AUM60B - Range hood Artusi - Free user manual and instructions

Product Type	Range Hood
Brand	Artusi
Model	AUM60B
Width	60 cm
Depth	50 cm
Height (min-max)	60-110 cm
Weight	15 kg
Power Supply	220-240 V ~ 50 Hz
Motor Power	180 W
Extraction Capacity (max)	650 m³/h
Noise Level (max)	65 dB(A)
Number of Speeds	3 + Boost
Controls	Electronic push buttons
Lighting	2 x 2 W LED
Filter Type	Aluminum grease filter + optional charcoal filter
Duct Diameter	150 mm
Installation Type	Wall-mounted or ducted/recirculating
Energy Class	A
Annual Energy Consumption	50 kWh
Grease Filter Efficiency Class	B
Fluid Dynamic Efficiency Class	C
Noise Level Class	C
Warranty	2 years

Frequently Asked Questions - AUM60B Artusi

How do I install the Artusi AUM60B range hood?

Installation should be done by a qualified professional. Ensure the hood is mounted at least 65 cm above the cooking surface for gas hobs or 55 cm for electric. Use the provided template for drilling. Connect the duct to the outlet (150 mm) or use the recirculation kit (charcoal filter required).

How often should I clean the grease filters?

Clean the aluminum grease filters every 3-4 weeks, depending on usage. They are dishwasher safe (low temperature cycle). Dry thoroughly before reinstalling to prevent odors.

Do I need a charcoal filter for recirculation mode?

Yes, if you do not have an external duct, you must install a charcoal filter (not included). It absorbs odors and needs replacement every 3-6 months.

How do I replace the LED lights?

The LED lights are built-in and not user-replaceable. If defective, contact customer service or a qualified technician for replacement.

Why is my range hood noisy?

Normal noise level is up to 65 dB. Excessive noise may be due to loose parts, dirty filters, or improper installation. Check filters and ensure the hood is securely mounted.

Can I use the hood without a duct?

Yes, in recirculation mode. You need to install the charcoal filter and ensure the hood vents back into the room. The exhaust outlet should be covered.

What does the Boost function do?

Boost mode provides maximum extraction for a short period (e.g., 5 minutes) to quickly clear smoke or strong odors. It automatically returns to the previous speed.

How do I reset the filter saturation indicator?

After cleaning or replacing filters, press and hold the timer button for about 3 seconds until the indicator light turns off.

What is the recommended distance between hood and hob?

For optimal performance and safety, install the hood 65-75 cm above gas hobs and 55-65 cm above electric or induction hobs.

Why is the hood not extracting effectively?

Check if the grease filters are clogged, the duct is blocked or too long, or the charcoal filter (if used) needs replacement. Also ensure the room has adequate ventilation for makeup air.

USER MANUAL AUM60B Artusi

APPLIANCES

FOR LIVING

AUM60, AUM75, AUM90,

AUM6ONS, AUM9ONS

AUM6OB, AUM9OB

OPERATION MANUAL

IMPORTANT SAFETY INFORMATION

**Read the complete manual carefully before installation**

Warnings:

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, PLEASE OBSERVE THE FOL-LOWING:

1. Installation and electrical work must be done by a qualified person in accordance with all ap-plicable codes and standards
2. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person to avoid a hazard. Any modifications that may be required to the electrical system for the installation of the range hood must only be made by qualified electri-cians.
3. Before servicing or cleaning unit, switch power off at the service panel. Lock panel to prevent power from being switched on accidentally.
4. Use this unit only in the manner intended by the manufacturer.
5. Sufficient air is needed for combustion and exhausting of gases through the chimney of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer's guidelines and safety standards, and the local code authorities.
6. When cutting or drilling into wall or ceiling, be carefully to do not damage existing electrical wiring and other hidden utilities.
7. Ducted fans must always be vented to the outdoors.
8. To reduce the risk of fire, use only metal ductwork.
9. This unit must be grounded.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

1. Never leave surface units unattended at high settings. Boil-overs cause smoke and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.
2. Always turn hood ON when cooking at high heat.
3. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.
4. Use proper pan size. Always use cookware appropriate for the size of the surface element.

