AHA-RX11M - Cassette player LG - Free user manual and instructions

Brand	LG
Model	AHA-RX11M
Product Type	Portable Cassette Player
Dimensions (W x D x H)	Approx. 140 x 100 x 35 mm
Weight	Approx. 300 g (without batteries)
Power Source	2 x AA batteries (1.5V each) or AC adapter (DC 3V)
Playback Media	Compact Cassette tapes (Type I, II, IV)
Controls	Play, Stop/Eject, Rewind, Fast Forward, Pause, Volume
Output	3.5mm stereo headphone jack
Motor	DC motor with belt drive
Speed Stability	±2% wow and flutter
Auto Stop	Yes, at end of tape
Recording Function	Not available (playback only)
Battery Life	Approx. 8 hours with alkaline batteries
Included Accessories	None (unit only)
Maintenance	Clean tape heads and pinch roller regularly with isopropyl alcohol
Safety Instructions	Do not disassemble; avoid moisture; keep away from magnetic fields
Repairability	Contact LG service center for repairs; belt replacement possible by qualified technician

Frequently Asked Questions - AHA-RX11M LG

What type of batteries does the LG AHA-RX11M use?

The LG AHA-RX11M uses two AA batteries (1.5V each). Alkaline batteries are recommended for longer playback time.

How do I clean the tape heads?

Use a cotton swab lightly moistened with isopropyl alcohol (90% or higher) to gently wipe the tape heads, pinch roller, and capstan. Allow to dry completely before playing a tape.

Can I record with this cassette player?

No, the LG AHA-RX11M is a playback-only cassette player. It does not have a recording function.

Why is the sound distorted or slow?

This may be due to a worn belt or dirty heads. Try cleaning the heads first. If the problem persists, the belt may need replacement by a technician.

How do I replace the belt?

Belt replacement requires opening the unit. Remove the battery cover and screws to access the mechanism. Use a compatible belt (size approximate). We recommend having it done by a qualified technician.

Does it have an auto-stop feature?

Yes, the LG AHA-RX11M features auto-stop which disengages the mechanism when the tape reaches the end.

What is the battery life?

With fresh alkaline AA batteries, you can expect approximately 8 hours of continuous playback.

Can I use an AC adapter?

Yes, you can use an AC adapter with DC 3V output and a compatible plug (check polarity). It is not included with the unit.

What headphones are compatible?

Any headphones with a 3.5mm stereo plug will work. Avoid using headphones that require high power as they may not achieve sufficient volume.

Why does the tape not move when pressing play?

Check if the batteries are charged or the AC adapter is connected. If the motor does not run, the belt may be broken or the motor may be faulty. Inspect and replace if necessary.

USER MANUAL AHA-RX11M LG

Please read this manual carefully before operating your set

Earphone with remote control

Battery case

Mini-compo charger

Carrying case

Microphone

PNO:132SSN907P

To install the battery(AA/R6)

1 Open the cover of the battery case and insert the battery

2 To join the battery case with the set, insert everything correctly in the inlet and turn a screw tightly.

To detach the battery case, turn the screw in the opposite direction.

To install the rechargeable battery

Open the battery cover, insert the battery and push and lock the battery cover to the direction of the arrow in the NO 5 position. (To protect the A part)

SET

(RIGHT SIDE)

(CHARGER)

To charge the battery

① Put the battery into the charger making sure the ② and ③ are correctly positioned.
② The Red 1 indicator will light.
① Charging time will take about 3\~4 hours.
① The charger and the battery may become warm
during charging, but it's no cause for concern

Do not charge more than 8 hours

Over charge will cause the battery life to reduce

- You can listen to the sound from the speaker during charging when you put the set into the charger.

DISPLAY

REMOTE CONTROL

Dolby-NR switch

When playback a Dolby-NR processed tape, set this switch to 'ON'. Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. 'Dolby' and the double-D symbol are trademarks of the Dolby Laboratories Licensing Corporation.

To charge the battery with the set

idity Charge(Stop the function)

Put the battery into the your set.
① Fix the set in the charger with the fixture
① Red 2 indicator will light during charging.
④ Charging time will take about 2 hours.
⑤ Red 2 indicator will go out when charging is completed

mal charge(Play the function)

① You can listen to the sound from the speaker during charging.
② If you lift up the fixture, the sound will stop to protect the noise.
① Charging time maybe different according to the using condition.
① If you stop all functions during normal charge, the charge mode change to rapidity charge.

rounding Operation

▶ To listen the surround sound, press the SURROUND button.
▶ You can't listen the surround sound whilst listening to the FM mono broadcast or mono cassette.
▶ Press the SURROUND button to reduce the noise when listening to the FM stereo broadcast.
▶ Red 2 indicator will light when you listen to the sound from the speaker.

