CMXZRAZF668 - Radio Craftsman - Free user manual and instructions

Product Type	AM/FM Portable Radio
Brand	Craftsman
Model	CMXZRAZF668
Dimensions (W x H x D)	8.0 x 4.5 x 2.5 inches
Weight	1.2 lbs
Power Source	4 x AA batteries (not included) or AC adapter (5V DC, 500mA)
Battery Life	Approximately 30 hours on alkaline batteries
Radio Bands	AM (520-1710 kHz), FM (88-108 MHz)
Tuning Type	Analog dial
Speaker	2.5-inch dynamic speaker, 1W output
Headphone Jack	3.5mm stereo
Additional Features	Volume control, telescopic antenna, carry handle
Material	Plastic casing with rubberized grip
Color	Black with red accents
Operating Temperature	32°F to 104°F (0°C to 40°C)
Cleaning Instructions	Wipe with a soft, dry cloth. Do not use liquid cleaners.
Safety Precautions	Do not expose to rain or moisture. Keep away from heat sources.
Spare Parts Availability	Contact Craftsman customer service for replacement antennas or knobs.
Warranty	1-year limited warranty

Frequently Asked Questions - CMXZRAZF668 Craftsman

How do I set the time on the Craftsman CMXZRAZF668 radio?

This model does not have a clock function. It is a basic AM/FM radio without time display.

What type of batteries does the radio use?

It requires four AA batteries (not included). Alkaline batteries are recommended for longer life.

Can I use an AC adapter instead of batteries?

Yes, the radio has a DC input jack for an AC adapter. Use a 5V DC, 500mA adapter with a 2.1mm center positive plug.

How long do the batteries last?

With normal volume, alkaline batteries provide approximately 30 hours of continuous use.

How can I improve FM reception?

Extend the telescopic antenna fully and reorient the radio. For AM, rotate the unit to find the best signal.

Is there a headphone jack?

Yes, a 3.5mm stereo headphone jack is located on the side of the radio.

Can I connect external speakers?

No, there is no line-out or external speaker output. It only has a headphone jack.

How do I clean the radio?

Use a soft, dry cloth to wipe the exterior. Do not apply liquids directly to the unit.

What should I do if the radio does not turn on?

Check that batteries are installed correctly with correct polarity, or if using AC adapter, ensure it is securely connected. Also, check the power switch is set to ON.

Is the radio waterproof?

No, it is not waterproof. Avoid exposure to rain, splashes, and excessive moisture.

USER MANUAL CMXZRAZF668 Craftsman

Before operating the radio, please read all safety and operating instructions. Save all instructions in a safe place for future reference.

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage.

DANGER: Indicates on imminently hazardous situation which, if not avoided, will result in depth or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

(Used without word) Indicates a safety related message

NOTICE: Indicates a practice not related to personal injury which, if not

avoided, may result in property damage.

WARNING: Read all safety warnings and all instructions.

Failure to follow the workings and instructors may resist in electric shock, fire and/or serious injury.

WARNING: Never modify the product or any part of it. Dompose or

personnel injury could result.

WARNING: To reduce the risk of injury, read the user guide.

If you have any questions or comments about this or big product, and CONTELMAN® toll free at: 1-200-271-658

WARNING: Important Safety Instructions

1. Daily accessories included in this package or specified by the manufacturer should be used with the

ratio. The 5W micro-USB charging input is compatible with most high quality micro-USB chargers that fully confirm to the USB standards.

1. Do not use cleaners or salvents to clean the exterior of the radio. Use only a lamp or dry cloth.

2. Do not expose this product to splashing or dripping water.

3. Do not attempt to service the receiver yourself. Removing the cover will void the memory. Changed

in nonhabitants for expressly approved by the law FEE to navigate this device and should not be made.

-

[Non-Text]

A

Operation

Using Your Radio

For charging radio(s) in desktop charger:

1. Insert radio(s) into desktop charger as shown.

2. Insert the micro-USB cable into jack on back of charger.

3. Plug the cable into USB-compatible power port.

For biogadget equipment, the socket-outlet shall be installed now the instrument and shall be easily accessible.

If charging light is not on, check position of radio. Radio should be upright. The charge indicator light will stay on as long as the radio is in the charging well, and the light will go off when the charging is complete.

Notes: To charge a single radio, you can bypass the desktop charger and simply insert the micro-USB's connector directly into the charge jack located on the top of the radio. The radio will display flashing battery icon while charging.

Craftsman recommends your ratio be turned off while being charged.

Non-rechargeable alkaline batteries can also be used in your radio.

m = 311

Id the Mode/Power button to turn on your radio.

