SurgeArrest Essential P3U3B - Surge protector APC - Free user manual and instructions

Product Type	Surge Protector
Model Number	SurgeArrest Essential P3U3B
Number of AC Outlets	3
Number of USB Ports	2 (USB-A, 5V/2.4A total)
Input Voltage	120 V AC
Maximum Current	15 A
Surge Energy Rating	1080 Joules
Clamping Voltage	400 V (L-N)
EMI/RFI Filtering	Yes
LED Indicator	Protected and Grounded LEDs
Power Cord Length	0.9 m (3 ft)
Dimensions (W x D x H)	7.6 x 3.8 x 3.0 cm (3.0 x 1.5 x 1.2 in)
Weight	0.23 kg (0.5 lb)
Warranty	3 years limited
Safety Certifications	UL 1449, cUL
Maximum Spike Current	6.5 kA (per mode)
Operating Temperature	0°C to 40°C
Cleaning	Wipe with a dry, lint-free cloth
Repairability	Non-serviceable; replace if damaged

Frequently Asked Questions - SurgeArrest Essential P3U3B APC

What kind of devices can I plug into the SurgeArrest Essential P3U3B?

You can safely plug computers, monitors, printers, routers, and other home electronics drawing up to 15 A total.

How do I know if the surge protection is working?

The Protected LED should be lit. If it is off or red, surge protection may be compromised and the unit should be replaced.

Can I use this surge protector for outdoor applications?

No, the SurgeArrest Essential P3U3B is designed for indoor use only. Keep it away from moisture.

What is the USB charging output?

The two USB ports provide a combined output of 5V/2.4A, suitable for charging smartphones, tablets, and other USB devices.

Does the surge protector have a resettable circuit breaker?

Yes, it includes a resettable circuit breaker to protect against overloads.

How often should I replace my surge protector?

Replace it after a major surge event or if the Protected LED is no longer lit. Generally, every 3-5 years is recommended.

Can I mount this surge protector on a wall?

The P3U3B has keyhole slots on the back for wall mounting, but ensure the cord is not strained.

What is the warranty on this product?

APC offers a 3-year limited warranty and a connected equipment warranty of up to $75,000 (subject to terms).

Is the surge protector compatible with a power strip?

It is recommended to plug the surge protector directly into a wall outlet. Do not daisy-chain multiple surge protectors.

What should I do if the USB ports stop working?

Check if the Protected LED is on. If yes, try resetting the unit by unplugging it for 30 seconds. If still not working, contact APC support.

USER MANUAL SurgeArrest Essential P3U3B APC

Safety and General Information

- For indoor use only. Internal components are not sealed from the environment.

- Do not install the SurgeArrest where there is excessive heat or humidity.

• Do not plug extension cords into the SurgeArrest.
• Plug the unit into a 3 wire, 120 volt, grounded outlet. Verify the safety of the building wiring prior to connecting the unit to a wall outlet.
• Never install electrical wiring during a lightning storm.

CAUTION: To reduce the risk of electrical shock, inspect the premises carefully. Do not use the unit if a proper equipment ground cannot be verified.

- This device will disconnect the surge protective component at the end of its useful life. It will not continue to supply power to connected equipment.

Indicators

Protection Working - The LED is normally illuminated indicating that the surge protector is on and ready to protect connected equipment. If the LED is not illuminated the surge suppression circuitry has been compromised. Contact APC by Schneider Electric using the contact information provided in this guide.

Ground OK - The LED is normally illuminated indicating that the building wiring is grounded properly. The LED extinguishes to indicate that a wiring fault has been detected. Possible wiring faults include a missing ground, a hot neutral polarity reversal, or an overloaded neutral circuit. Discontinue use and have a qualified electrician correct the building wiring.

Specifications

Nominal Operating Voltage	120 Vac, 60 Hz
Maximum Amperage 12 A
USB Charge Port 3 ports, 5V 2.1A
Joule Rating 1080 Joules
Cord Length 6 ft (1.86 m)
Dimensions Height x Width x Depth	5.1 in x 5.0 in x 1.5 in (13 cm x 12.8 cm x 3.8 cm)

Limited Warranty

Schneider Electric IT (SEIT) warrants its products to be free from defects in materials and workmanship under normal use and service for the lifetime of the original purchaser. Its obligation under this warranty is limited to repairing or replacing, at its sole option, any such defective products. To obtain service under warranty you must obtain a Returned Material Authorization (RMA) number from SEIT or a SEIT Service Center with transportation charges prepaid and must be accompanied by a brief description of the problem and proof of date and place of purchase. This warranty applies only to the original purchaser.

Schneider Electric IT Customer Support Worldwide: For country specific customer support, go to the APC by Schneider Electric Web site, www.apc.com.