KGC26KLA - Water heater KELVINATOR - Free user manual and instructions
Find the device manual for free KGC26KLA KELVINATOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Brand | Kelvinator |
| Model | KGC26KLA |
| Capacity | 26 Gallons (approx. 98 Liters) |
| Type | Storage Tank Water Heater |
| Power Source | Electric, 240V / 4500W dual elements |
| Dimensions (Height x Diameter) | Approx. 60.5 x 20.5 inches (153.7 x 52.1 cm) |
| Weight (Empty) | Approx. 150 lbs (68 kg) |
| Energy Efficiency | Uniform Energy Factor (UEF) approx. 0.94 |
| First Hour Rating | Approx. 62 gallons |
| Maximum Temperature | 160°F (71°C) |
| Pressure Rating | 150 psi (1.03 MPa) |
| Material | Steel tank with ceramic lining |
| Insulation | Foam insulation, R-value 16 |
| Anode Rod | Magnesium anode rod |
| Temperature & Pressure Relief Valve | Included |
| Installation Type | Indoor, upright installation |
| Water Connection | 3/4 inch NPT |
| Maintenance | Drain and flush annually; check anode rod every 3 years |
| Safety Features | Thermal cut-off, overheat protection, T&P relief valve |
| Warranty | 6 years tank and parts; 1 year labor |
| Certifications | UL listed, Energy Star qualified |
| Spare Parts Availability | Heating elements, thermostats, anode rods, T&P valves available |
| Repair Kit | Replacement element and gasket kit sold separately |
Frequently Asked Questions - KGC26KLA KELVINATOR
What is the capacity of the Kelvinator KGC26KLA water heater?
The model number indicates a capacity of 26 gallons (approx. 98 liters), which is suitable for 2-3 person households.
How do I adjust the temperature on the KGC26KLA?
Locate the thermostat access panel on the side of the tank. Use a flathead screwdriver to adjust the dial to your desired temperature, typically 120°F (49°C) for safety and efficiency.
Does the KGC26KLA require a dedicated electrical circuit?
Yes, this electric water heater requires a dedicated 240V, 30-amp circuit with proper grounding. Consult a licensed electrician for installation.
How often should I flush the tank?
It is recommended to drain and flush the tank at least once a year to remove sediment buildup, which can improve efficiency and extend the unit's lifespan.
What does the T&P relief valve do?
The Temperature & Pressure Relief Valve automatically opens if the internal temperature or pressure exceeds safe limits, preventing potential explosions. Test it annually by lifting the lever.
Why is my water heater producing rusty or bad-smelling water?
Rusty water often indicates a failing anode rod. Replace the magnesium anode rod every 3-5 years. Sulfur smell may be due to bacteria; chlorinating the tank can help.
How do I know if the heating element is faulty?
If the water is lukewarm but not hot, one element may be burned out. Use a multimeter to test for continuity across the element terminals; replace if open.
What is the recommended temperature setting?
The U.S. Department of Energy recommends 120°F (49°C) to balance energy savings and prevent scalding. However, if you have a dishwasher, 140°F (60°C) may be needed.
Can I install the KGC26KLA outdoors?
This model is designed for indoor installation only. Outdoor exposure can damage the electrical components and void the warranty.
Where can I find replacement parts?
Replacement parts such as heating elements, thermostats, and anode rods are available at most hardware stores or online retailers. Use the model number KGC26KLA for compatibility.
User questions about KGC26KLA KELVINATOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual KGC26KLA - KELVINATOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KGC26KLA by KELVINATOR.