25365 - Lawn mower Craftsman - Free user manual and instructions
Find the device manual for free 25365 Craftsman in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Walk-Behind Lawn Mower |
| Engine | 140cc Briggs & Stratton, 4-Stroke |
| Cutting Width | 21 inches (53 cm) |
| Cutting Height Adjustment | 6 positions, 1.25 - 3.75 inches |
| Deck Material | Stamped Steel |
| Grass Bag Capacity | 2.5 bushels (approx. 70 liters) |
| Start Type | Recoil (pull start) |
| Fuel Type | Unleaded gasoline (standard) |
| Weight (empty) | 65 lbs (29.5 kg) |
| Dimensions (L x W x H) | 58 x 21.5 x 38 inches |
| Wheel Size | 8 inches front / 10 inches rear |
| Handle Type | Foldable, adjustable height |
| Discharge Options | Mulching, bagging, side discharge |
| Drive Type | Push (manual) or optional self-propelled? This model is push-only. |
| Warranty | 2 years limited warranty |
| Safety Features | Blade brake clutch, operator presence control |
| Maintenance | Oil change every 25 hours, air filter cleaning every 10 hours |
| Repair Information | Spare parts available from Craftsman dealers or online |
Frequently Asked Questions - 25365 Craftsman
How do I start the Craftsman 25365 mower?
Ensure the fuel tank has fresh gasoline and the oil level is correct. Push the primer bulb 3 times, set the throttle to 'Start', and pull the starter rope firmly.
What type of oil should I use?
Use SAE 30 motor oil for temperatures above 40°F, or 10W-30 for a wider temperature range. Check the dipstick regularly.
How often should I change the oil?
Change the oil after the first 5 hours of use, then every 25 hours or once a season, whichever comes first.
How do I adjust the cutting height?
Use the height adjustment lever on each wheel. There are 6 positions. Move all four levers to the same setting for an even cut.
How do I remove the blade for sharpening?
Disconnect the spark plug. Tip the mower on its side (air filter up). Remove the bolt holding the blade with a wrench. Wear gloves. Sharpen or replace the blade.
Why is the mower leaving uncut strips of grass?
Check if the blade is dull, the cutting deck is clogged, or you are mowing too fast. Also ensure the blade is balanced and installed correctly.
How do I clean the cutting deck?
After each use, disconnect the spark plug and tip the mower. Use a putty knife or water jet to remove grass buildup. Do not use a pressure washer.
What is the recommended blade torque?
Tighten the blade bolt to 45-55 ft-lbs (61-75 Nm). Use a torque wrench to prevent damage.
How do I store the mower for winter?
Drain the fuel or add a fuel stabilizer. Change the oil. Clean the deck. Remove the battery if applicable. Store in a dry place.
Where can I find replacement parts for model 25365?
Parts are available at Craftsman dealers, online retailers, or through the official Craftsman website using the model number.
User questions about 25365 Craftsman
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lawn mower in PDF format for free! Find your manual 25365 - Craftsman and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 25365 by Craftsman.