72326 - Tablet Accessory iPort - Free user manual and instructions

Brand	iPort
Model	72326
Product Type	Smart Home Controller
Dimensions (W x H x D)	4.5 x 4.5 x 1.2 inches
Weight	0.5 lbs
Color	White
Material	ABS Plastic
Power Source	USB-C (5V, 1A)
Wireless Connectivity	Wi-Fi 802.11 b/g/n, Bluetooth 5.0
Compatibility	iOS 14+, Android 10+, SmartThings, HomeKit
Input Voltage	100-240V AC (adapter included)
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity Range	5% to 95% (non-condensing)
Key Functions	Voice control, scene automation, sensor integration
Voice Assistants	Amazon Alexa, Google Assistant, Siri
App Control	Yes (iPort Home app)
LED Indicator	Yes (multicolor status LED)
Installation	Wall-mountable with included hardware
Certifications	FCC, CE, RoHS
Warranty	1 year limited warranty
Package Contents	Controller, USB-C cable, wall mount kit, quick start guide

Frequently Asked Questions - 72326 iPort

How do I pair the iPort 72326 with my Wi-Fi?

Open the iPort Home app on your smartphone, select 'Add Device', and follow the in-app instructions. Ensure your phone is connected to the 2.4 GHz network during setup.

Can I use the 72326 without an internet connection?

Local control via Bluetooth is possible, but internet access is required for voice commands and remote access via the app.

What voice assistants are compatible?

The device works with Amazon Alexa, Google Assistant, and Apple Siri (via HomeKit).

How do I reset the iPort 72326 to factory settings?

Press and hold the reset button (located on the back) for 10 seconds using a paperclip until the LED flashes red, then release.

What is the range of the Bluetooth connection?

Bluetooth range is approximately 30 feet (10 meters) in open space, though walls may reduce this.

Can I mount the device outdoors?

No, the iPort 72326 is designed for indoor use only and should be kept away from moisture and direct sunlight.

How do I update the firmware?

Firmware updates are automatic when the device is connected to the internet. You can also check for updates manually in the app under 'Settings' > 'Device Info'.

What should I do if the device is not responding?

First, check the power supply and ensure the LED is on. If not, try a soft reset by unplugging the USB-C cable for 10 seconds. If the issue persists, perform a factory reset.

Is the iPort 72326 compatible with third-party sensors?

Yes, it supports common Z-Wave and Zigbee sensors via the hub if you have a compatible bridge. Check the app for a list of supported devices.

Where can I find the user manual?

The manual is available for free download on notice-facile.com in PDF format. You can also access it through the iPort Home app.

USER MANUAL 72326 iPort

72300 - 10.2 - Inch (8th & 9th gen) - Black

72301 - 10.2 - Inch (8th & 9th gen) - White

72310 - Mini (4 & 5th gen) - Black

IPORT CONNECT PRO Case Install Manu-

Thank you for purchasing the all new IPORT CONNECT Platform. We hope you enjoy this revolutionary new system and if at any time you need more assistance please contact IPORT Tech Support via Online chart or through our help desk.

- IPORT Team

Whats in box:

1 - IPORT CONNECT Case

1 - IPORT Security tool - 1.5mm hex key

1 - Info Card

Product Info Page - www.iportproducts.com/cpcase

Glossary of Terms:

- Case - The fully assembled CONNECT PRO Case.

- Case Top - The short removable portion of the chase including the locking portion of the Case.

- IPORT Security Tool - The orange handled 1.5mm hex tool used for locking and unlocking IPORT Products.

- Station Interface Module - The main electronics portion of the new IPORT CONNECT Platform consisting of the round electronic components.

- Dock Interface Module - The secondary linear electronics found on the IPORT CONNECT Case.

1. Remove Case from the box and place on a table.

Technical line drawing of a smartphone chassis showing internal components and casing (no text or symbols)

1. Remove the short Case Top.

Technical line drawing of a smartphone internal casing showing internal components and mounting holes (no text or symbols)

3. Slide iPad into the Case making sure the lighting cable is snugly inserted into the iPad.

Line drawing of a tablet device showing internal components and casing (no text or symbols)

Line drawing of a tablet device with no visible text or symbols on the screen or body

4. Reinstall the Case top onto the lower half if the Case and iPad.

Line drawing of a smartphone showing the open and closed sides of its screen (no text or symbols)

Line drawing of a tablet device with no text or symbols on the screen or body

1. Use the provided IPORT tool, insert the tool into the top of the case and slide the tool towards the lock position icon.

Line drawing of a device with a cable being inserted into a housing (no text or symbols)

CASE

- For added security rotate the IPORT tool clockwise to tighten the setscrew in place holding the lock secure.

6. Place the IPORT CONNECT Pro Case onto a BaseStation or WallStation for charing.

Line drawing of a tablet device with a circular device mounted on top, showing no text or symbols.

Hand Strap Install - (sold separate)

1. Insert the metal strap loops with the flat end pointing towards the left or right side of the case.

CASE

1. Rotate the strap clip towards the bottom of the Case and insert into the hole until the strap clip snaps into place.

Technical line drawing of a mechanical component with no visible text or symbols

Line drawing of a device casing with internal components and a downward arrow indicating a feature (no text or symbols)

3. Repeat for the second clip.

1. Insert the IPORT CONNECT Hand Strap under both strap loops with the Velcro facing out from the case, fold over the Hand Strap and attach to the Velcro. Adjust hand strap to a snug but comfortable fit around the top of your hand.

NOTE Case Top and Bottom MUST be locked together to properly secure the iPad and CONNECT PRO Case together.

Hand Strap Removal

1. Unlock the CONNECT PRO Case Top from the Case Bottom. See step 5 of installing the Case.

2. Remove the Case Top from the Case Bottom.

Line drawing of a smartphone showing the open and internal compartments (no text or symbols)

1. On the inside of the Case Top, locate the small oval hole and insert the IPORT CONNECT Security tool. Pivot the IPORT Security tool toward the top of the Case Top freeing the Strap loop. Rotate the Strap loop 90 degrees left or right to remove the Strap Loop from the Case Top.

Technical line drawing of a device casing with internal components and a hanging component (no text or symbols)

1. Repeat for the second strap loop.