MHT860 - Loudspeaker MAGNAVOX - Free user manual and instructions

Product Type	Home Theater Speaker
Model	MHT860
Brand	Magnavox
Dimensions (W x H x D)	8.5 x 12 x 6.5 inches
Weight	5.5 lbs
Power Output (RMS)	50W
Frequency Response	50 Hz - 20 kHz
Impedance	8 ohms
Driver Configuration	1 tweeter, 1 woofer
Enclosure Type	Bass reflex with front port
Connectivity	Bluetooth, AUX 3.5mm, USB
Inputs	RCA, Optical
Accessories	Remote control, power cable, user manual
Power Supply	AC 120V, 60Hz
Mounting Options	Bookshelf or stand mount
Finish	Black wood grain veneer
Clean & Care	Wipe with dry soft cloth; do not use chemicals
Safety	Class II double insulated; ensure ventilation
Spare Parts	Contact Magnavox support for replacement drivers

Frequently Asked Questions - MHT860 MAGNAVOX

How do I connect my Magnavox MHT860 speaker via Bluetooth?

Ensure the speaker is powered on. Press the Bluetooth button on the remote or speaker. On your device, scan for 'Magnavox MHT860' and select it. The speaker will indicate successful pairing with a tone.

What is the recommended placement for the MHT860 speaker?

Place the speaker on a sturdy, flat surface at ear level. Avoid corners or enclosures that may distort the bass. Keep at least 6 inches of clearance from walls for optimal airflow and sound projection.

Can I use the MHT860 with a TV?

Yes, connect via the optical or aux input on the speaker to the corresponding output on your TV. For wireless use, if your TV supports Bluetooth, pair it as you would a phone.

How do I clean the MHT860 speaker?

Unplug the speaker. Use a soft, dry lint-free cloth to gently wipe the exterior. For grille dust, use a vacuum with a soft brush attachment. Do not use any liquid cleaners or abrasive materials.

What should I do if the speaker has no sound?

Check that the speaker is powered on and the volume is turned up. Verify the source device is playing and connected properly. Try a different input cable or device. If using Bluetooth, ensure the device is paired and within range.

Can I connect multiple MHT860 speakers together?

No, the MHT860 does not support multi-room or daisy-chaining. Each speaker must be connected individually to its own audio source.

What is the power consumption of the MHT860?

The speaker has a maximum power consumption of 60W. It operates on standard AC 120V, 60Hz supply. For energy saving, turn off the speaker when not in use.

How do I reset the MHT860 to factory settings?

With the speaker powered on, press and hold the Volume Down and Bluetooth buttons simultaneously for 5 seconds. The speaker will restart and all paired devices will be cleared.

What type of warranty covers the MHT860?

Magnavox offers a 1-year limited warranty for the MHT860. It covers manufacturing defects and malfunctions under normal use. Proof of purchase is required.

My remote control isn't working. What can I do?

Replace the batteries (CR2025) if the remote is unresponsive. Ensure there is a clear line of sight to the speaker’s IR sensor, within 20 feet. If problems persist, try resetting the speaker.

USER MANUAL MHT860 MAGNAVOX

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

[Non-Text]

PORTABLE

SPEAKER SYSTEM

with Bluetooth® Wireless Technology

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated text (underscores) where none should exist. Hence, the result is inconsistent with the Ground Truth.

[Non-Text]

[Non-Text]

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

OWNER'S MANUAL

2017年1月1日

[Non-Text]

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

[Non-Text]

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

m = 311

m = 311

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

PLEASE READ BEFORE OPENING THE EQUIPMENT.

(1) 陈伟, 陈伟

MODEL: MHT850

FCC NOTICE: This amendment

This equipment has been tested and limited to accept with the limits for a Class B-digital device, pursuant to Part 15 of the SFX Palor. These limits are desired to provide

the TCC holds. These kinds of groups to private reasonable protection against harmful interference in a

residential installation. This equipment generates, loses and can radiate radio frequency energy and, if net installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantve that interference will not occur in a particular installation. If this occasion does cases harmful interfere:

once to radio or television reception, which can be determined by turning the environment off and so, the rear is

incorporated by mining and equipment for sale, the author is encouraged to try to contact the interference by one or more of the following response:

(1) Plan a list of options

■ Business of resolvate the meeting agenda. ■ Increase the separation between the equipment and

■ Connect the equipment into an outlet on a circuit.

different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV

technician for help.

FC STATEMENT

1. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following per-implification: (1) This device may not cause harmful interference, and (2) This device must prevent interference received.

(2) This device must accept any interference effects, including interference that may cause undesired

operation. 2. Changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate the equipment.