WARNING

TO REDUCE THE RICK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:

1. SMOTHER FLAMES with a close-fitting lid, cookie sheet or metal tray, and then turn off the burner. If the flames do not go out immediately, evacuate and call the fire department.
2. NEVER PICK UP A FLAMING PAN. – You may be burned.
3. DO NOT USE WATER, including wet dishcloths or towels – a violent steam explosion will result.
4. Use an extinguisher ONLY if:

You know you have a Class ABC extinguisher and you already know how to operate it.

The fire is small and contained in the area where it started.

The fire department is being called.

You can fight the fire with your back to an exit.

CAUTION

1. To reduce the risk of fire and to properly exhaust air, be sure to duct air outside. Do not vent exhaust air into spaces within walls or ceiling or into attics, crawl spaces or garages.
2. Take care when using cleaning agents or detergents.
3. Avoid using food products that produce flames under the range hood.
4. The range hood must only be used for the exhaust of cooking fumes in home kitchens. The manufacturer disclaims all liability for any other use of the appliance.
5. Two installers are recommended because of the large size and weight of this hood.
6. Use with approved cord-connection kit only.
7. Please read specification label on product for further information and requirements.

INSTALLATION INSTRUCTIONS

Before You Start...

1. Read this manual carefully and completely.
2. The range hoods conform to related appliances standards. Please check your local building codes for any additional requirements.
3. The appliance has been manufactured as class I, there-fore ground connection is necessary. The range hood must be installed so that that the plug is easily accessible.

Unpacking

Remove the packaging with the product in place. Cut off the packing ribbons and carefully cut open the packaging (do not cut too deeply), remove the packaging. Check that the product is free from transport damage. Any damage shall be reported imme-diately to the carrier or seller. Damage, faults and missing parts must be reported immediately to the seller

Installation preparation

1. The range hood should be mounted at a distance of 600mm from the cooking surface for safety & optimum performance ( If the instructions for installation of the gas hob specify a greater distance, this has to be taken into account.)
2. Make sure the inner cabinet size appropriate for installing the range hood.

Fixing to the ceiling cabinet

1. Before mounting the hood, plug in and test all functions for proper operation.
2. Removed the filters from the bottom of the hood to pre-vent damage during the installation.
3. Connected duct tube (if included with the range hood) to the top of the range hood using duct tape on all seals.
4. With assistance, hold the hood temporary in position ensuring the bottom is above the minimum clearance for the cooking surface. Mark on the cabinet the holes for the four mounting screws.
5. Drill the holes at the distances indicated.
6. Mount the hood on the cabinet screws and adjust for appropriate position. When the hood has been adjusted, secure unit by tightening screws.

Technical line drawing of a mechanical component with a cylindrical top and base, showing no text or symbols.

Technical line drawing of a mechanical device with a transparent housing and base platform (no text or symbols)

AUM60/90 AUM60/90NS AUM60B/90B

Technical line drawing of a mechanical component with no visible text or symbols

[NO TEXT]

Technical line drawing of a roof structure with mounting bracket and side panel (no text or symbols)

Line drawing of a multi-level kitchen chimney with chimney and ventilation duct (no text or symbols)

Simple line drawing of a door with a handle and screwdriver (no text or symbols)

AUM75X

REMEMBER!

☐ The distance between the top of the hob and the lowest part of the cooker hood must be at least 600mm.
☐ If a two-part connection tube is used, the lower section must sit outside the upper sec-tion.
☐ Do not connect the cooker hood exhaust to a duct used to circulate hot air or vent steam from another appliance.
□ Always use protective gloves when installing the appliance!

USE AND CARE INSTRUCTIONS

Operations

1. For optimum performance in removing cooking odors, it is recommended that you turn on your range hood prior to cooking and you leave it operating for 15 min-utes after cooking.
2. Clean the surfaces of the range hood regularly using a non-abrasive detergent.
3. The anti-grease filters capture the grease particles suspended in the air. They will accumulate grease and dirt depending on the frequency of the use of your range/cook top.
4. In order to prevent a fire hazard, it is recommended that you clean the filters at least every 2 months
   □WARNINGS: Do not attempt to remove the fil-ters while the Range Hood is operating.
   ☐ Disconnect the electrical plug prior to any maintenance.
   ☐ This appliance is not intended for use by young children or infirm persons without supervision.
   ☐ There should be adequate ventilation in the room when the Range Hood is used at the same time as other fuel burning appliances.