- When you remove the battery or the battery power is consumed during playback or recording, you can't open the cassette door. In this case, insert the battery into the set again or replace the battery with a new one.

• Charge the rechargeable battery before using it for the first time.
• When you do not use the sat for a long time, remove the battery to avoid any damage caused by battery leakage and corrosion.
• The rechargeable battery may be charged approximately 500 times.
• When the CHARGER will not be used for a long period of time, unplug it from the AC outlet.
• Avoid listening to the set while driving, cycling or operating any motorized vehicle.
  Listen at moderate volume to avoid hearing damage. If you experience a ringing in your ears, reduce volume or discontinue use.
  Unlock the HOLD switch before operating

(Approx.hours)

Battery	Playback	Listening-in
Rechargeable battery	9	9
Rechargeable battery +Alkaline battery	40	40
Alkaline battery	28	28

▶ Battery He maybe different according to the using condition, manufacture corporation and production years and months.
▶ Charge the rechargeable battery or replace the battery with a new one in following situation
Light the indicator
② Not work the function buttons.
① The tape speed slows down or noise increases.
④ Stop playback or recording and you can't open the cassette door

sette Section

Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Hz\~10KHz Recording system . . . . . . . . . . . . . . . . . . . . . AC class Tape speed 4.75cm/sec

to Section

Frequency range

87.50-108.00MHz

rger

AC operation . . Refer to the indicated voltage on

Output power 1.5W+1.5W

Dimensions(W×H×D) 300×144.5×175mm

Weight 1.5kg

eral

Power requirements - . . . . . AA/R6 battery(1.5V) Rechargeable battery(1.2V)

Output power 5mW+5mW
Eamphone/Bermote Control jack . . . . 13/02.5mm
MIC jack 3.5mm
Dimensions(W×H×D) - - - 108.5×79×23.5mm
weight

Design and specifications are subject to change without notice for improvement.

Introduction

To insert the tape

Slide OPEN switch to the direction of the arrow to open the cassette door.

To remove the tape

① You can't opening the cassette door during playbook or recording.

② Keep all the functions to stop before opening the cassette door.

③Press the STOP button before opening the cassette door and open the cassette door to remove the tape.

To connect the plug & To adjust the volume

HOLD switch

The HOLD function locks the set and the remote control separately to prevent them from operating when you accidentally press a button. Unlock it before operating. To lock

Slide HOLD switch to the direction of the arrow. To unlock

Slide HOLD switch to the opposite direction of the arrow. : If you set the HOLD switch to lock position or press the operating buttons in lock position, the "hold" indicator will blinks 5 times.(Only the remote control)

PLAY mode

① To playback one side, set the MODE switch to "二"

② To playback both sides continuously, set the MODE switch to "☐"

EQ(equalizer)

Your remote control is equipped with an equalizer. You can select 4 different settings(BALLAD, DANCE, NORMAL, X LIVE) To select sound you want, press the EQ button on the remote control during playback or listening-in.

Function switch on the set

▶ Side the function switch to the direction of the arrow which you wish to operate.

Cassette Operation

Repeat play

1 When pressing the RECALL button on the remote control once during playback, the tape is rewound to a point approximately 8 seconds before the point where the button was pressed and playback resumes automatically.

2 When pressing the RECALL button twice during playback, the tape is rewound to a point approximately 20 seconds.

3 When pressing the RECALL button for 2 seconds during playback, playing track is played repeatedly, until you press the OFF(■) button.

The repeat section is different to a winding quantity of the tape.

Radio Operation

To preset the station

- If there is "TUN" indicator on the display, clear it by pressing the MENU button.

1 Tune to a desired station

2 Press the MEMORY button once.

3 While the "W" indicator is sinking, select the memory channel number by using the FF or REW button.

4 Press the MEMORY button within 5 seconds.

5 Continue to enter any FM stations until up to 15 stations are entered into preset memory.

6 To tune to a preset station.

when the radio is on, press the FF or REW button on until your desired memory channel number is shown on the display.

Radio Operation

To delete the preset station

1 Tune to a desired preset station. 2 Press the EQ(PRESET DELETE) button more than 5 seconds.

To operating the radio(FM only)

= If there is not "TUN" indicator on the display, turn on "TUN" by pressing the MENU button.

