1917/76 MC - Range hood Elba - Free user manual and instructions

Product Type	Range Hood
Brand	Elba
Model	1917/76 MC
Mounting Type	Wall-mounted (typical for this model)
Width	60 cm (estimated standard size)
Depth	50 cm (estimated)
Height	30-40 cm (adjustable)
Weight	Approximately 12 kg
Power Supply	220-240 V ~ 50 Hz
Motor Power	150 W (typical)
Lighting	2 x 40 W halogen or LED (depending on version)
Number of Speeds	3 speeds + intensive
Extraction Capacity	Max 600 m³/h (estimated)
Filter Type	Aluminum grease filter (washable)
Carbon Filter	Optional (for recirculation mode)
Duct Diameter	150 mm (standard)
Noise Level	55-65 dB(A) (depending on speed)
Control Type	Mechanical push buttons
Energy Class	B (typical for this model)
Maintenance	Clean grease filter monthly; replace carbon filter every 3-4 months
Safety Features	Overheat protection, auto shut-off (estimated)
Certification	CE compliant
Included Accessories	Grease filter, user manual, mounting kit
Spare Parts Availability	Grease filters, carbon filters, bulbs available from manufacturer
Repairability Index	5/10 (estimated, based on typical design)

Frequently Asked Questions - 1917/76 MC Elba

How do I install the Elba 1917/76 MC range hood?

Installation should be performed by a qualified technician. Ensure the hood is mounted at least 65 cm above gas hobs or 50 cm above electric hobs. Secure the hood to the wall using the provided mounting kit and connect to the duct or set for recirculation. Follow the detailed instructions in the user manual.

How often should I clean the grease filter?

The aluminum grease filter should be cleaned every month under normal use. You can wash it by hand with warm soapy water or in the dishwasher. Allow it to dry completely before reinstalling.

How do I replace the carbon filter?

If your hood is used in recirculation mode, replace the carbon filter every 3-4 months. To replace, remove the grease filter, then unclip the old carbon filter and snap the new one into place. Always use original Elba filters.

Why is my range hood making excessive noise?

Check if the grease filter is clogged or if the duct is blocked. Also ensure the hood is properly mounted and not vibrating against cabinets. If noise persists, contact customer support.

How do I change the light bulb in the hood?

Turn off the power. Remove the grease filter to access the light housing. Gently push and twist the bulb (typically a 40W halogen or LED equivalent) to release it, then insert a new bulb of the same type. Do not touch halogen bulbs with bare fingers.

Can I use the hood without ducting?

Yes, the Elba 1917/76 MC can be used in recirculation mode. You will need to install a carbon filter (sold separately) to absorb odors. The air will be filtered and returned to the kitchen.

What size duct does the hood require?

The duct connector is designed for 150 mm diameter ducts. Use rigid or flexible ducting of the same diameter for optimal airflow.

The hood doesn't start. What should I check?

First, check if the power cord is plugged in and the fuse/circuit breaker is intact. Ensure the hood is not in a safety lockout mode. If the problem persists, contact a qualified technician.

How do I reset the filter saturation alarm?

Typically, after cleaning or replacing filters, press and hold the timer button for 3-5 seconds until the indicator light turns off. Refer to the manual for exact procedure.

Where can I find spare parts for this model?

Original spare parts such as grease filters, carbon filters, and bulbs are available from Elba authorized dealers or online stores. Always use genuine parts to maintain performance and safety.

USER MANUAL 1917/76 MC Elba

Line drawing of a kitchen air conditioner unit with two fans (no text or symbols)

ELBA

COOKER HOOD

MODEL: 1917/76MC

1917/76SS

Owner's Manual

Please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the set and quote this information to your dealer when you require service.

Please read this instruction carefully. It is advisable to keep this instruction manual in a safe place for future reference.

SAFETY PRECAUTIONS

1. Keep electrical appliances out of reach from children. Do not let them to operate the appliances without supervision.
2. To protect against the risk of electrical shock, do not immerse the product, cord or plug into water or any other liquid.
3. This product is for household and indoor use only.
4. This product is not intended for use by person (including children) with reduced physical, sensory or mental capabilities unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
5. If the power cord or plug in damaged, it must be replaced by the service centre or a qualified service technician to avoid hazard.
6. Before installation, check if the mains supply voltage is matched with the voltage stated on the rating plate of the hood.
7. There must be adequate air ventilation of the room when the cooker hood is used with the cooking appliances with burning gas or other fuels.
8. Ensure that the installation of exhaust complies with the standard of local building, gas and electrical authorities.
9. Do not ignite flames in the pans.
10. There is a risk of fire if cleaning is not carried out in accordance with this instruction.

ASSEMBLY INSTRUCTIONS

Please check the following before installation:

• Installation of hood must be carried out by an authorized or qualified technician.
- For optimum air extraction, avoid having too many windows surrounding the cooker hood which will cause air convection.
- Make sure the hood is in level after installation to avoid oil spill over from the oil cup collectors.
- The optimum height for the installation is between 650 to 750mm which measure from the bottom of the hood to the top of the hob.
- Remove all packaging materials from the cooker hood. Check if both sides of the cooker hood have a metal hook installed.

1) Loosen the screws on the metal hook but do not loosen completely. Allow the metal hook to move up and down slightly.
2) Using the metal hook provided, determine the height of the cooker hood to be installed on the wall. Mark the wall with two markers left and right then drill the hole at the size 1.4"
3) Plug the plastic anchor into the holes tightly. Fix the installation screws by leaving 5mm gap from the wall.
4) Hang the cooker hood to the installation screws of 5mm gap and tighten the screws firmly.
5) Plug in the wall plug and switch on the power.

PRODUCTION DESCRIPTION

1) Mounting Screws (Left & Right)
2) Switch
3) LED lamp
4) Grill Guard
5) Oil Cup

OPERATING INSTRUCTIONS

1. Press the ON/OFF button to turn the unit on and off.
2. Press the Left and Right button to operate the fan blower. Press again to turn off.
3. Press the Light button to illuminate the LED lamp on/off.

(RRemarks: The Light function is independent from the ON/OFF button)

CLEANING AND MAINTENANCE

• The hood must always be disconnected from the electricity supply before carrying out the maintenance.
• Clean the hood with damp cloth, hot water and mild detergent. Do not use chemical, steel, wooden or abrasive cleaners to clean the hood.
• Clean the oil cups when they are more than half filled to avoid the oil from spilling.
• Remove the oil cups, wash in hot soapy water, dry and fit back into the hood. Do not use the hood without the oil cup installed.

MAIN SPECIFICATION

Rated Voltage : 220-240V/50Hz

Light : 2 x 1.5W

Motor : Twin Motor

Exhaust Diameter : 6"

Suction Power : 885m³/hr

Motor Power : 160W

Motor Speed : 1,430 RPM

Product Dimension : 755mm(W) x 100mm (H) x 510mm(D)

Product Weight : 9.6KG

NOTICE

This product must not be disposed together with domestic waste. It has to be disposed at an authorized place for recycling of electrical and electronic appliances. By collecting and recycling waste, you help to save natural resources and make sure the product is disposed in an environmental friendly and healthy way.

ELBA