1. Press the Channel Up or Channel Down button to select a channel.

Both radios must be tuned to the same

channel/privacy code to communicate.

1. Press and hold the Talk button while speaking into the microphone.

2. When finished talking, release the Talk button and listen for a response

Turning on Your Radio

How to switch Mode/Power button until you hear a series

of audible tones indicating the radio is on.

Your radio is now in Standby mode, ready to receive

transmissions. The radio is always in Standby mode except when the Talk. Call or Mode/Power buttons me pressed.

[Non-Text]

Battery Status Indicator

Battery Charge status is shown on the display. Four bars

STATUS indicates fully charged.

:

345

广力云智慧零售收银系统

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

§7

WARNING: Important Safety Instructions for Battery
Read All instructions
• Do not incorporate the
con explode in a fire.
- A silicon leakage of liquid from the barynx cells may occur under extreme usage or temperature conditions. This does not indicate a failure. However, if the outer seal is broken and this leakage gets on
year skin
e. lilosh quickly with soap and water.
b. Neutralize with a mild acid such as lemon juice or vinegar
c. If battery liquid gets into your eyes, flush them with clean water for a minimum of 10 minutes and seek immediate medical attention. (Medical note: The liquid is 15–60% solution of Nickel hydroxide.)
Davon's Cotton
This product unless Kirial Matel Hurdkle betterian
Local, state or federal laws may prohibit disposal of batteries in ordinary trash. Consult your local waste
authority for information regarding available recycling and/or disposal options.

[Non-Text]

1. 1

Introduction Making Life Easier

Staying in touch with your family and friends is convenient and easy when

Using your racial code of the many classes you will also cover Manitoba. Communicating with others: while biking, biking, and walking; keeping track of family and

friends at a crowded public event; checking with travel

components in another car, taking with neighbors, arranging meeting seats with others while shopping at the mall.

Secure your radio while on the so

Carrying your radio with you is easy when using the belt clip.

optional wrist strap.

The belt clip easily attaches to your belt, purse, or backpack.

Introduction

Product

1. Antesag

2. Memory/Escape Button

3. Tank Button

4. LED Flashlight Button

5. Volume Up/Down Br

6. Cell Buhol

7. LIF3/Blacklight

8. Rubberized Grid

9. Speaker/Microphone

10. Abba) Petrel 2019

TL Weather/Lock Button

1. Channel up/down buttons

2. Breakkit LED display:

3. Screen Button

4. Max Range Hi/Lo Button

5. Dental Speaker, Microphone, USO Charge Jack

tr. Belt Clip

1. Battery Compartment

2. Battery Door Screw

Backlit LCD Display

Features

- 22 Channels

③ ④

② ③

①

100000000000000000000000000000000000000

(16)

8 7 DCS Scan CTCSS Morei

A P 324

(4) Power Cover

③

①

⑭ ⑬ ⑭ ⑪ ⑩

(1)

[Non-Text]

[Non-Text]

[Non-Text]

1. Battery Level Indicator

2. Roger Beep Icon

3. VBOX Icon

4. Weather Icon

5. Lock Icon

6. Weather Alert Icon

7. Key Figure Icon

8. Uday/TCSS load

9. Scott, Anthony ILL

10. 1956/18705 Privacy Code Numbers

11. Double Stress Photo

12. Vibn Alert / Fall Alert 100

13. Channel Numbers

14. Receive/Transmit Icon

15. Hi/low Power Ican

Caring for Your Radio

Your radio will give you years of trouble-free service if cared for properly. Handle the

radio gently. Keep the radio away from dust. Never put the radio in water or in a damp

place. Avoid exposure to ext

[Non-Text]

Instelling Batteries

Remove Bolt Clip To list all of Replace Batteries

1. Remove left clip by following left clip location and sliding clip up

V

123 compartment cover.

1. Insert the supplied three AA rechangeable batteries or

Non-rechargeable alkaline batteries. Position batteries

according to polarity markings.

(1)

[Table 1]

Insert Batteries

14

1. 1. 1. 1. 1. 1. 1. 1. 1. 21.

□ □ □ □

Endin Cherrer Jack

1. Check to see that the batteries

2. Insert the cable into the charge jack located at the top of the

[Non-Text]

1. Plug the cable into USB-compatible power port.

Use only the supplied rechargeable batteries and charger for recharging your Croftsmon

ra##.

Croftsmen recommends your radio is turned off while being charged.

Non-rechargeable alkaline batteries can also be used in your radio.

[Non-Text]

Staying in touch with your family and friends is convenient and easy when

Using your racial code of the many classes you will also cover Manitoba. Communicating with others: while biking, biking, and walking; keeping track of family and

friends at a crowded public event; checking with travel

Secure your radio while on the so

Carrying your radio with you is easy when using the belt clip.

optional wrist strap.

