Aria EH-A9024ST(SS) - Range hood Elba - Free user manual and instructions

Product Type	Range Hood
Brand	Elba
Model	Aria EH-A9024ST(SS)
Width	90 cm (900 mm)
Depth	50 cm (500 mm)
Height	Adjustable from 600 to 1000 mm
Weight	Approx. 15 kg
Power Supply	220-240 V ~ 50 Hz
Motor Power	200 W
Extraction Capacity	650 m³/h
Noise Level	65 dB (max speed)
Number of Speeds	3
Control Type	Electronic push buttons
Lighting	LED, 2 x 3 W
Filter Type	Aluminum grease filter, washable
Duct Diameter	150 mm
Installation	Wall-mounted or under cabinet
Material	Stainless steel
Warranty	2 years

Frequently Asked Questions - Aria EH-A9024ST(SS) Elba

How do I clean the grease filter?

Remove the aluminum grease filter and wash it with warm soapy water or in the dishwasher. Ensure it is completely dry before reinstalling.

Can I use the hood without ducting?

Yes, this hood can be used in recirculation mode with a charcoal filter (not included). Install the charcoal filter as per the manual.

What should I do if the hood is not extracting properly?

Check if the grease filter is clogged, the duct is blocked, or the motor speed is too low. Clean or replace filters and ensure duct is clear.

How do I change the LED lights?

LED lights are integrated and not user-serviceable. Contact an authorized service center for replacement.

Is a charcoal filter included?

No, the charcoal filter for recirculation mode is sold separately. Purchase model specific to your hood.

What is the recommended maintenance schedule?

Clean the grease filter every month or more often with heavy use. Replace charcoal filter every 3-6 months.

Can I install the hood myself?

Installation requires electrical and mechanical skills. It is recommended to hire a qualified professional to ensure safety and proper functioning.

Why is the hood making noise?

Noise can be due to loose parts, unbalanced fan, or clogged filter. Tighten screws, clean filter, and check for obstructions.

What does the warranty cover?

The warranty covers manufacturing defects for 2 years from purchase. It does not cover damage from improper use or normal wear.

How do I reset the filter alarm?

After cleaning or replacing filters, press and hold the filter alarm button (usually the light or speed button marked with a filter icon) for 3 seconds until the indicator turns off.

USER MANUAL Aria EH-A9024ST(SS) Elba

3D rendering of a gray rectangular object mounted on a base with a small sphere at the base (no text or symbols visible)

ELBA

DESIGNER HOOD

MODEL:ARIA EH-A9024ST(SS)

Owner's Manual

Please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the set and quote this information to your dealer when you require service.

Please read this instruction carefully. It is advisable to keep this instruction manual in a safe place for future reference.

SAFETY PRECAUTIONS

1. Keep electrical appliances out of reach from children. Do not let them to operate the appliances without supervision.
2. To protect against the risk of electrical shock, do not immerse the product, cord or plug into water or any other liquid.
3. This product is for household and indoor use only.
4. This product is not intended for use by person (including children) with reduced physical, sensory or mental capabilities unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
5. If the power cord or plug in damaged, it must be replaced by the service centre or a qualified service technician to avoid hazard.
6. Before installation, check if the mains supply voltage is matched with the voltage stated on the rating plate at the back of the hood.
7. There must be adequate air ventilation of the room when the cooker hood is used with the cooking appliances with burning gas or other fuels.
8. Ensure that the installation of exhaust complies with the standard of local building, gas and electrical authorities.
9. Do not ignite flames in the pans.
10. There is a risk of fire if cleaning is not carried out in accordance with this instruction.

PRODUCT DESCRIPTION

1. On/Off Button-To switch the cooker hood in standby mode and turn off the cooker hood.

2. Fan Delay Off Function – Press this button to schedule a delay to turn off the cooker hood.

3. LED Light Illumination – To switch on/off the LED light.

4. Normal Fan Speed – Press this button to activate normal fan speed.

5. High Fan Speed – Press this button to activate high fan speed.

OPERATING INSTRUCTIONS

1. Press the ⏻ button and press the ⚙ button to operate the cooker hood in normal speed. Press the ⚙ button to operate the cooker hood in high speed.

2. When the motor is running, press ⏻ button to turn off the cooker hood. (This function does not relate to the LED illumination)

3. Press the ⚡ button to turn on the LED light of the cooker hood. Press again to turn off. (This function does not relate to the cooker hood motor)

ASSEMBLY INSTRUCTIONS

Please check the following before installation:

• Installation of hood must be carried out by an authorized or qualified technician.
• For optimum air extraction, avoid having too many windows surrounding the cooker hood which will cause air convection.
• Make sure the hood is in level after installation to avoid oil spill over from the oil cup collectors.
• The optimum height for the installation is between 300 to 350mm which measure from the bottom of the hood to the top of the hob.

1) Before installing, determine the height between the bottom of the cooker hood to the top of the hob.

2) Mark the wall to suit all bracket locations.

3) Drill 4 holes with diameter of ∅10mm and 60mm deep. Insert the screw anchors into the holes. Tighten the screw with the mounting bracket.

4) Hang the hood on the mounting bracket and make sure the hood is in level.

5) Fix the exhaust ducting on the hood with the screws provided.

6) Install the telescopic exhaust cover to the height required.

7) Install the oil cups on the cooker hood.

8) Before connecting to the mains supply, ensure that the mains voltage corresponds to the voltage on the rating plate inside the cooker hood.

CLEANING AND MAINTENANCE

• The hood must always be disconnected from the electricity supply before carrying out the maintenance.
• Clean the hood with damp cloth with hot water and mild detergent. Do not use chemical, steel, wooden or abrasive cleaners to clean the hood.
• Clean the oil cups when they are more than half filled to avoid the oil from spilling.
• Remove the filter, wash in hot soapy water, dry and fit back into the hood. Do not use the hood without the filter installed.

MAIN SPECIFICATION

Rated Voltage : 220-240V/50Hz

Light : 2W x 2

Suction Power : 1,200m³/hr

Motor Power : 220W

Product Dimension: 895mm(W) x 607-1002mm(H) x 515mm(D)

NOTICE

This product must not be disposed together with domestic waste. It has to be disposed at an authorized place for recycling of electrical and electronic appliances. By collecting and recycling waste, you help to save natural resources and make sure the product is disposed in an environmental friendly and healthy way.

Symbol of a trash bin with no text or labels

ELBA