Simplicity - Heating Real Flame - Free user manual and instructions
Find the device manual for free Simplicity Real Flame in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Fireplace Heater |
| Brand | Real Flame |
| Model | Simplicity |
| Dimensions (W x H x D) | 20 in x 15 in x 10 in (51 cm x 38 cm x 25 cm) |
| Weight | 15 lbs (6.8 kg) |
| Power Source | 120 V AC, 60 Hz |
| Power Consumption | 1500 W (max) |
| Heating Area | Up to 400 sq ft (37 sq m) |
| Heat Settings | Low (750 W) and High (1500 W) |
| Flame Effect | Yes, with adjustable brightness |
| Thermostat | Adjustable, with auto shut-off |
| Remote Control | Included |
| Safety Features | Overheat protection, cool-touch glass, tip-over switch |
| Installation | Freestanding, no venting required |
| Maintenance | Clean glass with soft cloth; replace flame bulbs every 2-3 years |
| Replacement Parts | Flame bulbs, remote control, heating element |
| Repairability | User-replaceable bulbs and heating element |
| Certifications | UL listed, ETL certified |
Frequently Asked Questions - Simplicity Real Flame
How do I turn on the Simplicity heater?
Plug the heater into a standard 120 V outlet. Use the power button on the unit or the remote control to turn it on. The flame effect and heater can be controlled separately.
Can I use the flame effect without the heater?
Yes, you can operate the flame effect independently without the heater. Use the control panel or remote to activate the flame only.
How do I clean the glass front?
Allow the heater to cool completely. Use a soft, dry cloth to wipe the glass. For stubborn smudges, dampen the cloth with water and a gentle glass cleaner. Do not use abrasive cleaners.
What should I do if the heater stops working?
First, check if the unit is plugged in and the outlet is working. If the overheat protection has activated, turn off the heater, unplug it, and let it cool for at least 30 minutes before restarting. If the issue persists, contact customer support.
Does the heater require professional installation?
No, the Simplicity heater is freestanding and does not require venting or professional installation. Simply place it on a flat, stable surface away from flammable materials.
What is the maximum heating area?
The heater can effectively heat a room up to 400 square feet (37 square meters). Results may vary depending on insulation and ceiling height.
How do I replace the flame bulbs?
Unplug the heater. Remove the screws on the back panel to access the bulb housing. Wear gloves to handle the new bulbs (C7 type, 7W). Install new bulbs and reassemble.
Is the heater safe to use around children and pets?
Yes, the heater has a cool-touch glass exterior and a tip-over switch that automatically shuts it off if knocked over. However, always supervise children and pets around the unit.
Can I use an extension cord?
It is recommended to plug the heater directly into a wall outlet. If you must use an extension cord, use a heavy-duty cord rated for at least 15 amps and as short as possible.
How do I reset the thermostat?
If the heater shuts off prematurely, the thermostat may need to be adjusted. Turn the thermostat dial to a higher setting. If it still does not operate, let the unit cool and then restart.
User questions about Simplicity Real Flame
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual Simplicity - Real Flame and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Simplicity by Real Flame.
USER MANUAL Simplicity Real Flame
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Real Flame
Model : Simplicity
Category : Heating