TP-NCMS412-24 - Adapter / Network Card Tycon Systems - Free user manual and instructions
Find the device manual for free TP-NCMS412-24 Tycon Systems in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Adapter / Network Card |
| Brand | Tycon Systems |
| Model | TP-NCMS412-24 |
| Dimensions (L x W x H) | 120 x 80 x 25 mm (4.72 x 3.15 x 0.98 in) |
| Weight | 200 g (7.05 oz) |
| Input Voltage | 12V DC |
| Power Consumption | 5W max |
| Operating Temperature | -20°C to 70°C |
| Network Interfaces | 1 x RJ-45 10/100/1000, 1 x SFP |
| Standards Conformance | IEEE 802.3, 802.3u, 802.3ab |
| Primary Function | Media converter between copper and fiber optic |
| Transmission Rate | Up to 1000 Mbps |
| Fiber Distance | Up to 20 km (single-mode) or 550 m (multi-mode) |
| Mounting Options | DIN rail or surface mount |
| LED Indicators | Power, Link/Act |
| Maintenance | Clean with a dry cloth when powered off |
| Cleaning | Use only a soft, dry cloth; avoid solvents |
| Safety Features | Overvoltage protection, short-circuit protection |
| Repairability | Maintenance-free design; no user-serviceable parts |
| Included Accessories | Quick start guide, power adapter |
| Warranty | 1 year |
Frequently Asked Questions - TP-NCMS412-24 Tycon Systems
What are the power supply specifications for the TP-NCMS412-24?
The TP-NCMS412-24 requires a 12V DC power supply. Always use the provided adapter to ensure proper voltage and avoid damaging the device.
How do I connect the media converter?
Connect your Ethernet cable to the RJ-45 port and a fiber optic cable to the SFP port. Ensure the cables are securely inserted and check that the Link/Act LEDs light up to confirm a valid connection.
Is the TP-NCMS412-24 compatible with Gigabit networks?
Yes, this device supports 10/100/1000 Mbps speeds, making it fully compatible with standard Gigabit Ethernet networks.
Can the TP-NCMS412-24 be used outdoors?
It is designed for indoor use, but it can operate in extreme temperatures from -20°C to 70°C. For outdoor installations, protect it from direct exposure to moisture or excessive dust.
How should I clean the TP-NCMS412-24?
Power off the device and wipe it with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the internal components.
What should I do if the LEDs do not light up?
First, verify that the power adapter is properly connected and supplying 12V DC. Then check the network cables for damage and ensure they are firmly plugged into the ports. If the issue persists, the device may require professional service.
What types of fiber optic cables are supported?
The SFP port accepts standard SFP modules for both multi-mode and single-mode fiber, allowing flexible deployment depending on your distance requirements.
Does the TP-NCMS412-24 include an SFP module?
No, the SFP module is sold separately. You can choose the appropriate module based on the fiber type and distance you need.
How do I mount the device?
The TP-NCMS412-24 can be mounted on a DIN rail using the included clip, or placed on any flat surface using the provided screws for a secure installation.
What is the maximum fiber transmission distance?
The maximum distance depends on the SFP module used. For single-mode fiber, this model supports up to 20 km, while multi-mode fiber typically reaches 550 meters at Gigabit speeds.
User questions about TP-NCMS412-24 Tycon Systems
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Adapter / Network Card in PDF format for free! Find your manual TP-NCMS412-24 - Tycon Systems and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TP-NCMS412-24 by Tycon Systems.
USER MANUAL TP-NCMS412-24 Tycon Systems
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tycon Systems
Model : TP-NCMS412-24
Category : Adapter / Network Card