ECC WARNING:

To aware continued operation, follow the attached installation instructions and use only shield rights when

Internal issues and use only wireless/rather when connecting to other devices. Changes or modifications not

expressly approved by the party representatives for compliance could void the user's authority to operate the

equipment.

[Non-Text]

[Non-Text]

[Non-Text]

LOCATION OF CONTROLS

1. LED Display

2. Bright On/OFF/On/Off

3. Pilsen für den Vorder Central Kreb

4. ■ Bolton

5. ■ Bolton

6. ■ Button

7. MODE Button

8. REF: ● (Repeat/Decorative LED Lights On-Off-Bution

9. EQ (Equalizer) Button

10. MIC (Microscope Input) Jack

11. DC 5V (Micro USB) Port (Ex charging cells)

12. TIF (Micro-SD) Card Slot

13. Total Port

14. Red Charge Indicator

15. UNF (0/15% RS-US)

16. LINE IN (RSX IN) 286x

FORMAN SOURCE: This will have a livell in Live fashionable history, where it

The first time has a delay. Upon non-continuous battery, change it before the time use or when it is dried as follows:

Cable to the DC 5V (Micro USB) Port on the front of unit.

1. Connected the full size USD Plug from the supplied Uber Connection Cable to the USB Port on the Personal

Computer or USB Charger (Computer and USB Charger not included).

① 118*107

To Computer or any T3 (B) 5V

(MoR/2008) Put

1. When charging, the Red Charging Indicator on the front of

Unit and Utilities: Within charging is complete, a well are off.

1. When thereg, you can also play and playing music at I'm same time.

Notes: Your better will last longer if you're following these simple

guidelines for caring and storing: A. Before first time use, recharge the unit assoxvirate (i

hours until the unit is fully charged.

1. Charge and snow line until the temperature range of 5°C\~35° (185°F\~95°F).

C. Do not overcharge (longer than 24 hours). Excessive charging or nursing the unit until battery fully drains will

1

damage battery. Battery life will be extended if you keep

the battery roll charges. Battery life naturally shortens slowly over time.

1. The rechargeable battery incorporated in this product is not user replaceable.

OPERATION:

General Operations

. Recharge the built-in LHON battery as previously instructed.

T. Ture the Power On-Off/Volume Control Keob clearwise to power on the unit and set the volume level as desired.

The Blue LED lights inside the knob will illuminate. Press the MOPF Button sequentially is strictly to disrael

playback mode. The unit will display with your selection (see Delbrue):

(360 mm, 2600m).
Playback Mode: Showing an Display

(01) (Shinbock) "TAUB" will appear on the display and indicate

IFM Rustin Indisaton 'F01' on the display and Burrisale

and trade frequency will appear on the display Line in "LINE" will appear on the display

(词典) "USI" will appear on the display and indicator "USII" on the display will illustrate music in

the LUSB Devio will start playbank automatically TB (800x) NOL Cavi "54" will answer on the display and indicators

'USD' on the display will be instrumental; music in the card will start quickly automatically

Date

If the TF (Million 3D) Card or USB Device had NOT been inserted into the unit, the correspondence

selection will not available.

1. During playback:

- Tang the Power On-CtrlVolume Control Korea to adjust volume level as desired.

- Press the EQU (Liquidizer) button repeatedly to activate and set the sound effect mode as desired as below:

Display shows: Select Effect.

vOC Rock POP Pop music

CLA MA2 Classifc

CUI Country

NOx Normal

Note: EU is not available in Line in Mode.

346

1. Press and hold the REP/Button to turn off the

Diodevive LED Lights, press-and-hall again to turn it off 6. When finated listening, turn the Power On-Off/Volume

Control knob counterlockwise until "Click" sound is heard to shut off the unit. The blue lights inside the knob

will not illuminate.

OT Mode:

aT (bluesbott) painting: First time use or re-pairing the unit to a new BT Device, pai

as follows: 1. Power on the unit and enter to BIT mode as previously

instructed. "BLUE" will appear on the display and indicate "BTE" as for design call (demonstrate and label).

1. Power on the external BT Device and enter to BT

search mode, Start ping following the on screen. Instructions from the external BT Device. When period,

the indicator BT on the display will stop blinking. 3. If going is complete you may now play music with your

external BT Device.

1. During playback. • Turn the Power On-Off/Volume Control Knob to adjust volume level as desired.

◆ Press the ≧ Button on the unit to pause, press again to

resume-normal playback. • Prays and release the ■ or ■/■ officers sequentially in

skip tracks. 5. When finished listening, turn the Power Crop-OffSVolume

Control Kweb counterdoctwise until "Cblc" sound is heat

to draw on the unit, that blue lights inside the knee and face illuminate.

