MFD ALM044 - Synthesizer ALM - Free user manual and instructions

Type	Desktop Synthesizer
Model	MFD ALM044
Brand	ALM
Power Supply	12V DC, 500mA (center positive)
Dimensions	160 x 128 x 40 mm
Weight	0.8 kg
Audio Outputs	1x 1/4" TRS stereo headphone, 2x 1/4" TS mono line out
Audio Inputs	1x 1/4" TS external audio input
MIDI	MIDI In, MIDI Out (3.5mm TRS type B)
CV/Gate	2x CV outputs (0-5V), 1x Gate output (0-5V)
Controls	Rotary knobs, push buttons, 16-step sequencer
Display	8-character alphanumeric LED
Sound Engine	2-operator FM synthesis with analog filter
Polyphony	4 voices max
Effects	Delay, Reverb (digital)
Memory	64 patch locations, 64 sequence patterns
Construction	Aluminum front panel, steel chassis
Cleaning	Wipe with a dry, soft cloth; avoid solvents
Safety	Use only supplied power adapter; keep away from moisture
Repairability	Module replacement; consult authorized service center

Frequently Asked Questions - MFD ALM044 ALM

How do I connect the MFD ALM044 to my computer?

Use a MIDI interface with 3.5mm TRS type B cables for MIDI In/Out, or connect via USB if the computer has a USB-MIDI host. The device does not have built-in USB, so an adapter is required.

What power adapter does the MFD ALM044 require?

It requires a 12V DC, 500mA power supply with a center-positive 2.1mm barrel jack. Using an incorrect adapter may damage the device.

Can I use the MFD ALM044 with Eurorack modular systems?

Yes, it has CV/Gate outputs that can control Eurorack modules. However, it is not Eurorack format itself; it is a desktop unit.

How many voices can the MFD ALM044 play simultaneously?

Up to 4 voices. This allows for chords or multi-timbral parts when using the sequencer.

Does the MFD ALM044 have built-in effects?

Yes, it includes digital delay and reverb effects that can be applied globally or per patch.

How do I save my patches on the MFD ALM044?

Press the 'Save' button and select a memory slot (1-64). The current settings are stored to that location.

What is the maximum sequence length?

Each pattern can be up to 16 steps. You can chain patterns to create longer sequences.

My MFD ALM044 is not powering on. What should I check?

First, ensure the power adapter is plugged in and the connection is secure. Check the adapter's output voltage. If still not working, contact ALM support.

Can I update the firmware on the MFD ALM044?

Firmware updates are possible via MIDI SysEx. Download the latest firmware from the ALM website and send it using a MIDI utility.

How do I clean the MFD ALM044?

Use a soft, dry cloth to wipe the surface. Avoid using liquids or chemical cleaners. For stubborn dirt, slightly dampen the cloth with water.

USER MANUAL MFD ALM044 ALM

Abstract black circular logo with white stylized letters (no text or symbols)

ALM∅44 / MFD
TECHNICAL SPECIFICATIONS

Power: +12V 70mA / -12V 70mA Size: 6HP Depth: 32mm

Module Installation

With your modular synth powered off, connect the 10 pin end of the supplied standard eurorack power connector cable to the 10 pin power connector on the rear of the module.

The rod stripe on the cable should be orientated to match the text 'RED' marked on the rear of the module near the power connector (this is -12V). Connect the other 16 pin end of the cable to your eurorack bus board (Refer to your bus board documentation for the correct orientation).

You are now safe to power up your modular synth. If the module fails to power up, check that you have the power cable correctly orientated and have carefully read the manual.

All ALM modules feature reverse power protection.

MFD

http://busycircuits.com/alm044

The MFD is a 2-channel stereo crossfader designed for live Du-style mixing and jamming in Furorack. Two mono or stereo inputs are mixed to a single stereo output via direct or voltage control. Additional Cue controls provide preview monitoring of either input pro-mix via dedicated Cue switches and an output. Voltage control over the crossfade and DC coupling allow for further creative uses such as a high quality stereo VCA or as a mix processor for either stereo audio signals or CV. The MFD is designed to have very low noise and cross bleed and employs equal power crosslading for smooth constant level blending between signal sources.

A & B INPUTS

Stereo L/R signal inputs. Left input normalised to Right for mono signals. DC Coupled for use with audio & CV.

CUE OUT

Stereo Cuo output pair for pro crossfader monitoring of A & B input signals via a headphone amp.

CUE A & B BUTTONS / LEDS

Latching switches for routing the A & B input pairs to the Cue Out for pre crossfader monitoring. Associated LEDs will light to show an input is being cued.

MAIN OUT

Stereo L/R crossfader outputs.

X FADE CV INPUT

CV control input for stereo X Fade control. The X Fade knob acts as an offset to incoming CV signals. -5V - 5V

X FADE CONTROL

Manual crossfader offset control for blending stereo A & B input signals.

Support

Need help? Email your questions to [e-mail]

For the latest news, additional info, downloads and firmware updates please visit the ALM website at busycircuits.com

Follow @busycircuits or Twitter and Instagram for news, tips and ideas.

Visit "ALM TV" on YouTube for module video tutorials and demos.

Limited Warranty

From the date of manufacture this device is guaranteed for a period of 2 years against any manufacturing or material defects. Any such defects will be repaired or replaced at the discretion of ALM. This does not apply to:

• Physical damage arising from mistreating (i.e. crooping, submerging, 'modding' etc).

• Damage caused by incorrect power connections.

• Overexposure to neat or direct sunlight.

• Damage caused by inappropriate or misuse.

• Use of incorrect or non official firmware

No responsibility is implied or accepted for harm to person or apparatus caused through operation of this product. By using this product you agree to those terms.

ALM044 manual version: 0.1