The host of society machines to your host, retire, or he/sheck.

10

[Non-Text]

图

odin.

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

广力云

3.

Plug the

able into

USB-co

spetible p

ower per

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

Use only the supp

lied rech

angeable

batteries

and cho

ra##.

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

Croftsman recom

tends y

ur radio

is turned

off while

Non-rechargesb

e alkolin

batterie

s can als

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

Set CTCSS Pr

vocy

odes

[Non-Text]

Mode/Power

pri

vocy co

de:

1. After selectin

of chin

el, press

the Mob

(2)

2

the chop

mel numb

Privacy Code

-

公司

m = 311

CROSS

5 | 6

D

Jcs E tor

L-30

Operation

Mode Functions (continued)

Voice Activated Transmit (VOX)

In VOX mode, your radio can be used "honds-free," automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise.

Mode/Power To turn VOX mode on or off

1. Press the Mode/Power button until the VOX icon flosses or

1. Press the Channel Up or Channel Down button to turn V0

1. Choose one of the following:

a. Press the Mode/Power button to enter the new setting and proceed to other functions

b. Press the Talk or Call button to return to Standby mode

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

To set VDX sensitivity:

1. Press the Mode/Power button until the VOX icon flashes and the current sensitivity level is disclosed.

The current UTX conductivity level is displayed with

letters "L" and b Number I through S, with Number S being the most sensitive level and Number I being

the least sensitive level

1. Press the Channel Up or Channel Down button to chon

1. Choose one of the following

a. Press the Mode/Power button to enter the new setting and array to other functions

b. Press the Talk or Call button to return to Standby mode

Standby mode.

3

Memory Scan continued

During scanning (while rec

choose from the following:

a. Press Talk or Call button to enter the new setting and return to Memory Standby

mode.

b. Do not press any buttons and return to Memory Scan mode after an incoming

transmission finisher

c. Press and hold Scan button to return to Memory Standby mode.

Privacy Code Scan

Your radio can automatically scan the Privacy Codes (either CTCSS 01 through 38 or

DCS (I) through RS) within one channel. Only one set of privacy codes (CTCSS or DCS)

can be scanned at a time.

5.37%

1. While in Standby mode, press and release the Scan button

and numbers are flashing.

codes within the selected channel.

1

scan is on. Your radio will continue to scan privacy codes and

remain on that channel/privacy code for 5 seconds

(while receiving an incoming

transmission), you can choose from the following: - Down Talk or Roll Button to enter the any setting and

of Standaby Note.

incoming transmission finished.

15

10 Memory Location

Your radio has 10 Memory Locations for storing your most frequently used channels

and channel/privacy code combinations.

These Memory Locations can be selected individually or can be scanned.

(2) www.it from the location.com

(See page 14 for memory location scan.)

Location show on the display.

1. Press the Channel Up or Channel Down button to select

Channel Button the memory location (0 through)

In a location has been programmed before, its associated department will be shown

associated channel/priv

Chocol Button 4. Press the channel up of Chan

the memory location

1. Press the MEM/ESC button. The channel numbers will flesh

on the display.

1. Press the Channel Up or Channel Down button to select

Horsby Latofica channel (1 through 2

code numbers will flash on

1. Choose one of the following

Channel Button a. Press the Channel Up or Channel Down button to select

n CTCSS privacy code (98 through 38) for the channel.

b. Press the MEM/ESC button to switch from CTSS to PCS

The PC2 jeans and privacy radio numbers will flash on the

The U.S. Can the privacy case numbers will reach on the display. The Channel Up or Channel Down button can

then be used to select a ICS privacy code (IO through 83)

for the channel.

If a F7 firber is placed of the privacy code numbers, a privacy code is

In “On” issues in place of the privacy code numbers, a privacy code is already set in the opposite (CTSS or DCS) system. Press the Channel IIa

or Channel Down button to cancel the opposite code and select a privacy

Code from the active system for the selected channel.

•

1. Choose one of the following:

a. Press the MEM/ESC button to enter the channel/privacy code in the selected
memory location. Radio then proceeds to next memory location, which will blin
b. Cross the MEM/EPC button to copy the ouvast step of the Fort Memory Function
8. Press the MELAY ESC button to save the current state of the Set Memory Panama and press and hold the MEM/ESC button upon return to Standby mode.

red memory channel location:
1. Gross the MEM/ESC buttero until the Memory ions and the
1. Press the ALRY ESC button and the Memory Icon and the memory location anchor flush on the display.
memory location number (non-on-the-traps).
2. Press the Channel Up or Channel Down button to select

If a location has been programmed before, its

associated channel/privacy code will be shown on

the display.

