WRI520GA - Range hood WESTINGHOUSE - Free user manual and instructions
Find the device manual for free WRI520GA WESTINGHOUSE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Westinghouse |
| Model | WRI520GA |
| Width | 90 cm (36 inches) |
| Depth | 50 cm (19.7 inches) |
| Height | 60-120 cm adjustable |
| Weight | 12 kg (26.5 lbs) |
| Power Supply | 220-240 V / 50 Hz |
| Motor Power | 200 W |
| Lighting | 2 x 40 W halogen (G4) |
| Extraction Rate | 800 m³/h max |
| Noise Level | 55 dB (low speed) to 68 dB (max speed) |
| Filter Type | Aluminum grease filter (washable) |
| Number of Speeds | 3 |
| Control Type | Push buttons |
| Venting Type | Ducted or recirculating (charcoal filter optional) |
| Duct Diameter | 150 mm (6 inches) |
| Installation | Under-cabinet or wall-mount |
| Maintenance | Clean grease filter monthly; replace charcoal filter every 6 months |
| Safety Features | Auto shut-off, thermal overload protection |
| Spare Parts | Filters, bulbs, motor available through authorized service |
Frequently Asked Questions - WRI520GA WESTINGHOUSE
How do I install the WRI520GA range hood?
Installation should be done by a qualified professional. Ensure the hood is mounted at least 65 cm above cooktop for electric or 75 cm for gas. Use the included template for hole drilling and secure with screws. For ducted mode, connect 150 mm ducting. For recirculating mode, install charcoal filters.
How often should I clean the grease filter?
The aluminum grease filter should be cleaned every month with warm soapy water or in a dishwasher at low temperature. Dry thoroughly before reinstalling. A clogged filter reduces efficiency and may cause overheating.
Can I use the hood without a charcoal filter?
Yes, if the hood is vented externally (ducted mode). For recirculating mode, charcoal filters are essential to remove odors. If using without charcoal filter, ensure duct is connected to outside.
What is the maximum noise level?
Noise level ranges from 55 dB (low speed) to 68 dB (max speed). This is comparable to normal conversation. Regular maintenance ensures quieter operation.
How do I replace the light bulb?
Disconnect power. Remove the bulb cover by pressing clips. Replace with a 40 W halogen G4 bulb (max 20 W LED equivalent). Do not touch the bulb with bare hands; use a cloth.
What should I do if the hood stops working?
Check if the power cord is plugged in and the circuit breaker is not tripped. If the motor doesn't run, the thermal overload may have tripped; allow to cool. If still faulty, contact Westinghouse service.
Is the hood suitable for an island?
This model is designed for under-cabinet or wall-mount installation, not for island use. For islands, consider a ceiling-mounted or pendant range hood.
What are the dimensions of the WRI520GA?
The hood is 90 cm wide, 50 cm deep, and height adjustable between 60-120 cm. Weight is approximately 12 kg. Ensure cabinet space fits these dimensions.
How do I change from ducted to recirculating mode?
First, remove the duct cover and seal the duct opening. Then install charcoal filters into the designated slots above the motor. The hood can then recirculate air through top grille.
Where can I get spare parts like filters?
Spare parts are available through Westinghouse authorized service centers. Use model number WRI520GA when ordering. Charcoal filters (model CF520) and bulbs are common replacements.
User questions about WRI520GA WESTINGHOUSE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual WRI520GA - WESTINGHOUSE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WRI520GA by WESTINGHOUSE.