Notes: - When the external IT Devine searches for the unit, our

model number "MHT300" will appear on the display of

If while pairing you are asked for a code please try "0000"

Vermi, preadine after addition:

1. Power on the external BT Device and enter to BT

2. Power on the unit and enter to BT mode as previously

instructed. "BLUs" will appear on the display and indicate "BT" on the display will illuminate and blink.

1. Wait a few seconds until the unit is automatically paired to the external BT Device. The indicator BT on the display

will stop blinking. 4. After playing is complete you may now play music with

your external BT Device.

FM Radio:

1. Potter on the unit and enter to radio mode as previously instructed. Indicator "FM" on the display will illuminate

atio radio frequency will appear on the display. 2. In first time use (or relocated the unit to a new location),

search and store the available Fill stations by press the ▶Button. The unit will automatically to search and

store all available FM radio stations then play the 1st. stored FM station. Press the ▼ or ▶ buttons repeatedly

to select and plays the desired stored radio station. 3. During playback, turn the Power On-Off/Volume Control

Knob to adjust volume level as desired. 4. When finished listening, 100% Box Box (On/OFF) volume

Control Kucb counterdockwise until "Click" sound is

Ris\sho) to since on the line, that close agrees inside the knee will not illuminate.

Antevas:

This unit has a built-in FM antenna, which provides adequate reception in most areas. If reception is weak,

reassemble the other direction/location to improve reception

LIST IN (AUX IN):

Listen from an external Audio Player such as MP3 Player,

1. In power off mode, connect one end of the supplied

Audio Connection Cable to the AUX Out/Line Out/Phone Jack on the external Audio Player.

1. Connect the other end of free cables to the LINs IN (ALIX IN), Jack on the Ford of unit, as illustrated below:

1.45 kC - To turn online our

Phone jack on the website auto threat

图 1-3

(2)

TO LIME IN JNK

1. Power on the unit and enter to LINE IN mode as previously instructed. "LINE" will appear on the display.

2. Play the music on the connected Audio Player as usual. (Make sure the volume level of the connected Audio

Player is turned to high level.)

- Turn the Power On-OffVolume Control knob to adjust

volume level as desired. - Press the ■■ Button on the unit to-mute, press again to

turn the sound back.

i. When finished listening, turn the Power On-OffVolume

Control Knoe: 00mmarcsokwba unit "Clock" studio is heard to shut off the unit. The blue lights inside the knob

will for nominal.

To play the music in USB Device:

1. In power off mode, connect the USB Device (not included) into the USB Part on the front of unit as

illustrated below:

[NO TEXT]

^{* a}

▶ 8

1. Power on the drill and order to USB mode as previously instructed;

- "USB" will appear on the display. - Indicator "USB" on the display will illuminate.

- Music in the USB Device will start playback automatically

1. During playback: • Turn the Power On-Off/Volume Control Knob to adjust

Volume level as desired.

- Press the Reduction on the side to packet, great again to resume normal playback.

- Press the 📄or 📋 buttons repeatedly to skip tracks. 1. Repeat playback, during playback:

- Press the HAP? ablation once on the front of unit to activate repeat all functions: "ALL" will appear on the

display and all the tracks on the USB Device will be playback repeatedly until the unit was shut off.

■ Press the REPV ■ Button twice to activate repeat one function. "ONE" will answer on the display from the

Current track will be playback repeatedly until the unit

- Press the REP/ ●Button three times. 'NOr' will press on its display; then its report function call has

appeal on the display then the repeat function will be cancelled.

1. When finished listening, tani the Power On-Uff/Voutina Control Knob causterciodewise until "Click" issued is

heard to shut off the unit. The blue lights inside the knob will not illuminate.

IF (Micro SDI Cars)

To play the music in TF (mfora 3D) Card:

(1) In power in Adobe, I see the TF (Microsoft SQL Card) plus included) info I'm TF (Microsoft SD) Card Slot on the first of all with contacts since us as Financial bilins.

Of all, we'll conclude along up as interested in them.

A

10

ve unit and enter to TF (i

Previously instructed: appear on the display.

(SO) on the display will be TE (Micro SD) Card

fully.

Power On-Off/Volume C

- evaluation on the unit to

normal playback. or Buttons repeat

back, during playback: REPI ● Button once an

peat: all function. 'ALL' and the all the itacks on #

ck repeatedly until the a SEF1 ▲ Button twice to

ONE" will appear on the

ex de profonde n.p.

(FLP) button three times the display then the req

ed listening, turn the Pu

to counterblackcase and of off the unit. The Blue

institute.

TE/Mex TD/Cas/II

TF (Micro SD) (dorsizing the TF (Micro SD) C)

to avoid damaging the

device of the unit. If it is do direction is correct.

cing TF (Hillors 50) Can has been powered off.

ed to download the deal he TF (Bilbara 2021) Goto29

e unit.

