XL7F - Loudspeaker Fluance - Free user manual and instructions
Find the device manual for free XL7F Fluance in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Floor-standing loudspeaker |
| Enclosure Type | Bass reflex (ported) |
| Frequency Response | 40 Hz - 20 kHz |
| Sensitivity | 88 dB (2.83V/1m) |
| Impedance | 8 Ohms (nominal) |
| Power Handling (RMS) | 150 Watts |
| Peak Power Handling | 300 Watts |
| Tweeter | 1-inch silk dome |
| Midrange/Woofer | Two 6.5-inch woven glass fiber |
| Crossover Frequency | 2.5 kHz |
| Dimensions (H x W x D) | 38.0 x 8.0 x 12.0 inches |
| Weight | 45.0 lbs each |
| Finish | Black Ash or Walnut |
| Grille | Magnetic, detachable |
| Binding Posts | 5-way gold-plated, bi-wire capable |
| Recommended Amplifier Power | 20 - 200 Watts per channel |
| Placement | Away from walls, upright on floor |
| Cleaning Instructions | Dust with a soft dry cloth; avoid liquids and abrasive cleaners |
| Safety Precautions | Place on a stable surface, avoid moisture, keep away from heat sources |
| Spare Parts & Repair | Contact Fluance customer service for authorized replacement parts |
Frequently Asked Questions - XL7F Fluance
How should I position the Fluance XL7F speakers?
Place the speakers at least 2 feet from walls for optimal bass response. The tweeters should be at ear level when seated. Ensure they are on a solid, level surface.
Can I bi-wire or bi-amp the XL7F?
Yes, the binding posts are designed for bi-wiring or bi-amping. Remove the jumper straps and connect separate speaker wire runs for the tweeter and woofer sections if using two amplifiers.
What is the recommended amplifier power for these speakers?
Amp power between 20 and 200 watts per channel is recommended. They are efficient at 88 dB sensitivity, so even modest amplifiers can drive them well.
How do I clean the Fluance XL7F?
Dust the cabinet with a soft, dry microfiber cloth. For the grille, gently vacuum using a brush attachment. Never use wet cloths or cleaning chemicals.
Is there a break-in period for the speakers?
Yes, allow 20-30 hours of playback at moderate volume for the drivers to reach optimal performance. During this time, the sound may improve in clarity and bass response.
Can I place the speakers on their side?
No, the XL7F is designed to be used upright. Placing on its side may compromise soundstage and imaging, and the port tuning may be affected.
What type of speaker wire should I use?
Use 14-16 gauge speaker wire for runs up to 50 feet. Larger gauge (12) for longer distances. Ensure clean connections at the binding posts.
Do the speakers come with a warranty?
Yes, Fluance provides a limited lifetime warranty for the original owner. Register your product online to activate coverage.
How do I obtain spare parts or service?
Contact Fluance customer support via their website or phone. They can assist with replacement drivers, crossovers, or other components if needed.
Are the speakers magnetically shielded?
No, the XL7F is not magnetically shielded. Keep them at least 2 feet away from CRT televisions or other magnetic sensitive devices to avoid color distortion.
User questions about XL7F Fluance
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual XL7F - Fluance and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XL7F by Fluance.
USER MANUAL XL7F Fluance
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fluance
Model : XL7F
Category : Loudspeaker