STAV24 S2 - Uncategorized BOWERS & WILKINS - Free user manual and instructions
Find the device manual for free STAV24 S2 BOWERS & WILKINS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Bowers & Wilkins |
| Model | STAV24 S2 |
| Driver Size | 10 inches (24 cm) |
| Frequency Response | 20 Hz - 200 Hz |
| Amplifier Power | 500 W RMS |
| Dimensions (H x W x D) | 19.7 x 11.8 x 15.7 inches (500 x 300 x 400 mm) |
| Weight | 44 lbs (20 kg) |
| Enclosure Type | Ported |
| Inputs | Line Level (RCA), LFE (RCA) |
| Controls | Volume, Crossover (50-200 Hz), Phase (0/180°) |
| Auto Power | Yes, with signal detection |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Color | Black |
| Included Accessories | Power cord, user manual |
| Safety Features | Thermal protection, short circuit protection |
| Maintenance | Clean with a dry, soft cloth |
| Repairability | Serviceable by authorized technicians |
Frequently Asked Questions - STAV24 S2 BOWERS & WILKINS
What is the recommended placement for the STAV24 S2 subwoofer?
Place the subwoofer in a corner or along a wall to maximize bass output. Avoid placing it too close to walls to prevent boomy sound. For best results, experiment with placement and use the phase control to integrate with your main speakers.
How do I connect the subwoofer to my receiver?
Use a single RCA cable from the subwoofer output of your receiver to the LFE input on the subwoofer. Alternatively, use line-level inputs if your receiver has pre-outs for front speakers. Ensure the subwoofer's crossover is set to bypass or at the highest setting if using receiver bass management.
Why is my subwoofer not turning on?
Check the power cord connection, ensure the power switch is on, and verify that the auto-on feature is enabled. If the subwoofer does not detect a signal, it may remain in standby. Try playing audio at a moderate level. If still off, check the fuse or contact support.
What is the correct crossover setting?
Set the crossover frequency to match your main speakers' low-frequency capability. Typically, set it between 80 Hz and 120 Hz. If your receiver handles bass management, set the subwoofer's crossover to the highest (200 Hz) or bypass.
How do I adjust the phase control?
The phase control (0° or 180°) aligns the subwoofer's output with the main speakers. Play a bass-heavy track and toggle between settings. Choose the position that provides tighter, more integrated bass. Usually 0° is default.
What is the frequency response of the STAV24 S2?
The subwoofer has a frequency response of 20 Hz to 200 Hz, allowing it to reproduce deep bass notes accurately.
Can I use the subwoofer with a stereo amplifier?
Yes, if your stereo amplifier has pre-outs (line-level outputs). Connect them to the subwoofer's line-level inputs. If no pre-outs, you can use a high-level input (speaker wire) adapter (not included).
How do I clean the subwoofer?
Use a soft, dry cloth to wipe the exterior. Do not use liquids or abrasive cleaners. Avoid getting dust into the port or driver area.
What are the dimensions and weight?
The subwoofer measures approximately 19.7 x 11.8 x 15.7 inches (HxWxD) and weighs about 44 lbs (20 kg). Ensure your shelf or floor can support its weight.
Is the subwoofer repairable?
Yes, but only by authorized Bowers & Wilkins technicians. Do not attempt to open the cabinet yourself, as it contains high-voltage components. Contact customer support for service.
User questions about STAV24 S2 BOWERS & WILKINS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual STAV24 S2 - BOWERS & WILKINS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. STAV24 S2 by BOWERS & WILKINS.