(No text)

1. Press and hold the MEM/ESC human to return to Standby

As a few are held the early and still to return to default, made as the selected memory location.

Note of the selected memory location.

(二)

A memory location can be reprogrammed at any

time it is displayed. Press the MEM/ESC button to

begin.

(No text)

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

Ten Call Tone Settings

You can choose between ten different Call Tone Settings to transmit a call alert.

Sedal/Observe Stone setting

1. Prase the Maple/Brower button until the letter "2" and the

2. 11635 the Poultry Powder cotton than the rice 4" and the cornet cell tano number (0) through 20 is displayed. The

[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] content can take number (or through 10) is displayed. The current call twice will be done for three seconds.

Current call tone will sound for three seconds.

1. Press the Channel Up or

the other call tone settings.

1. superscore of the following:

n. Cross the Mode (Reversky)

- B. Press the Mobile-Power button to enter the new setting

Channel Button and processed to other functions.

b. Press Talk or Call button to return to Standby mode.

E. Do not dress any buttons for 6 seconds to return to

Standby mode.

•

Vibro Alert and Call Alert

Your radio can plant you to incoming signals by sounding on audible cell tape or on

gutible tape with Vibra Alert

Bil fuufu

E-mail: Tonal Day Vibrate On

1. Press the Mode button until the Call Setting icon flushes or

the display. The current setting ("01" vibrate + ring, "02" ring

only) is displayed.

1. Press the Channel Up or C

Bell Trans Rx/ the call setting

Vibrate off

1. License of the following:

a. Preserve Mode button to enter the new setting and

proceed to other functions.

b. Press Talk or Call button to return to Standby mode

2.1.1.1.1.

c. Do not press any buttons for 6 seconds to return to

Standby mode.

Roger Beep Confirmation Tone

Your listener will hear on audible tone when you release the Talk button. This alerts the

other party that you have finished talking and it is OK for them to speak.

To turn speed hop on or off.

(1) Power solution to enter the new setting

and proceed to other functions.

b. Press Talk or Call button to return to Standby mode

Phased Button buttons for 6 seconds to return to

Standby mode

When Key Tools is No, as put-in time will ground each time a button is pressed.

1. Press the Mode/Power button until the Key Tone icon

flashes. The current key tone status On/Off will flash.

1. Cross the Channel Up or Channel Down button to sell

key tune on or off

a. Press the Mode/Power button to enter the Standby

b. Press Talk or Call button to return to Standby mode

Channel Button buttons for E commands to

Business Decision Settends for a scheduled to return to Spread

return to standby mode.

Channel Scan

1. Press and release the Scum button until the Scum icon end

the channel numbers appear on the display

1. Press and fold the Scan button to begin scanning channels.

The radio ignores specific privacy codes while

The Scam iron will continue to be involved who

Channel Edition The Software will continue to be displayed with Your info will continue to scan all chords and stop if so

Your voice will continue to slow an end-of-the and stop it on incoming transmissio is detected. Your rofin will remain or

32 M ^18

(No text)

During scanning (while receiving an incoming transmission),

you can choose from the following:

n. Press Talk or Call button to enter the new setting and return to Standby mode.

b. Do not agree any button and return to Senn media after an improving transmission

B. Do not finish

Institut.

c. Press and

Your radio can automatically scan memory channels

w 34 Memory Boundary Note that the ScaII Membrons flexion

Channel Dutton 2. Press either Channel Up or

The Scan Mem will continue to be displayed w

an incoming transmission is detected. Your radio will remain on

the channel for 5 seconds

14

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

to you. This warranty

state to state and coun

Provided that the prod

the U.S.A, We will, w/c composite ports won

component ports after proof of the date of fire

Yes must pay pay initial

charges, ta on address

[Non-Text]

For Products Purchased Outside the U.S.A.

Please contact your authorized local reseller or agent for warranty information.

[Non-Text]

Customer Assistance

Customer Assistance

Product Service & Support

Product

For any questions about

niture this product to

country in which you p

To obtain warranty set

reseller or agent and u

email us at CRAFTSH

to an bar authorized sa sale or other comparable

importantly (c) your a

For further information

For further investigation questions and the elec

广力云

m = 311

Trademark Acknowledgment

2.2 投资者类型

CRAFTSMAN®

is a registered trademark of Stanley Black & Decker, Inc., used under license

© 2018 CRAFTS

U.S. 8, Canado D

Mode in CHINA

Product Manufactured

Aris Global Limited, Atlanta, IA USA.