LW-N1860HI - Air-conditioner LG - Free user manual and instructions
Find the device manual for free LW-N1860HI LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Window Air Conditioner |
| Model | LW-N1860HI |
| Brand | LG |
| Cooling Capacity (BTU/h) | 18,000 |
| Energy Efficiency Ratio (EER) | 11.2 |
| Power Supply | 230V / 60Hz |
| Power Consumption (Cooling) | 1600 W |
| Airflow (CFM) | 450 |
| Dimensions (W x H x D) | 26 x 19 x 28 inches |
| Weight | 95 lbs |
| Refrigerant Type | R410A |
| Operating Modes | Cool, Fan, Dry |
| Fan Speeds | 3 (High, Medium, Low) |
| Thermostat Control | Electronic with Remote Control |
| Filter Type | Washable, Reusable |
| Filter Cleaning | Every 2 weeks |
| Timer | 24-hour On/Off |
| Remote Control | Yes, included |
| Safety Features | Overload Protection, Auto Restart |
| Installation Type | Window Mounted |
| Warranty | 1 Year Parts and Labor |
Frequently Asked Questions - LW-N1860HI LG
How often should I clean the air filter?
The air filter should be cleaned every 2 weeks during peak usage. Remove the filter by pulling it out from the front panel, wash with mild detergent and water, dry completely before reinstalling. A clogged filter reduces efficiency.
Why is my air conditioner not cooling properly?
Check if the filter is dirty, ensure the thermostat is set below room temperature, verify the unit is in cool mode, and make sure windows/doors are closed. If the problem persists, the refrigerant may be low – contact a professional.
Can I use an extension cord with this unit?
No. This air conditioner requires a dedicated power outlet. Do not use an extension cord or power strip; it can cause voltage drop, overheating, or fire hazard. Plug directly into a properly grounded 230V outlet.
How do I set the timer?
Press the Timer button on the remote control. Use the +/- buttons to set the desired on or off time (in 1-hour increments up to 24 hours). Press Timer again to confirm. The unit will automatically turn on/off at the set time.
What does the 'Auto Clean' function do?
The Auto Clean function dries the evaporator coil after the unit is turned off to prevent mold and mildew growth. To activate, press the Auto Clean button on the remote; the fan will run for about 10 minutes after shut down.
How do I switch between Celsius and Fahrenheit?
With the unit on and in cool mode, press and hold the Temp Up and Down buttons simultaneously for 5 seconds. The display will toggle between °C and °F. The remote control also has a similar function.
What is the recommended temperature setting for energy savings?
For optimal energy efficiency, set the thermostat to 78°F (26°C) while you are at home and raise it when away. Each degree above 78°F can save up to 3% on cooling costs.
Can I install the air conditioner in a sliding window?
Yes, but you may need an additional kit or adapter. The unit is designed for double-hung windows. For sliding or casement windows, consult the installation manual for specific hardware requirements.
How do I reset the filter indicator light?
After cleaning the filter, press and hold the Filter Reset button on the control panel for 3 seconds until the indicator light turns off. This resets the timer for the next cleaning cycle.
Where can I find replacement parts or service?
For genuine LG replacement parts, contact an authorized LG service center. You can find the nearest center by visiting LG's website or calling their customer service. Keep your model number (LW-N1860HI) ready.
User questions about LW-N1860HI LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual LW-N1860HI - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LW-N1860HI by LG.