DESCRIPTION OF THE SWITCH

Electric switch

■ Push "Power" button, the motor will start running at high speed (Indicating lights in "Power" and "High" buttons are on). (AUM60/90, AUM60B/90B)
■ Push "Light" button, the lights will be on (Indicating light in "Light" button is on).
■ Push "Low" button, the motor will run at low speed(Indicating lights in "Power" and "Low" buttons are on).
■ Push "Mid" button, the motor will run at middle speed((Indicating lights in "Power" and "Mid" buttons are on).
■ Push "High" button, the motor will run at high speed((Indicating lights in "Power" and "High" buttons are on).
■ Push "Highest" button, the motor will run at high speed((Indicating lights in "Power" and "Highest" buttons are on).
■ When the machine is working, the first time to press the power button then enter 3-minute delayed turn off state, press the power button again will turn off directly.(AUM75X)

The lights and motor work at the same time when plug the power.(AUM60/90NS)

CARE AND CLEANING

General

Regular maintenance is required to ensure that the cooker hood functions properly. This is especially true of the grease and charcoal filters.

Clean the fan and other surfaces of the cooker hood regularly with a cloth dipped in denatured alcohol or a non-abrasive liquid cleaner.

The charcoal filter cleans the circulating air in the room. Such filters cannot be cleaned or recycled and must be replaced at least every four months. The speed at which the charcoal filter becomes saturated depends on how often the fan is used, the type of food that is cooked and how often the grease filter is cleaned.

To prevent the risk of fire and to ensure that the cooker hood functions properly, the grease filter must always be cleaned as instructed below when the display indicates the need or at least every two months.

Cleaning the grease filter

Remove the filter from the cooker hood and clean it in a solution of water and neutral cleaning liquid. Leave the filter to soak in the solution for a while.

- Rinse thoroughly with hot water and leave the filter to dry.

- The filter can also be cleaned in a dishwasher. The color of the grease filter may change after a few washes. This is normal.

Line drawing of a hand holding a small object on a U-shaped metal shelf (no text or symbols)

NB:

If you clean the grease filter in the dishwasher: load only the grease filter and no other items as food particles from dishes can fasten in the filter.

☐ DO NOT let dirt build up on the hood
☐ DO NOT use steel wool or steel brushes to clean the hood
☐ DO NOT leave salt solutions, disinfectants, bleaches or cleaning compounds on the hood for any length of time as they may damage the stainless steel.
Rinse after use with clean water and wipe dry with a clean cloth.

Replacing the LED lights

Depending on your model of hood, there are two possible types of lighting, halogen and LED. The illumination is designed for use during cooking and not for prolonged general illumination of your kitchen. Prolonged use of the lights may reduce the life time of the LED lights.

WARNING: Do not touch or change lights while the hood is operating.

Use only the same LED lights as the original specification. Re-placement lights are available through the dealers.

1. Take off the filters from hood.

Technical line drawing of a mechanical assembly or enclosure with no visible text or symbols

Line drawing of a hand holding a rectangular object, no text or symbols present

Line drawing of a cabinet or enclosure with ventilation grilles and mounting holes (no text or symbols)

AUM75X

AUM60/90

AUM60/90NS

AUM60B/90B

2. Take off the two screws and replace the LED lights by reversing the steps.

Technical line drawing of a rectangular electronic device with internal components and mounting holes (no text or symbols)

Take off two screws

NB:

The light is only meant for use during cooking and not for illuminating the surroundings for longer periods. If the light is used for longer periods, this will considerably shorten the burn time of the lights.

Recycling

This appliance complies with European Community directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). By ensuring that this product is recycled responsibly, the user helps prevent possible negative impact on the environment.

NB:

Dispose of this product responsibly. Irresponsible disposal can result in negative environmental impact or personal injury.

