AVBP2 - Pregnant Fluance - Free user manual and instructions
Find the device manual for free AVBP2 Fluance in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Speaker |
| Brand | Fluance |
| Model | AVBP2 |
| Speaker Type | Passive 2-Way |
| Power Handling (RMS) | 100 Watts |
| Impedance | 8 Ohms |
| Sensitivity | 90 dB |
| Frequency Response | 50 Hz - 20 kHz |
| Dimensions (W x H x D) | 7.5 x 12.5 x 9.5 inches |
| Weight (each) | 10 lbs |
| Enclosure Material | MDF (Medium Density Fiberboard) |
| Finish | Black Wood Grain |
| Tweeter | 1 inch Silk Dome |
| Woofer | 5.25 inch |
| Crossover | 2-Way |
| Grille | Removable Magnetic |
| Inputs | Binding Posts |
| Included Accessories | User Manual |
| Cleaning Instructions | Wipe with a soft, dry cloth |
| Safety Precautions | Do not expose to water or moisture |
| Repairability | Replacement drivers available |
Frequently Asked Questions - AVBP2 Fluance
How do I connect the AVBP2 speakers to my amplifier?
Use speaker wire with bare ends or banana plugs. Connect the positive terminal (+/red) of the speaker to the positive output of your amplifier, and the negative terminal (-/black) to the negative output. Ensure a secure connection at the binding posts.
What amplifier power is recommended for the AVBP2?
An amplifier with 20-100 Watts RMS per channel is recommended. The AVBP2 has a power handling of 100 Watts RMS, so avoid overpowering to prevent damage.
Can I use these speakers for a home theater system?
Yes, the AVBP2 can be used as front, surround, or rear speakers in a home theater setup. They pair well with a subwoofer for full-range sound.
What is the impedance of the AVBP2?
The impedance is 8 Ohms, which is standard for most home audio receivers and amplifiers.
Are the AVBP2 speakers magnetically shielded?
No, these speakers are not magnetically shielded. Keep them at least 12 inches away from CRT televisions or sensitive magnetic equipment.
How should I clean the AVBP2 speakers?
Use a soft, dry microfiber cloth to gently wipe the cabinet. Do not use any solvents, abrasive cleaners, or water. The grille can be removed and lightly dusted.
What warranty does Fluance provide for the AVBP2?
Fluance typically offers a limited lifetime warranty on their speakers. Check your specific documentation or contact Fluance for details.
Can I mount the AVBP2 speakers on a wall?
These speakers are not designed for wall mounting. They are intended for bookshelf or stand placement. For wall mounting, consider using a separate wall-mount bracket compatible with the size and weight.
What is the frequency response of the AVBP2?
The frequency response is 50 Hz to 20 kHz, providing clear mids and highs with moderate bass extension.
Are the AVBP2 speakers compatible with my receiver?
If your receiver has speaker outputs and can drive 8 Ohm loads, the AVBP2 is compatible. Check your receiver's power rating to ensure it matches the 20-100 Watt range.
User questions about AVBP2 Fluance
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual AVBP2 - Fluance and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AVBP2 by Fluance.
