MAGNAVOX

MMA3626 - Loudspeaker MAGNAVOX - Free user manual and instructions

Find the device manual for free MMA3626 MAGNAVOX in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice MAGNAVOX MMA3626 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Bookshelf Loudspeaker
Brand Magnavox
Model MMA3626
Speaker Type 2-Way Passive
Power Handling (RMS) 50 Watts
Impedance 8 Ohms
Frequency Response 55 Hz - 20 kHz
Sensitivity 88 dB (1W/1m)
Driver Configuration 1x 6.5" Woofer, 1x 1" Tweeter
Enclosure Type Bass Reflex (Rear Ported)
Dimensions (W x H x D) 10" x 14" x 8" (25.4 x 35.6 x 20.3 cm)
Weight 10 lbs (4.5 kg) each
Recommended Amplifier Power 20 - 100 Watts per channel
Connectivity Binding Posts (Banana Plugs compatible)
Finish Black Wood Grain Vinyl
Grille Removable Black Cloth
Warranty 1 Year Limited

Frequently Asked Questions - MMA3626 MAGNAVOX

How do I connect the speaker to my amplifier?
Use speaker wire with banana plugs or bare wire. Connect the red terminal to positive and black to negative on both speaker and amplifier, ensuring proper polarity.
What is the recommended placement for optimal sound?
Place speakers at ear level, at least 6-8 feet apart, and a few inches away from the wall to avoid bass resonance. Slight toe-in towards the listening position for better imaging.
Can I use these speakers with a subwoofer?
Yes, they pair well with a subwoofer. Set your amplifier to small speaker mode and cross over around 80 Hz to let the subwoofer handle low frequencies.
How do I clean the speaker grille?
Remove the grille gently. Vacuum with a soft brush attachment or wipe with a slightly damp cloth. Avoid soaking the grille. For dust on the cabinet, use a dry microfiber cloth.
What should I do if there is no sound?
Check speaker wire connections at both ends. Verify amplifier is powered on and not in mute mode. Ensure the correct input source is selected. Test with a different audio source.
Are these speakers magnetically shielded?
No, they are not shielded. Keep them at least 3 feet away from CRT TVs or analog monitors to avoid interference.
What is the impedance and can I use them with any amplifier?
Nominal impedance is 8 ohms. Most home stereo amplifiers rated for 8 ohms will work fine. Avoid using with amplifiers that require 4 ohm minimum unless the amplifier is rated for 8 ohms.
How can I reduce static or hissing?
Ensure all connections are tight. Use high-quality shielded speaker cables. Avoid running speaker wire parallel to power cords. Check for ground loops; a power conditioner may help.
What is the maximum power handling?
The RMS power handling is 50 watts. Peak handling is around 100 watts. Exceeding these limits may damage the speakers.
Where can I find replacement parts?
Contact Magnavox customer support or visit their official website. For third-party parts, check authorized dealers or online electronics retailers. The woofer and tweeter are standard sizes.

User questions about MMA3626 MAGNAVOX

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual MMA3626 - MAGNAVOX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MMA3626 by MAGNAVOX.

USER MANUAL MMA3626 MAGNAVOX

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : MAGNAVOX

Model : MMA3626

Category : Loudspeaker