VRS1 - Loudspeaker Bogen - Free user manual and instructions

Product Type	Speaker (Ceiling / Wall Mount)
Brand	Bogen
Model	VRS1
Impedance	8 ohms
Power Handling (RMS)	30 Watts
Frequency Response	80 Hz – 20 kHz (±3 dB)
Sensitivity (1W/1m)	90 dB
Dimensions (H x W x D)	8.2 x 8.2 x 8.2 inches (208 x 208 x 208 mm)
Weight	5.2 lbs (2.4 kg)
Material	ABS plastic with steel grille
Color	Black (white optional)
Mounting	Wall bracket included; ceiling T-bar adapter optional
Connector Type	Spring-loaded screw terminals (accepts 16-22 AWG)
Power Source	Passive (no external power required)
Application	Indoor paging, background music, commercial sound
Transformer Tap (70V/100V)	1.25W, 2.5W, 5W, 10W, 20W (selectable)
IP Rating	IP40 (splash resistant not guaranteed)
Operating Temperature	32°F – 104°F (0°C – 40°C)
Included Accessories	Mounting bracket, screws, wire nuts, installation guide
Cleaning Instructions	Wipe with dry cloth; do not use solvents or water

Frequently Asked Questions - VRS1 Bogen

What is the impedance of the Bogen VRS1 speaker?

The Bogen VRS1 has an impedance of 8 ohms for low-impedance systems, and also offers selectable transformer taps for 70V/100V distributed audio systems.

Can the VRS1 be used outdoors?

The VRS1 is designed for indoor use only. It has an IP40 rating, which means it is protected against solid objects larger than 1mm but not against water. Exposure to moisture may damage the speaker.

How do I wire the VRS1 for a 70V system?

Use the transformer tap selector on the back of the speaker to choose the desired wattage (1.25W, 2.5W, 5W, 10W, or 20W). Connect the amplifier output to the 70V input terminal. Ensure the total wattage of all speakers does not exceed the amplifier’s rated power.

What is the frequency response range of the VRS1?

The frequency response is 80 Hz to 20 kHz (±3 dB), making it suitable for both paging and background music applications.

Does the VRS1 come with a mounting bracket?

Yes, the VRS1 includes a wall mounting bracket and necessary hardware. For ceiling T-bar mounting, an optional adapter is required.

What size wire should I use to connect the VRS1?

Bogen recommends 16 to 22 AWG stranded wire for connections. Use spring-loaded terminals for a secure fit.

Can I use the VRS1 with a standard home amplifier?

Yes, when using the 8 ohm low-impedance setting, the VRS1 can be powered by any standard home amplifier rated for 8 ohm speakers. The power handling is 30W RMS.

How do I clean the VRS1 speaker?

Clean the enclosure with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners, as they may damage the grille or plastic housing.

What is the weight of the VRS1?

The speaker weighs approximately 5.2 lbs (2.4 kg), which includes the mounting bracket.

Is the VRS1 compatible with Bogen amplifiers?

Yes, the VRS1 is designed to work seamlessly with Bogen amplifiers and paging systems. It is optimized for Bogen’s 70V distributed audio products.

USER MANUAL VRS1 Bogen

The Bogen VRS1 is a wall-mountable, vandal-resistant speaker with call-button designed for use with Bogen Multicom, Quantum, and Multi-Graphic communication systems. It consists of an 8-ohm loudspeaker, 25V transformer (tap fixed at 1/2 watt), and call-in switch mounted to a heavy-gauge stainless steel plate. The call-in switch can be wired to provide either momentary or latching operation. The plate may be mounted to a 2-1/2" deep Gang Box (4-1/2" W x 6-13/16" H), such as Steel City (H2BD-3/4 &1), with one-way security screws.

INSTALLATION

A shielded-pair plus one-conductor cable is required, such as in West Penn #358 or Belden #8724. The unshielded conductor should be used for the "A" Terminal (Red) connection, the shield conductor for the "G" Terminal (Blue) connection, and the "S" Terminal (Black & Yellow) connections should use the two shielded conductors. Refer to the appropriate system installation instructions to terminate the cable at the system control center.

VRS1 Wire Color	Conductor
White	Multicom/Quantum Station Port "A" Terminal (Momentary Contact)
Red	Multi-Graphic Station Port "A" Terminal (Latching Contact)
Blue	All Systems Station Port "G" Terminal
Black	All Systems Station Port "S" Terminal
Yellow	All Systems Station Port "S" Terminal

VRS1 Schematic Diagram

LIMITED WARRANTY

Bogen's Vandal-Resistant Speakers are warranted to be free from defects in material or workmanship for two (2) years from the date of sale to the original purchaser. Any part of the product covered by this warranty that, with normal installation and use, becomes defective will be repaired or replaced by Bogen, at our option, provided the product is shipped insured and prepaid to: Bogen Factory Service Department, 50 Spring Street, Ramsey, NJ 07446, USA. The product will be returned to you freight prepaid. This warranty does not extend to any of our products that have been subjected to abuse, misuse, improper storage, neglect, accident, improper installation or have been modified or repaired or altered in any manner whatsoever, or where the serial number or date code has been removed or defaced.

THE FOREGOING LIMITED WARRANTY IS BOGEN'S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTEN ALLOWABLE BY LAW. Bogen's liability arising out of the manufacture, sale or supplying of products or their use or disposition, whether based upon warranty, contract, tort or otherwise, shall be limited to the price of the product. In no event shall Bogen be liable for special, incidental or consequential damages (including, but not limited to, loss of profits, loss of data or loss of use damages) arising out of the manufacture, sale or supplying of products, even if Bogen has been advised of the possibility of such damages or losses. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.

Products that are out of warranty will also be repaired by the Bogen Factory Service Department -- same address as above or call 201-934-8500. The parts and labor involved in these repairs are warranted for 90 days when repaired by the Bogen Factory Service Department. All shipping charges in addition to parts and labor charges will be at the owner's expense. All returns require a Return Authorization number.

08/10/2004