MPS1 - Loudspeaker Bogen - Free user manual and instructions
Find the device manual for free MPS1 Bogen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Loudspeaker |
| Brand | Bogen |
| Model | MPS1 |
| Impedance | 8 ohms |
| Power Handling (RMS) | 30 W |
| Frequency Response | 80 Hz - 20 kHz |
| Sensitivity | 90 dB SPL (1W/1m) |
| Dimensions (H x W x D) | 10.5 x 7.5 x 6.5 inches |
| Weight | 5 lbs |
| Mounting Type | Wall or ceiling mount (bracket included) |
| Color | White or black |
| Enclosure Material | ABS plastic |
| Input Connectors | Spring-loaded terminals |
| Application | Paging, background music, public address |
| Cleaning Instructions | Wipe with a dry, soft cloth; do not use liquid cleaners |
| Safety Precautions | Keep away from moisture; do not expose to rain or splashing liquids |
| Spare Parts Availability | Contact Bogen for replacement grilles or mounting hardware |
Frequently Asked Questions - MPS1 Bogen
How do I wire the MPS1 speaker?
Connect the amplifier output to the spring-loaded terminals on the speaker. Ensure proper polarity: red to positive (+) and black to negative (-). For 70V systems, consult the manual for tap settings.
What is the impedance of the MPS1?
The MPS1 has an impedance of 8 ohms. It can be used with most standard amplifiers. For multi-speaker setups, calculate total impedance to avoid overloading the amp.
Can I use the MPS1 outdoors?
The MPS1 is designed for indoor use. If used outdoors, it must be sheltered from rain and direct sunlight. Consider a weatherproof enclosure.
How do I mount the MPS1 on a wall?
Use the included mounting bracket. Attach the bracket to the wall with screws (not supplied), then slide the speaker onto the bracket until it clicks. Ensure the speaker is securely fastened.
What power handling does this speaker have?
The MPS1 handles up to 30 watts RMS. For best performance, use an amplifier that delivers 10-30W per channel. Exceeding 30W may damage the speaker.
Why is there no sound from my MPS1?
Check the following: amplifier powered on, volume turned up, wires securely connected to both speaker and amp, and correct input source. Also verify the amplifier is not in protect mode.
Can I paint the MPS1 to match my decor?
Yes, the white version can be painted. Use acrylic-based paint or spray paint designed for plastic. Remove the grille before painting and let it dry completely.
What is the frequency response of the MPS1?
The frequency response is 80 Hz to 20 kHz. This covers typical speech and music range, making it suitable for paging and background music.
How do I clean the MPS1?
Unplug the speaker. Use a soft, dry cloth to wipe the enclosure. For the grille, a vacuum with a brush attachment can remove dust. Do not use water or solvents.
Is the MPS1 compatible with 70V systems?
The standard MPS1 is an 8-ohm speaker and not directly compatible with 70V lines. For 70V systems, you need a step-down transformer or a 70V version of the speaker (if available).
User questions about MPS1 Bogen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual MPS1 - Bogen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MPS1 by Bogen.
USER MANUAL MPS1 Bogen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bogen
Model : MPS1
Category : Loudspeaker