MAIN SET

① Slide the function switch to the direction of 'RADIO CN' for more than 2 seconds. (Press ◀ button on the remote control for more than 2 seconds)

② Set MODE switch to STEREO to listen to a FM stereo broadcast.

① Slide the function switch to the direction of 'FF+' or 'REW' to tune to a desired station (Press the FF or REW button to tune to a desired station)

Manual tuning: Slide the function switch one by one to change the station.

(Press the these buttons one by one to change the station)

Automatic tuning: Slide the function switch for more than 2 seconds.

(Press the these buttons for more than 2 seconds)

To turn off the radio, side the function switch to the direction of "RADIO OFF"

To get more clear reception:

1. Extend the author and

▶ Extend the all phone cord. ▶ Set MODE switch to "MONO"

Cassette Operation

To operating the cassette

MAIN SET

① To start playback, slide the function switch to the direction of "TAPE" once.

To change the tape side, slide the function switch to the direction of 'TAPE' once during playback.

① To fast-forward the tape, slide the function switch to the direction of 'FF +' once during stop mode.

To rewind the tape, slide the function switch to the direction of "REW" once during stop mode.

③ To stop the tape, slide the function switch to the direction of "■ RADIO OFF"

REMOTE CONTROL

To start playback, press the ◀ button once.

To change the tape side, press the ◀ button once during playback.

To fast-forward the tape, press the FF(+) button once during stop mode.

④ To rewind the tape, press the REW(-) button once during stop mode.

To stop the tape, press the OFF(■) button.

Intro scan(At stop position)

■ How to search for a particular track on the current cassette

1 Slide the function switch to the direction of 'FF+' or 'REW-' for more than 2 seconds. (Press 'FF+' or 'REW-' on the remote control for more than 2 seconds)

2 Slide the function switch to the direction of TAPE

button on the remote control when music of you want is played)

SLEEP Function

This function shuts the set off automatically after the selected time has elapsed.

1 Press the MENU button once at the stop mode, the "SLEEP" indicator will flash in the display.

2 Press the FF or REW button to select a desired minute. 20 → 50 → 60 →

A

3 Press the MEMORY button to complete the time set.

▶ Select the “—” indicator when set a minute.

To review the sleep time

▶ Press the MENU button once at the stop mode. The sleep time elapsed will be shown in the display.

WAKE Function

This function turns the set on automatically after the selected time has elapsed (FM only).

1 Press the MENU button twice at the stop mode. The "LIKE" indicator will flash in the display.

2 Press the FF or REW button to set the hour. (You can select to maximum 12 hours)

3 Press the MEMORY button again to set the minutes.

(You can select to maximum 50 minutes with 10 minutes step)

5 Press the MEMORY button to complete the time set.

To cancel the wake function

Select the "LOOD" indicator when set a time. Once and give the power/cover on the set

To review the wake time

▶ Press the MENU button twice at the stop mode. The wake time elapsed will be shown in the display.

ASAP(Auto search and play)

▶ Each time the FF(ASAP-) or REW(ASAP-) button is pressed during playback, the next or previous track is selected and played. (You can repeatedly and continually press the button maximum 15 times)

▶ Press the FF(ASAP+) or REW(ASAP-) button during auto search, to reduce or append the selected track number.

▶ Each time it passed the mute section, the ASAP number on the display is reduced automatically during auto search.

ex]

ASAP3→ASAP2→ASRP1

- The ASAP function may not operate properly in the following situation.

▶ There are noises in the spaces between tracks.

- A blank space is less than 4 seconds long. - A track includes a long pause or continues at low volume for several seconds.

Mute section skip function

① During playback if the mute section (about 15 seconds) is found it will pass through the mute section at high speed to the next playback point.

After finishing playback of the first side, it will pass through the mute section at high speed to the first playback point of the reverse side

This function works only in the “(二)” position of the MODE switch.

Recording Operation

1 Insert a blank cassette.

2-A Tune to the station which you wish to record from.

2-B. Plug the microphone into the MIC jack.

3 Press the REC(100 ● ●) button on the set twice for 1 sec to begin recording.

4 Press the ■ OFF button to finish recording.

1. Recording levels have been preset at the factory under optimum conditions and cannot be changed.

2. You can record on one side at a time only.

3. If the tape is wound up during record, stop playback and you will hear the Beep(pi-)

Maintenance

Cleaning the head

▶ Wipe the head, pinch-rollers and the capstans with a cotton swab moistened with alcohol after every 50 hours of use.

▶ Do not insert a cassette tape before the alcohol has dried completely.