DA 12V/6V DUAL EQ - Receiver Extron - Free user manual and instructions
Find the device manual for free DA 12V/6V DUAL EQ Extron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Distribution Amplifier |
| Brand | Extron |
| Model | DA 12V/6V DUAL EQ |
| Input Signal | Composite video or line-level audio via BNC |
| Output Signal | Dual buffered outputs with equalization |
| Number of Inputs | 1 |
| Number of Outputs | 2 |
| Equalizer Bands | 2 (Low and High frequency) |
| Frequency Response | 20 Hz to 20 kHz |
| Signal-to-Noise Ratio | >90 dB |
| Input/Output Voltage | 12V or 6V DC (selectable per output) |
| Power Supply | External 12V DC adapter |
| Power Consumption | 5W max |
| Dimensions (H x W x D) | 1.7 in x 4.3 in x 3.0 in |
| Weight | 0.5 lb (0.23 kg) |
| Connectors | BNC female |
| Controls | EQ gain trimmers (2 per output) |
| Indicators | Power LED (green) |
| Operating Temperature | 0 to 50 °C |
| Compliance | CE, FCC Class A |
| Accessories Included | Power supply, mounting brackets |
Frequently Asked Questions - DA 12V/6V DUAL EQ Extron
How do I connect the DA 12V/6V DUAL EQ?
Connect your source to the input BNC connector. Then connect your displays or recording devices to the two output BNC connectors. Ensure the power supply is connected and the unit is powered on.
What is the purpose of the EQ controls?
The EQ controls allow you to adjust the low and high frequency response independently for each output. This is useful for compensating for cable losses or tailoring the signal to specific equipment.
Can I use the DA with audio signals?
Yes, the DA 12V/6V DUAL EQ is designed for analog audio signals. Use appropriate BNC-to-RCA or BNC-to-XLR adapters if needed.
What voltage does each output provide?
Each output can be set to either 12V or 6V DC via internal jumpers. Check the manual for jumper locations and settings.
Why is there no signal at the output?
First, verify that the power LED is lit. Then check all cable connections. Ensure the source is active. If using EQ, ensure the gain trimmers are not set to minimum. Try bypassing the EQ by setting them to center detent.
Can I daisy-chain multiple DA units?
Yes, you can cascade units by connecting an output of one unit to the input of another. However, be mindful of signal degradation and ensure proper termination.
How do I clean the unit?
Disconnect power and use a soft, dry cloth to wipe the exterior. Do not use liquids or abrasive cleaners. Keep vents clean to prevent overheating.
What does the power LED indicator mean?
A steady green LED indicates normal operation. If the LED is off, check power connections and the adapter. No other LED colors are used.
Is the unit rackmountable?
Yes, the DA 12V/6V DUAL EQ can be mounted using the optional Extron RackMount kit (sold separately). It occupies 1 rack unit height.
What is the warranty period?
Extron provides a limited 3-year warranty on parts and labor. For details, refer to the warranty card included with the product.
User questions about DA 12V/6V DUAL EQ Extron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual DA 12V/6V DUAL EQ - Extron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DA 12V/6V DUAL EQ by Extron.