Saros ICE4T-B-T-EACH - Pregnant Crestron - Free user manual and instructions
Find the device manual for free Saros ICE4T-B-T-EACH Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pendant Loudspeaker |
| Brand | Crestron |
| Model | Saros ICE4T-B-T-EACH |
| Speaker Configuration | 2-way, coaxial |
| Woofer Size | 4 inches (101.6 mm) |
| Tweeter Size | 1 inch (25.4 mm) soft dome |
| Frequency Response | 70 Hz - 20 kHz (±3 dB) |
| Power Handling (Program) | 130 Watts |
| Power Handling (Continuous Pink Noise) | 65 Watts |
| Transformer Taps (70V/100V) | 60W, 30W, 15W, 7.5W (and 8 Ohm bypass) |
| Impedance (8 Ohm bypass) | 8 Ohms |
| Sensitivity (1W/1m) | 87 dB SPL |
| Maximum SPL | 108 dB SPL (peak) |
| Coverage Angle (Conical) | 110° |
| Dimensions (Diameter x Height) | 6.7 in x 7.5 in (170 mm x 191 mm) |
| Weight | 5.5 lb (2.5 kg) |
| Enclosure Material | ABS with UV-resistant coating |
| Color | Black |
| Mounting | Pendant mount (cable included) |
| Connectors | 4-pin Euroblock (input and loop-through) |
| Certifications | RoHS, CE, UL |
| Protection Rating | IP-55 (with optional cover) |
Frequently Asked Questions - Saros ICE4T-B-T-EACH Crestron
What is the recommended amplifier power for the Saros ICE4T-B-T-EACH?
The speaker handles up to 130W program power. For optimal performance, use an amplifier delivering 65W to 130W RMS per channel at the appropriate tap setting.
How do I select the transformer tap?
The speaker has a selector switch for 70V/100V taps (60W, 30W, 15W, 7.5W) or 8 Ohm bypass. Choose the tap that matches your system's constant-voltage line and desired power level.
Can this speaker be used outdoors?
Yes, with the optional IP-55 cover kit, it is suitable for covered outdoor areas. Without the cover, it is intended for indoor use only.
What is the coverage area of this pendant speaker?
With a 110° conical coverage, a single speaker can cover approximately 200 sq ft (18.6 m²) at an 8 ft mounting height.
How do I wire the speaker?
Connect the amplifier output to the input terminals of the 4-pin Euroblock connector. Use the loop-through terminals to daisy-chain additional speakers. Ensure polarity is consistent (+ to +, - to -).
What is the maximum suspension cable length?
The included safety cable supports up to 10 ft (3 m) drop. For longer drops, use a Crestron-approved extension cable.
Is the speaker plenum-rated?
Yes, the Saros ICE4T-B-T-EACH meets UL 2043 for use in air-handling spaces when installed with proper fittings.
What tools are needed for installation?
You will need a Phillips screwdriver for the Euroblock connectors, a wire stripper for cable preparation, and a ladder for mounting.
How do I clean the speaker?
Wipe the enclosure with a dry soft cloth. Do not use water, solvents, or abrasive cleaners as they may damage the finish.
What is the warranty period?
Crestron offers a limited lifetime warranty for the Saros ICE4T series. Check with your dealer for specific terms.
User questions about Saros ICE4T-B-T-EACH Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual Saros ICE4T-B-T-EACH - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Saros ICE4T-B-T-EACH by Crestron.