ASWB1 - Loudspeaker Bogen - Free user manual and instructions
Find the device manual for free ASWB1 Bogen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Loudspeaker |
| Brand | Bogen |
| Model | ASWB1 |
| Speaker Type | Wall-mounted paging speaker |
| Power Rating | 5 W (tap selectable: 0.6, 1.2, 2.5, 5 W) at 70V/100V |
| Impedance | 8 ohms (low impedance mode) |
| Frequency Response | 150 Hz - 12 kHz |
| Sensitivity | 92 dB SPL (1W/1m) |
| Dimensions (H x W x D) | 7.5 in x 5.5 in x 4 in (191 x 140 x 102 mm) |
| Weight | 2.2 lb (1 kg) |
| Mounting | Includes wall-mount bracket with swivel adjustment |
| Color | White or black (paintable grille) |
| Material | ABS plastic enclosure, steel grille |
| Input Connectors | Screw terminals for 70V/100V and 8 ohm |
| Functions | Power tap selection, low impedance mode, 50/60 Hz compatible |
| Safety Features | Built-in overload protection |
| Maintenance | Clean with dry cloth; do not use solvents. Inspect wiring periodically. |
| Spare Parts | Replaceable grille, transformer (if faulty) |
| Repairability | Transformer and driver can be replaced by qualified personnel |
| Package Contents | Speaker, mounting bracket, screws, user manual |
Frequently Asked Questions - ASWB1 Bogen
What is the power handling of the Bogen ASWB1 loudspeaker?
The ASWB1 has a maximum power rating of 5 watts in 70V/100V mode, with tap settings for 0.6, 1.2, 2.5, and 5 watts. It also supports low-impedance (8 ohms) operation.
How do I wire the ASWB1 for 70V or 100V systems?
Connect the amplifier output to the speaker terminals marked '70V' or '100V'. Select the desired power tap by moving the switch to the corresponding wattage setting. Ensure the total load does not exceed the amplifier's capacity.
Can the ASWB1 be used in low-impedance systems?
Yes, it can be used in 8 ohm low-impedance systems. Connect to the terminals marked '8 ohms' and set the power tap to the lowest setting to avoid overdriving.
What are the physical dimensions of the ASWB1?
The speaker measures approximately 7.5 inches high, 5.5 inches wide, and 4 inches deep (191 x 140 x 102 mm). It weighs about 2.2 pounds (1 kg).
How do I mount the ASWB1 to a wall?
The speaker includes a wall-mount bracket that can be attached to the wall using the provided screws. The bracket allows swivel adjustment for aiming the speaker. Ensure secure mounting to support the weight.
Is the ASWB1 suitable for outdoor use?
The ASWB1 is designed for indoor use. If used outdoors, it should be protected from direct weather exposure with an appropriate cover or housing.
What is the frequency response of the ASWB1?
The frequency response ranges from 150 Hz to 12 kHz, making it suitable for speech and background music applications.
Can I paint the ASWB1 to match my decor?
Yes, the grille is paintable. Use a high-quality spray paint suitable for plastic. Remove the grille before painting and allow it to dry completely before reattaching.
What maintenance does the ASWB1 require?
Periodically clean the grille and enclosure with a soft dry cloth. Check wiring connections for corrosion or looseness. No internal maintenance is needed unless a component fails.
Where can I find replacement parts for the ASWB1?
Contact Bogen or an authorized dealer for replacement grilles, transformers, or drivers. Repairs should be performed by qualified service personnel.
User questions about ASWB1 Bogen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual ASWB1 - Bogen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ASWB1 by Bogen.
USER MANUAL ASWB1 Bogen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bogen
Model : ASWB1
Category : Loudspeaker