HSU-19VQC22 - Air-conditioner HAIER - Free user manual and instructions
Find the device manual for free HSU-19VQC22 HAIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split Air Conditioner |
| Brand | Haier |
| Model | HSU-19VQC22 |
| Cooling Capacity | 19000 BTU/h |
| Heating Capacity | 19000 BTU/h (Heat Pump) |
| Energy Efficiency Ratio (EER) | 12.0 |
| SEER (Seasonal Energy Efficiency Ratio) | 15.0 |
| Power Supply | 220-240V, 50Hz, 1 Phase |
| Indoor Unit Dimensions (W x H x D) | 1000 x 300 x 220 mm |
| Outdoor Unit Dimensions (W x H x D) | 800 x 550 x 300 mm |
| Indoor Unit Weight | 12 kg |
| Outdoor Unit Weight | 35 kg |
| Refrigerant Type | R32 |
| Refrigerant Charge | 1.2 kg |
| Operating Modes | Cool, Heat, Fan, Dehumidify, Auto |
| Fan Speeds | Low, Medium, High, Auto |
| Timer Function | 24-hour programmable timer |
| Filter Type | Washable mesh filter |
| Noise Level (Indoor) | 35 dB (Low) |
| Noise Level (Outdoor) | 55 dB |
| Remote Control | Included (Infrared) |
| Warranty | 1 Year (Parts and Labor) |
| Maintenance | Clean filter every 2 weeks, annual professional service |
Frequently Asked Questions - HSU-19VQC22 HAIER
How do I clean the air filter?
Turn off the unit and unplug it. Open the front panel, remove the filter, and wash it with warm water and mild detergent. Let it dry completely before reinstalling. Do not use the unit without the filter.
The remote control is not working. What should I do?
Check if batteries are inserted correctly and have charge. Ensure there are no obstacles between the remote and the unit. If still not working, try resetting the remote by removing batteries and pressing any button for 10 seconds.
What does error code E1 mean?
Error code E1 indicates a high-pressure fault. This could be due to a blocked outdoor unit, refrigerant issues, or a malfunctioning sensor. Turn off the unit and contact a qualified technician.
What are the minimum clearances required for installation?
Indoor unit: at least 15 cm from ceiling and 10 cm from walls. Outdoor unit: at least 30 cm from walls on all sides, and ensure good ventilation. Refer to the installation manual for exact measurements.
How do I set the timer to turn on/off?
Press the Timer button on the remote. Use the + or - buttons to set the desired time. Press Timer again to confirm. You can set both on and off timers for up to 24 hours.
Can I use the air conditioner in cooling mode during winter?
Yes, but it may not be efficient. The unit is designed to cool when outdoor temperature is above 16°C. For heating, use heat pump mode if available (check your model). Avoid cooling below 0°C.
How do I switch between Celsius and Fahrenheit?
On the remote control, press and hold the Mode and Down Arrow buttons simultaneously for 5 seconds. The display will toggle between °C and °F.
The outdoor unit is leaking water. Is that normal?
During heating mode, the outdoor unit may produce defrost water, which is normal. During cooling, a small amount of condensate is also normal. If water leaks excessively, check the drain hose for blockages.
How often should I schedule professional maintenance?
It is recommended to have a qualified technician service the unit once a year. This includes checking refrigerant levels, cleaning coils, and inspecting electrical components for optimal performance.
What is the recommended temperature for energy saving?
For cooling, set the thermostat between 24-26°C. For heating, set between 20-22°C. Using the fan in auto mode and closing curtains can further improve energy efficiency.
User questions about HSU-19VQC22 HAIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual HSU-19VQC22 - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HSU-19VQC22 by HAIER.