Elegante EH-B9025ST(SS) - Range hood Elba - Free user manual and instructions

Product Type	Range Hood
Brand	Elba
Model	Elegante EH-B9025ST(SS)
Dimensions (W x H x D)	900 mm x 595-995 mm x 515 mm
Rated Voltage	220-240 V / 50 Hz
Motor Power	240 W
Suction Power	1300 m³/h
LED Light	2 W x 2
Fan Speeds	Normal and High
Delay Off Function	1 minute delay
Installation Height	650-750 mm from bottom of hood to top of hob
Material	Stainless Steel
Control Type	Button control
Exhaust Duct	Telescopic cover included
Oil Cups	Removable, washable
Cleaning Method	Damp cloth with mild detergent; avoid abrasive cleaners
Safety Features	Child safety, electrical shock protection
Usage	Indoor household use only

Frequently Asked Questions - Elegante EH-B9025ST(SS) Elba

What is the recommended installation height for the Elba Elegante EH-B9025ST(SS)?

The optimal installation height is between 650 mm and 750 mm from the bottom of the hood to the top of the hob.

How should I clean the range hood?

Use a damp cloth with hot water and mild detergent. Do not use chemical, steel, wooden, or abrasive cleaners.

What fan speeds does this hood offer?

It offers two speeds: Normal and High. Press the respective buttons to select.

How does the delay off function work?

Press the delay off button to schedule a 1-minute delay before the hood turns off automatically.

What type of light does the hood use?

It uses LED lights with a power of 2 W each (total 4 W).

Can the hood be used with gas hobs?

Yes, but ensure adequate ventilation in the room. Follow local gas and building codes.

How do I maintain the oil cups?

Clean the oil cups when they are more than half filled. Wash them in hot soapy water, dry, and reinstall.

Can I install the range hood myself?

Installation should be carried out by an authorized or qualified technician to ensure safety and proper operation.

What is the total power consumption?

The motor consumes 240 W, and the lights add 4 W, for a total of 244 W at maximum.

How should I dispose of this product at the end of its life?

Do not dispose with domestic waste. Take it to an authorized recycling center for electrical and electronic appliances.

USER MANUAL Elegante EH-B9025ST(SS) Elba

Exterior view of a Elba air conditioner unit (no text or symbols on the structure itself)

ELBA

DESIGNER HOOD

MODEL:ELEGANTE EH-B9025ST(SS)

Owner's Manual

Please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the set and quote this information to your dealer when you require service.

Please read this instruction carefully. It is advisable to keep this instruction manual in a safe place for future reference.

SAFETY PRECAUTIONS

1. Keep electrical appliances out of reach from children. Do not let them to operate the appliances without supervision.
2. To protect against the risk of electrical shock, do not immerse the product, cord or plug into water or any other liquid.
3. This product is for household and indoor use only.
4. This product is not intended for use by person (including children) with reduced physical, sensory or mental capabilities unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
5. If the power cord or plug is damaged, it must be replaced by the service centre or a qualified service technician to avoid hazard.
6. Before installation, check if the mains supply voltage is matched with the voltage stated on the rating plate at the back of the hood.
7. There must be adequate air ventilation of the room when the cooker hood is used with the cooking appliances with burning gas or other fuels.
8. Ensure that the installation of exhaust complies with the standard of local building, gas and electrical authorities.
9. Do not ignite flames in the pans.
10. There is a risk of fire if cleaning is not carried out in accordance with this instruction.

1. On/Off Button-To switch the cooker hood in standby mode and turn off the cooker hood.

2. Fan Delay Off Function – Press this button to schedule one minute delay to turn off the cooker hood.

3. LED Light Illumination – To switch on/off the LED light.

4. Normal Fan Speed – Press this button to operate normal fan speed.

5. High Fan Speed – Press this button to operate high fan speed.

OPERATING INSTRUCTIONS

1. Press the Ⓐ button and press the ⏰ button to operate the cooker hood in normal speed. Press the ⏱ button to operate the cooker hood in high speed.

2. When the motor is running, press Ⓞ button to turn off the cooker hood. (This function does not relate to the LED illumination)

3. Press the ⚙ button to turn on the LED light of the cooker hood. Press again to turn off. (This function does not relate to the cooker hood motor)

ASSEMBLY INSTRUCTIONS

Please check the following before installation:

• Installation of hood must be carried out by an authorized or qualified technician.
- For optimum air extraction, avoid having too many windows surrounding the cooker hood which will cause air convection.
- Make sure the hood is in level after installation to avoid oil spill over from the oil cup collectors.
- The optimum height for the installation is between 650 to 750mm which measure from the bottom of the hood to the top of the hob.

1) Before installing, determine the height between the bottom of the cooker hood to the top of the hob.

2) Mark the wall to suit all bracket locations.

3) Drill 4 holes with diameter of ∅10mm and 60mm deep. Insert the screw anchors into the holes. Tighten the screw with the mounting bracket.

4) Hang the hood on the mounting bracket and make sure the hood is in level.

5) Fix the exhaust ducting on the hood with the screws provided.

6) Install the telescopic exhaust cover to the height required.

7) Install the oil cups on the cooker hood.

8) Before connecting to the mains supply, ensure that the mains voltage corresponds to the voltage on the rating plate inside the cooker hood.

CLEANING AND MAINTENANCE

• The hood must always be disconnected from the electricity supply before carrying out the maintenance.
• Clean the hood with damp cloth with hot water and mild detergent. Do not use chemical, steel, wooden or abrasive cleaners to clean the hood.
• Clean the oil cups when they are more than half filled to avoid the oil from spilling.
• Remove the oil cup, wash in hot soapy water, dry and fit back into the hood. Do not use the hood without the oil cup installed.

MAIN SPECIFICATION

Rated Voltage : 220-240V/50Hz

LED Light : 2W x 2

Suction Power : 1,300m³/hr

Motor Power : 240W

Product Dimension: 900mm(W) x 595-995mm(H) x 515mm(D)

NOTICE

This product must not be disposed together with domestic waste. It has to be disposed at an authorized place for recycling of electrical and electronic appliances. By collecting and recycling waste, you help to save natural resources and make sure the product is disposed in an environmental friendly and healthy way.

Symbol of a trash bin with crossed lines and a black rectangular base (no text or labels)

ELBA