Pure Vision 850 - Heating Real Flame - Free user manual and instructions
Find the device manual for free Pure Vision 850 Real Flame in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Fireplace Heater |
| Model | Pure Vision 850 |
| Brand | Real Flame |
| Heating Power | 1500 W (5000 BTU/h) |
| Voltage | 120 V ~ 60 Hz |
| Dimensions (W x H x D) | 31.5 x 20.5 x 11.8 in (80 x 52 x 30 cm) |
| Weight | 42 lb (19 kg) |
| Heating Coverage | Up to 400 sq ft (37 m²) |
| Flame Effect Type | LED with 3 brightness levels |
| Remote Control | Included (battery operated) |
| Thermostat | Adjustable, 60-82°F (16-28°C) |
| Safety Features | Overheat protection, tip-over auto shut-off |
| Installation Type | Freestanding (no venting required) |
| Material | Steel body with tempered glass front |
| Heat Settings | Low (750 W) and High (1500 W) |
| Flame Only Mode | Yes (no heat for year-round use) |
| Remote Control Range | 20 ft (6 m) |
| Maintenance | Clean glass with non-abrasive cleaner; dust heater vents monthly |
| Replaceable Parts | Heating element, fan motor, remote control, power cord |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - Pure Vision 850 Real Flame
How do I install the Real Flame Pure Vision 850?
Place the heater on a flat, stable surface at least 3 ft away from furniture or curtains. Plug into a grounded outlet. No venting is required.
Can I use the flame effect without heat?
Yes, press the Flame button on the remote or unit to activate the flame effect independently of the heater. This allows year-round ambiance.
How do I clean the glass front?
Use a soft, non-abrasive cloth with mild glass cleaner. Avoid harsh chemicals. Ensure the unit is cool and unplugged before cleaning.
What does the tip-over safety switch do?
The heater automatically shuts off if it is tipped over, preventing fire hazards. To reset, place it upright and turn it on again.
How do I adjust the thermostat?
Use the Thermostat control button on the unit or remote. Set the desired temperature (60-82°F). The heater will cycle on/off to maintain it.
Why is the heater not blowing hot air?
Check the heater mode (should not be on flame-only). Also ensure the thermostat is set above room temperature. If still cold, the heating element may need replacement.
Can I mount this fireplace on a wall?
No, the Pure Vision 850 is designed for freestanding use only. Do not attempt to wall-mount as it may cause instability.
How do I replace the remote control batteries?
Slide open the battery compartment on the back of the remote. Replace with two AAA batteries (not included). Ensure correct polarity.
Is the heater energy-efficient?
Yes, it uses fan-forced convection to heat rooms efficiently. The flame mode uses very little electricity (LED). It is not intended as a primary heat source but as a supplement.
What should I do if the unit smells like burning plastic?
On first use, a slight odor is normal as internal components cure. Ensure good ventilation. If smell persists, turn off and contact customer support.
User questions about Pure Vision 850 Real Flame
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual Pure Vision 850 - Real Flame and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Pure Vision 850 by Real Flame.