Symbol of a trash bin with crossed lines indicating no waste or discharge (no text or labels)

Under no circumstances may this extractor fan be disposed of as household waste. It must be taken to a recycling centre for electrical and electronic equipment.

This product must be disposed of in accordance with local legislation.

For more information on disposal, recycling and reuse of this product, contact your local authority, your household waste collection service or the store where you purchased the product

Hood Size & Wiring diagram:

AUM60/90

AUM60/90NS

AUM60B/90B

AUM75X

Trouble Shooting Guide

Problem	Possible Reason	Solution
Hood doesn't turn on.	No electrical supply.	Check the plug is connect-ed. Check the plug is connect-ed.
	Power cord is damaged	Contact technician service
Poor Airflow	Aluminum grease filters clogged	Clean the filters and replace when dry.
	Charcoal filters clogged. Re-circulating mode only.	Replace the charcoal filters.
Hood is vibrating	Hood is not secured in place	Check the installation of hood.Tighten mounting screws.
Motor running but no air flow	Butterfly valve jammed.	Contact technician service
Motor stops after a few minutes	High temperature safety device activated.	The kitchen is not sufficient-ly ventilated.
	The hood is installed too near the cooking surface.	The hood must be at least 61cm (24") from the stove
Strong cooking smell.	Fan speed too low	Use one of the higher set-tings.
	Charcoal filters not installed.	n re-circulating mode, char-coal filters must be installed.
Oil dripping onto stove.	Aluminum grease filter satu-rated.	Wash the aluminum grease filters
Whirring sound	Something in contact with fan blade.	Contact technician service
Lights are working but fan isn't		Contact technician service
Fan is working but lights are not		Contact technician service

GUARANTEE AND SERVICE!

Before booking a service call, read the Trouble Shooting Guide above, for more information on guarantee and

service conditions, please contact local dealer.

Important

The AUM60NS and AUM90NS versions do not have a switch panel and are hard wired to operate at speed 2 with the lights. This ensures that when the cooktop is on, the rangehood will always be on.

The rangehood will not operate unless the isolation switch is in the ON position.

Wiring between the isolations switch, cooktop and rangehood must be in accordance with local regulations.

graph TD
    A["Mains in"] --> B["Isolation switch"]
    B --> C["Rangehood"]
    B --> D["Electric cooktop"]

Worldwide Appliances Pty Limited

A.B.N. 45868077422

Distributed by Eurolinx pty Ltd

Office:

48-50 Moore Street, Leichhardt N.S.W 2040 Post:

Locked Bag 3000, Annandale, N.S.W 2038

P: 1300 694 583

WARRANTY REGISTRATION

Your ongoing satisfaction with your artusi product is important to us. We ask that you complete the enclosed Warranty Registration Card and return it to us so that we have a record of the artusi product purchased by you.

PRIVACY

Worldwide Appliances respects your privacy and is committed to handling your personal information in accordance with the National Privacy Principles and the Privacy Act 1988 (Cth). A copy of the Worldwide Appliances Privacy Policy is available at www.artusi.com.au. Worldwide Appliances will not disclose any personal information set out in the Warranty Registration Card (“Personal Information”) without your consent unless required by:

1. law;

2. any Worldwide Appliances related company;

3. any service provider which provide services to artusi or assist artusi in providing services (including repair and warranty services) to customers. Our purpose in collecting the Personal Information is

to keep a record of the artusi product purchased by you, in order to provide a better warranty service to you in the unlikely event that there is a problem with your artusi product. Worldwide Appliances may contact you at any one or more of the address, email address or telephone numbers set out in the Warranty Registration Card. Please contact artusi on 1300 694 583 should you not wish to be contacted by Worldwide Appliances.

WARRANTY

1. Warranty

Worldwide Appliances warrants that each artusi product will remain, for a period of either 12 months or 24 months of warranty. All Warranties are valid from the original date of purchase, And warranty claims must be accompanied by the proof of purchase.

24 months warranty products:

All Built-in Appliances – Limited to Ovens, Gas, Induction and Electric Cooktops, and All Rangehoods. Freestanding Cookers - Gas and Electric Models (900mm Width).

