TP-POE-HP-48GD - Network card Tycon Systems - Free user manual and instructions
Find the device manual for free TP-POE-HP-48GD Tycon Systems in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power over Ethernet (PoE) Injector / Network Card |
| Model | TP-POE-HP-48GD |
| Brand | Tycon Systems |
| Input Power | 100-240V AC, 50/60 Hz |
| Output Power | 48V DC, 2A (96W) |
| PoE Standard | IEEE 802.3af/at (PoE+), up to 30W per port |
| Data Rate | 10/100/1000 Mbps Gigabit Ethernet |
| Ports | 1x RJ45 Input, 1x RJ45 PoE Output |
| Dimensions (L x W x H) | 120 x 80 x 30 mm (4.7 x 3.1 x 1.2 in) |
| Weight | 200 g (7.0 oz) |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 10% to 90% non-condensing |
| Safety Certifications | CE, FCC, RoHS |
| Overload Protection | Yes, automatic reset |
| Surge Protection | Yes, up to 6kV |
| LED Indicators | Power, PoE Active, Link/Activity |
| Maintenance | Wipe with a soft, dry cloth. Do not use liquids or solvents. |
| Safety Instructions | Use in dry indoor environment. Do not open the device. Disconnect power before cleaning. |
| Spare Parts / Repairability | No user-serviceable parts. Contact Tycon Systems for service. |
Frequently Asked Questions - TP-POE-HP-48GD Tycon Systems
What is the TP-POE-HP-48GD used for?
The TP-POE-HP-48GD is a Power over Ethernet (PoE) injector that combines data and power over a single Ethernet cable, allowing you to power devices such as IP cameras, wireless access points, and VoIP phones.
Does the TP-POE-HP-48GD support Gigabit Ethernet?
Yes, it supports 10/100/1000 Mbps Gigabit Ethernet for high-speed data transmission.
What is the maximum power output per port?
The device provides up to 30W per PoE port (IEEE 802.3at PoE+ standard), suitable for high-power devices.
How do I connect the TP-POE-HP-48GD?
Connect your router or switch to the DATA IN port using an Ethernet cable. Then connect the DATA & POWER OUT port to your PoE-compatible device. Finally, plug the power supply into a wall outlet.
Can I use the TP-POE-HP-48GD outdoors?
The device is designed for indoor use only. If outdoor use is required, it must be installed in a weatherproof enclosure.
What should I do if the PoE LED is not lit?
Check that the connected device is PoE-compliant and that the power supply is plugged in. Also verify the Ethernet cable is properly connected. If the issue persists, test with another device.
Is the TP-POE-HP-48GD compatible with non-PoE devices?
No, it is intended for PoE-compatible devices. Using it with non-PoE devices may damage them. Always check device specifications.
What is the input voltage range?
The unit accepts 100-240V AC, 50/60 Hz via the included power adapter.
Does the TP-POE-HP-48GD provide surge protection?
Yes, it features built-in surge protection up to 6kV to safeguard connected equipment from power spikes.
How do I reset the device?
The TP-POE-HP-48GD has no reset button. To reset, unplug the power supply for 10 seconds and plug it back in. For persistent issues, contact Tycon Systems support.
User questions about TP-POE-HP-48GD Tycon Systems
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card in PDF format for free! Find your manual TP-POE-HP-48GD - Tycon Systems and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TP-POE-HP-48GD by Tycon Systems.