WorkCentre 5019 - Printer XEROX - Free user manual and instructions
Find the device manual for free WorkCentre 5019 XEROX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multifunction Monochrome Laser Printer |
| Functions | Print, Copy, Scan |
| Print Technology | Laser |
| Print Resolution | 2400 x 600 dpi |
| Print Speed | Up to 20 ppm |
| Paper Capacity | 250-sheet input tray, 50-sheet bypass |
| Paper Output | 150-sheet face-down output tray |
| Media Sizes | A4, A5, B5, Letter, Legal, Executive |
| Duplex Printing | Manual (optional automatic) |
| Copy Resolution | Up to 600 x 600 dpi |
| Scan Resolution | Up to 1200 x 1200 dpi |
| Processor | 300 MHz |
| Memory | 128 MB (max 256 MB) |
| Connectivity | USB 2.0, Ethernet 10/100Base-TX |
| Operating Systems | Windows, Mac, Linux |
| Dimensions (W x D x H) | 540 x 460 x 400 mm |
| Weight | 25 kg |
| Power Requirements | 220-240 V AC, 50/60 Hz |
| Power Consumption | Average 400 W, Sleep < 10 W |
| Noise Level | Less than 50 dB (printing) |
| Maintenance | Clean glass and rollers regularly; replace toner and drum as needed |
| Safety | Use only approved power cord; avoid liquids; unplug before cleaning |
| Spare Parts | Toner cartridge (Xerox 106R04389), Drum unit, Fuser unit |
| General Info | Warm-up time: less than 20 seconds; First print out: less than 10 seconds |
Frequently Asked Questions - WorkCentre 5019 XEROX
How do I replace the toner cartridge in my Xerox WorkCentre 5019?
Open the front cover, pull out the old toner cartridge, remove the orange tape from the new cartridge, insert it into the machine, and close the cover. The printer will automatically reset.
How do I clear a paper jam?
Open the front and rear covers, remove any jammed paper gently by pulling it in the direction of paper path. Check the paper trays and fuser area. Close all covers to resume printing.
How do I connect the printer to a network?
Use an Ethernet cable to connect the printer to your router. The printer will automatically obtain an IP address. Install the driver and select the network connection type during setup.
What type of paper can I use?
The printer supports plain paper, recycled paper, and transparency film in sizes A4, A5, B5, Letter, Legal, Executive, with a weight range of 60-163 g/m².
How do I perform a factory reset?
Press the Menu button on the control panel, navigate to System Settings > Maintenance > Factory Defaults, and confirm. The printer will restart.
How do I print a configuration page?
Press the Menu button, go to Information > Print Reports > Configuration Page, then press Start. The page will print.
My printer is not printing; what should I check?
Ensure the printer is turned on and the power cord is connected. Check the USB/Ethernet connection. Look for error messages on the display. Verify the toner is not empty and there is no paper jam.
How do I clean the scan glass?
Use a soft lint-free cloth slightly dampened with water or a glass cleaner. Gently wipe the glass and the white document cover. Do not use abrasive materials.
What is the maximum paper output capacity?
The standard output tray holds up to 150 sheets of 80 g/m² paper. The output tray is face-down.
How do I change the device language?
Press Menu on the control panel, navigate to System Settings > Language, select your desired language, and press OK.
User questions about WorkCentre 5019 XEROX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual WorkCentre 5019 - XEROX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WorkCentre 5019 by XEROX.