
What is the repeatability accuracy?
The repeatability accuracy is ≤ 0.02 mm, making it suitable for precise positioning tasks.
Can I use the slide in a cleanroom?
Yes, the slide is rated for cleanroom Class 5 (ISO 14644-1) when properly lubricated.
How do I replace the seals?
Order seal kit DS2-25 from Festo. Disassemble the end caps, remove old seals, install new ones with care not to damage the grove.
User questions about DGSL-25-150-Y3A Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual DGSL-25-150-Y3A - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DGSL-25-150-Y3A by Festo.