X316ST - Projector OPTOMA - Free user manual and instructions
Find the device manual for free X316ST OPTOMA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DLP Projector |
| Display Technology | DLP Texas Instruments |
| Native Resolution | XGA (1024 x 768) |
| Brightness | 3000 ANSI lumens |
| Contrast Ratio | 20,000:1 |
| Projection Ratio (distance/width) | 0.617:1 (ultra short throw) |
| Image Size (diagonal) | 30 to 300 inches |
| Lamp Life (normal/eco mode) | 5000 / 6000 hours |
| Power Supply | 100-240V AC, 50-60 Hz |
| Power Consumption (normal/standby) | 260 W / < 0.5 W |
| Dimensions (L x D x H) | 315 x 224 x 112 mm |
| Weight | 2.9 kg |
| Built-in Speaker | 2 W mono |
| 3D Functions | 3D compatible (DLP Link, HDMI 1.4a) |
| Keystone Correction | Vertical ±40°, automatic |
| Maintenance | Air filter cleaning every 500 hours |
| Security | Kensington lock, password |
| Spare Parts | Replacement lamp (model SP.89G01.001) |
| Repairability | Repairability score: 7.2/10 |
Frequently Asked Questions - X316ST OPTOMA
How do I connect my computer to the OPTOMA X316ST projector?
Use a VGA or HDMI cable. Connect one end to your PC and the other to the corresponding port on the projector. Select the appropriate source using the Source button on the remote control.
What is the maximum supported resolution of the X316ST?
The native resolution is XGA (1024x768). It can accept signals up to 1920x1080 (Full HD) via HDMI but will downscale them to its native resolution.
How do I clean the projector's air filter?
Turn off the projector and unplug it. Remove the filter cover, take out the filter, and gently vacuum the dust. Replace the filter and cover. Do this every 500 hours of use.
The projector displays a tilted image, how do I correct it?
Use the automatic or manual keystone correction. Go to the Image > Keystone Correction menu and adjust the value until the image is straight.
How do I replace the lamp of the OPTOMA X316ST projector?
Turn off the projector and let it cool down. Unscrew the lamp cover, remove the old lamp, insert the new one (model SP.89G01.001), and screw it back. Reset the lamp counter in the menu.
The projector does not turn on, what should I do?
Check that the power cable is properly connected and the outlet works. If the LED indicator blinks red, wait for the projector to cool down (overheating). If the problem persists, contact customer service.
Can I use the projector with a mobile device?
Yes, via HDMI with an MHL adapter if your mobile supports it. Some wireless adapters can also be used via the USB port (power only).
What is the minimum distance to get a 100-inch image?
With a projection ratio of 0.617:1, place the projector about 1.5 m from the screen for a 100-inch diagonal.
How do I activate eco mode to extend lamp life?
Press the ECO button on the remote control or go to the Settings > Lamp Mode > Eco menu. Brightness decreases but lamp life increases to 6000 hours.
The projector makes a loud fan noise, is this normal?
Yes, the fan maintains temperature. In Eco mode, the noise is reduced. Clean the filter if the noise becomes excessive. In case of abnormal noise, check the air intake.
User questions about X316ST OPTOMA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual X316ST - OPTOMA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X316ST by OPTOMA.