Dishwashers - Freestanding, Fully Integrated, Semi Integrated and built-in. All Wine coolers. All Dryers. Freestanding Cookers - Gas and Electric Models in 50cm, 54cm and 60cm Widths Portable Appliances* - Benchtop Models and Portable Gas Models

2. What is not Covered by the Warranty.

The Warranty does not apply if an artusi product is defective by a factor other than a defect arising in the manufacture of the artusi product, including but not limited to:

(a) damage through misuse (including failure to maintain, service or use with proper care), neglect, accident or ordinary wear and tear (including deterioration of parts and accessories and glass breakage);

(b) use for purpose for which the artusi product was not sold or designed;

(c) use or installation which is not in accordance with any specified instructions for use or installation;

(d) use or operation after a defect has occurred or been discovered;

(e) damage through freight, transportation or handling in transit (other than when Worldwide Appliances is responsible);

(f) damage through exposure to chemicals, dusts, residues, excessive voltage, heat, atmospheric conditions or other forces or environmental factors outside the control or Worldwide Appliances;

(g) repair, modification or tampering by the purchaser or any person other than Worldwide Appliances, an employee of Worldwide Appliances or an authorised artusi service contractor ^* ;

(h) use of parts, components or accessories which have not been supplied or specifically approved by artusi.

(i) damage to surface coatings caused by cleaning or maintenance using products not recommended in the artusi product handbook provided to the purchaser upon purchase of the artusi product;

(j) damage to the base of an electric oven due to items having been placed on the base of the oven cavity or covering the base, such as aluminium foil (this impedes the transfer of heat from the element to the oven cavity and can result in irreparable damage); or

(k) damages, dents or other cosmetic imperfections not affecting the performance of the artusi in respect of an artusi product purchased as a “factory second” or from display

The Warranty does not extend to light globes used in artusi products.

3. Domestic Use

Each artusi product is made for domestic use. This Warranty may not extend to artusi products used for commercial purposes.

4. Time for Claim under the Warranty

You must make any claim under this Warranty within twenty eight (28) days after the occurrence of an event which gives rise to a claim pursuant to the Warranty, by booking a service call on the telephone number below.

5. Proof of Purchase

Customers must retain proof of purchase in order to be eligible to make a warranty claim in respect of an artusi product.

6. Claiming under the Warranty

Customers will bear the cost of claiming under this Warranty unless Worldwide Appliances determines the expenses are reasonable, in which case the customer must claim those expenses by providing written evidence of each expense to Worldwide Appliances at the address on the Warranty Registration Card.

7. Statutory Rights

(a) These terms and conditions do not affect your statutory rights.

(b) The limitations on the Warranty set out in this document do not exclude or limit the application of the consumer guarantees set out in the Act or any other equivalent or corresponding legislation in the relevant jurisdiction where to do so would:

(i) contravene the law of the relevant jurisdiction; or

(ii) cause any part of the Warranty to be void.

(c) Worldwide Appliances excludes indirect or consequential loss of any kind (including, without limitation, loss of use of the artusi product) and (other than expressly provided for in these terms and conditions) subject to all terms,

conditions and warranties implied by custom, the general law, the Act or other statute.

(d) The liability of Worldwide Appliances to you

for a breach of any express or non-excludable implied term, condition or warranty is limited at the option of Worldwide Appliances to:

(i) replacing or repairing the defective part of the artusi product;
(ii) paying the cost of replacing or repairing the defective part of the artusi product;
(iii) replacing the artusi product; or
(iv) paying the cost of replacing the artusi product.
(e) Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

8. Defects

Any part of an artusi product deemed to be defective and replaced by Worldwide Appliances is the property of Worldwide Appliances.

Worldwide Appliances reserves the right to inspect and test artusi products in order to determine the extent of any defect and the validity of a claim under the Warranty.

All warranty service calls must be booked via the customer care department. The team can be contacted on 1 300 85 64 11 option 1 or [e-mail]

01082016

DON'T FORGET TO REGISTER YOUR WARRANTY ONLINE NOW AT www.eurolinx.support

TO REGISTER YOUR WARRANTY