TP-POE-HP-24G - Adapter / Network Card Tycon Systems - Free user manual and instructions
Find the device manual for free TP-POE-HP-24G Tycon Systems in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | PoE Injector / Network Adapter |
| Model | TP-POE-HP-24G |
| Brand | Tycon Systems |
| Input Voltage | 100-240V AC, 50-60Hz |
| Output Voltage | 24V DC, 0.75A (max) |
| Power over Ethernet Standard | Passive PoE (4-5+ / 7-8- pin pair) |
| Ethernet Data Rate | 10/100/1000 Mbps |
| Connectors | 1x RJ-45 Input, 1x RJ-45 Output (PoE) |
| Dimensions | Approx. 80 x 60 x 30 mm |
| Weight | Approx. 150 g |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, Link/Activity |
| Safety Compliance | CE, RoHS |
| Maintenance | Wipe with dry cloth; avoid liquids |
| Repairability | No user-serviceable parts; contact support |
Frequently Asked Questions - TP-POE-HP-24G Tycon Systems
What is the TP-POE-HP-24G used for?
The TP-POE-HP-24G is a passive PoE injector that provides power and data over a single Ethernet cable to compatible devices such as IP cameras, access points, or VoIP phones.
What is the maximum power output of this injector?
It delivers 24V DC at 0.75A, providing up to 18 watts of power.
Does it support Gigabit Ethernet?
Yes, the TP-POE-HP-24G supports 10/100/1000 Mbps data rates.
Is this a standard PoE injector?
No, it is a passive PoE injector, meaning it does not negotiate power with the powered device. Ensure your device requires 24V passive PoE.
How do I install the TP-POE-HP-24G?
Connect the Ethernet cable from your network switch or router to the Input port, then connect a cable from the Output (PoE) port to your powered device. Plug in the power adapter.
What LED indicators are there?
The injector has a Power LED (green) and a Link/Activity LED (orange) to indicate connection status.
Can I use this injector outdoors?
It is designed for indoor use only. For outdoor installations, use a weatherproof enclosure.
What devices are compatible with this injector?
Devices that accept 24V passive PoE on pins 4-5 (positive) and 7-8 (negative) are compatible. Check your device's specifications.
Does the injector require a special cable?
Standard Cat5e or Cat6 Ethernet cable is sufficient. The injector uses unused wire pairs for power.
How to clean and maintain the injector?
Disconnect power before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquids or solvents.
User questions about TP-POE-HP-24G Tycon Systems
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Adapter / Network Card in PDF format for free! Find your manual TP-POE-HP-24G - Tycon Systems and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TP-POE-HP-24G by Tycon Systems.
USER MANUAL TP-POE-HP-24G Tycon Systems
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tycon Systems
Model : TP-POE-HP-24G
Category : Adapter / Network Card