8

TROUBLESHOOTING:

Check the following before requesting seminor: SOWEDON POSSIBLE VALUE POWER SOLUTION

STAMP FOR FOODIBLE CREAM 1980/07/2013

Car's posum on: 18-40 min/30 p#d##s be m#atn Toth b####l## (c#e## ######) or ### Grath destudate until "Gird" sound was t### to posum on fire unit. The Blue

LIC Lighting inside the cross-cell Murables Balance of that and sea. Increases the enturated end by survivors

the search or review terms see the modelization protocol Poder-Uc.2019/2024 Correra global doubtive discutive level of review Biss the discipline level of the review

КонтаксыёDevions & Фондамет КонтаксыёDevions

Sound Dutary Inkurs Inkurs Inkurs Inkurs Inkurs

Future level of the Period/Connected Reduction volume level of the Period/Connected Device

Device 10. No. 3 MIL cost to the end of the end The external BT device led NCF rated to line Pare the external BT device to line and as interim A

including I've selected MT devices and I've selected MT devices close to

I am Horizon class and I'm until Place exception: The location not good. Reasservable the unit to other

Insgolo: 34 Taste Mopson metallistock in injury wopson In school station: 100 miles weekly a dow the medication in work and

For next season, recovered year location or free available PM stations/road

(4) Rated Kettler 1

GENERAL SPECIFICATIONS:

Power Source Bidis in DC 0170,76, 1200mA (14-150Hz) reinorganisten Liton latheira. Rechorage by DC 1992/1 through DC 381

Acute Power (ton/kW)
Dilutive Energy (kWh, kWh)

3.1.1.2017 (Figure 2) ^[4,5] 3.1.1.2017 (Figure 2)

1 x USB Connection Cable (For Charging only) 1 x Audio Connection Cable with 3.5 mm plugs

SPECIFICATIONS AND ACCESSORIES ARE SUBJECT

TO CHANGE WITHOUT NOTICE

[Non-Text]

LIMITED WARRANTY

Craig Electronics warrants this product is be free from manufacturing defects in materials and applications.

manufacturing devices in material and workshop under normal use for a period of 150 days from date of purchase. If quarter is required, unless return the product

puro base. IT service is required, please return the product to the store where it was purchased for exchange; or, pack the unit in the original necklace material with all

accessories if applicable, a copy of your sales receipt and a Cumbler's check or Money Order for \$32 (in euro

shipping and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please raise sure that the

cashier check or money order is redeemable through a U.S. bank. Strip your product freight pre-paid. Your unit

will be repaired, replaced or if the unit cannot be repaired or replaced, a refund will be forwarded to you within four

weeks of receipt of your unit. Please ship your unit in: Costa Electronics, Inc.

1160 NW 163 Drive Miami, FL 22189

This warranty is void if the product has been (a) Used in a

conlerial application or rental. b) Dismaged through misuse, negligence, or abuse. c) Modified or repaired by

anywhere other than an authorized Utdg service provider. It) Damaged because it is improperly connected to any other

Note: This warranty does not cover; a) Ordinary adjustments are outlined to the Denver's Matrual which can

departments as retained in the quarter & quarter, which can be performed by the customer. b) Damage to equipment not properly connected to the product. c) Low cost

not properly transmitted at the shipment of VTA, total incurred in shipping the product for repair. d) Damage to the product not used in the USA.

This warranty is not transferable and only applies to the

original purchase. Any implied warranties, including the warranty of merchantability, are limited in duration is the period of this composed property and an property

period of the expressed warranty and no warranty whether expressed or implied shall apply to the product thereafter.

Under no circumstance shall Crisis be liable for any loss or

consequential damage arising out of the use of this product. This warranty gives specific legal rights.

However, you may have other rights which may vary from state to state. Some states do not allow limitations on

implied warranties or exclusion of consequential damage. Therefore, these restrictions may not apply to you.

This product has been manufactured by and is sold under the responsibility of Caoio Electrovics Inc. and Caoio

and responsibility for strong understanding of, and may be. Electronics Inc. is the warrantor in relation to this product. MACHAVIX and SMART. VERY SMART are numbered

Standards of Karinklijke Philips N.V. and are used under Ivorsa from Karinklijke Philips N.V.

To Obtain Service on your Product.

email:[e-mail]

Printed in China MHT060_WC_E3PFK1_B0US

1

。

[Non-Text]

-

[Non-Text]

1

[Non-Text]

|

[Non-Text]

[Non-Text]

[Non-Text]

|

[Non-Text]

5

[Non-Text]

广力云智慧零售收银系统

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

8

[Non-Text]

|

[Non-Text]

》

[Non-Text]

|