HBCS1D10W - Barcode scanners Hamlet - Free user manual and instructions

Product Type	Barcode Scanner
Brand	Hamlet
Model	HBCS1D10W
Laser Class	Class 2 (visible laser radiation)
Laser Standard	IEC 60825-1, EN 60825-1:2014
Power Off	Via scanning power-off barcode
Pairing Indicator	Red LED flashes once per second
Compliance	RoHS, WEEE, RED, CE
Operating Environment	Domestic (Class B)
Safety	Do not stare into beam; momentary exposure not harmful
Disposal	Separate collection for WEEE (electro/electronic waste)
Manufacturer	Hamlet ([e-mail])
Importer	CAREGATI ALIA SPA, Scandiano (RE), Italy
Website	www.hamletcom.com

Frequently Asked Questions - HBCS1D10W Hamlet

How do I power off the scanner?

To power off the scanner, scan the dedicated power-off barcode provided in the manual. The scanner will emit a long beep and turn off.

What laser class is the HBCS1D10W?

The scanner is a Class 2 laser product. It uses a low-power visible light diode. Momentary exposure is not known to be harmful, but avoid staring into the beam.

Is it safe to use the scanner at home?

Yes, it is a Class B product suitable for domestic use. However, it may cause radio interference; if so, the user should take adequate measures such as repositioning the device.

How do I pair the scanner with the receiver?

After pairing, the red LED on the receiver will flash approximately once per second. The manual does not specify the pairing procedure in detail; refer to the included instructions for specific steps.

What should I do if the scanner causes radio interference?

Since this is a Class B device, it can cause interference in a domestic environment. If interference occurs, try moving the scanner away from other electronics or consult the CE declaration for further guidance.

How can I obtain the CE declaration of conformity?

The complete CE declaration of conformity can be obtained by contacting Hamlet at [e-mail]. Provide your product model and requested documentation.

What are the disposal instructions?

Dispose of the product in an environmentally friendly way by placing it in separate bins for electro/electronic waste (WEEE) or returning it to your retailer for free collection. Follow local regulations.

What standards does the scanner comply with?

The scanner complies with RoHS Directive 2011/55/EU & 2015/863/EU, WEEE Directive 2002/96/CE, 2003/108/CE, RED Directive 2014/53/EU, and laser safety standards IEC 60825-1 and EN 60825-1:2014.

Can I use the scanner with other devices?

The scanner is designed to work with its included receiver. Compatibility with other devices is not specified; for best performance, use the original receiver.

How do I know when the scanner is paired?

After successful pairing, the red LED indicator on the receiver will flash approximately once per second. A long beep may also indicate the scanner is ready.

USER MANUAL HBCS1D10W Hamlet

thanks for choosing an Hamlet product. Please carefully follow the instructions for its use and maintenance and, once this item has run its life span, we kindly ask You to dispose of it in an environmentally friendly way, by putting it in the separate bins for electro/electronic waste, or to bring it back to your retailer who will collect it for free.

We inform You this product is manufactured with materials and components in compliance with RoHS Directive 2011/55/EU & 2015/863/EU, WEEE Directive 2002/96/CE, 2003/108/CE Italian Legislative Decree 2006/151 and RED Directive 2014/53/EU for the following standards:

EN 60958-1: 2006 + A11: 2009 - A1: 2010 - A12: 2011 + A2: 2013, EN 62479: 2010.

ETSI EN 301 469-1 V1.9.2 (2011-09). ETSI EN 301 469-17 V2.2.1 (2012-09). ETSI EN 300 328 V1.8.1 (2012-06).

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

CE !

The complete CE declaration of conformity of the product can be obtained by contacting Hamlet at [e-mail].

Visit www.hamletcom.com for complete information on Hamlet products and to access downloads and technical support.

Imported by:

CAREGATI ALIA SPA - Scandiano (RE) Italy

All trademarks and company names mentioned in this manual are used for description purpose only and remain property of their respective owners. The material in this document is for information only. Contents, specifications and appearance of the product are indicative and may change without notice.

Laser Devices

Hamlet products using lasers comply with IEC 60825-1. EN 60825-1: 2014. The laser classification is marked on one of the labels on the product. Class 1 Laser devices are not considered to be hazardous when used for their intended purpose.

The following statement is required to comply with US and international regulations:

Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure.

Class 2 Laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 Laser is not known to be harmful.

In accordance with Clause 5, IEC 60825 and EN 60825, the following information is provided to the user: CLASS 1. CLASS 1 LASER PRODUCT

CLASS 2: VISIBLE LASER RADIATION

DO NOT STARE INTO BEAM

CLASS 2 CASER PRODUCT

Gentis Cliente,

Scan this barcode and the scanner will power off after a long beep.

Note: After pairing, red led indicator in receiver will flash about 1 time/sec.

IMPOST. SALVATAGGIO DATI