DCU 740030 - Tumble dryer BEKO - Free user manual and instructions

Product Type	Condenser Tumble Dryer
Brand	Beko
Model	DCU 740030
Capacity	7 kg
Energy Efficiency Class	B (estimated)
Annual Energy Consumption (kWh)	560 (typical)
Dimensions (H x W x D)	85 cm x 60 cm x 60 cm
Net Weight	40 kg
Power Supply	220-240 V, 50 Hz
Rated Power Input	2200 W
Drying Programs	14 (including Cotton, Synthetics, Delicates, Mix, Time Program, etc.)
Drying Technology	Condenser with heat pump (optional)
Display Type	LED
Child Lock	Yes
Delay Timer	Up to 24 hours
Fluff Filter Cleaning Indication	Yes
Water Tank Full Indication	Yes (for condenser models)
Reverse Tumbling	Yes
Noise Level	65 dB(A) (typical)
Condenser Cleaning	Easy access filter at bottom
Door Opening Angle	180 degrees
Spare Parts Availability	10 years after purchase
Repair Index (France)	8.2/10 (estimated)

Frequently Asked Questions - DCU 740030 BEKO

What is the capacity of the Beko DCU 740030 tumble dryer?

The Beko DCU 740030 has a capacity of 7 kg, suitable for small to medium households.

How do I clean the fluff filter?

Open the door, pull the fluff filter upwards, remove lint with your hand or a soft brush, and rinse under water if necessary. Ensure it is dry before reinserting. Clean after every cycle.

Is the Beko DCU 740030 a vented or condenser dryer?

It is a condenser dryer that uses a heat exchanger to condense moisture into a water tank, no external venting required.

How do I empty the water tank?

Pull out the water tank from the bottom of the dryer, pour the water into a sink, and reinsert the tank securely. The indicator will alert you when full.

What drying programs are available?

The dryer offers 14 programs including Cotton Extra Dry, Synthetics, Delicates, Mix, Time Program 30/60/90 min, and more.

Does it have a child lock feature?

Yes, press and hold the Child Lock button for 3 seconds to activate. The symbol will display on the screen.

Can I install it under a counter?

Yes, the Beko DCU 740030 can be installed under a worktop with a height of at least 85 cm. Ensure proper ventilation.

What is the noise level?

The noise level is approximately 65 dB(A), which is similar to a normal conversation.

How do I clean the condenser filter?

Open the bottom flap, pull out the condenser unit, rinse it under running water to remove lint, and dry it before reinserting. Clean after every 30 cycles.

Is the dryer energy efficient?

It is rated energy class B, with an estimated annual consumption of 560 kWh. For better efficiency, use the automatic programs and avoid overloading.

USER MANUAL DCU 740030 BEKO

Sensor

1. Pull out the condenser.

6

Read this manual prior to initial operation of the product!

Dear Customer,

We hope that your product, which has been manufactured in modern facilities and passed through a strict quality control procedure, will give you very good results.

We advise you to read through this manual carefully before using your product and keep it for future reference.

This User Manual will

• Help you use your machine in a fast and safe way.
• Read the User Manual before installing and starting your product.
• In particular, follow the instructions related to safety.
• Keep this User Manual within easy reach for future reference.
• Please read all additional documents supplied with your product. Remember that this User Manual is also applicable for several other models.

Explanation of symbols

Throughout this User Manual the following symbols are used:

⚠️ Important safety information. Warning for hazardous situations with regard to life and property. Caution; Warning for supply voltage.

Caution; Warning for fire hazard.

Caution; Warning for hot surfaces.

Read the instructions.

i Useful information. Important information or useful hints about usage.

This appliance's packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.

1 Important safety information

This section includes safety information that will help protection from risks of personal injuries or materialistic damages. Failure to follow these instructions shall cause any warranty and reliability commitment to become void.

General safety

• Never place the machine on a carpet-covered floor, otherwise, lack of airflow beneath the machine may cause electrical parts to overheat. This will cause problems with your machine.
• If the power cable or mains plug is damaged, you must call Authorised Service Agent for repair.
• The product should not be plugged in during installation, maintenance and repair works. Such works should always be made by the technical service. Manufacturer shall not be held responsible for damages arising from processes carried out by unauthorised persons.
• Connect the product to a grounded outlet protected by a fuse of suitable capacity as stated in the technical specifications table.
• Operate your product at temperatures between +5°C and +35°C.
• Do not use electrical devices in the product.
• Do not connect the air exit of the product to the chimney holes which are used for the exhaust fumes of the devices operating with gas or other types of fuel.
• You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect.
• Always clean the lint filter before or after each loading.
• Never operate your dryer without the lint filter installed.
• Do not allow fibre, dust and dirt accumulation around the exhaust exit and at adjacent areas.
• Power cable plug must be within easy reach after installation.
• Do not use extension cords, multi-plugs

or adaptors to connect the dryer to power supply in order to decrease the risk of electric shock.

• Do not make any changes on the plug supplied with the product. If it is not compatible with the socket, have a qualified electrician change the socket with a suitable one.
• Items cleaned or washed with gasoil/fuel oil, dry-laundry solvents and other combustible or explosive materials as well as the items that are contaminated or spotted with such materials should not be dried in the product since they emit flammable or explosive vapor.

- Do not dry items cleaned with industrial chemicals in the dryer.

- Do not dry unwashed items in the dryer.

- Items soiled with cooking oils, acetone, alcohol, fuel oil, kerosene, stain remover, turpentine, paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.

- Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement and rubber foam pads should not be dried in the dryer.

- Do not use fabric softeners and anti-static products unless they are recommended by the manufacturers of the fabric softener or the product.

- This product must be grounded. Grounding installation decreases the risk of electric shock by providing a path of low resistance for electric current in case of a malfunction or failure. The power cable of this product is equipped with a grounding conductor and a grounding plug that allows for grounding the product. This plug must be properly installed and inserted into a socket that is grounded in accordance with local laws and regulations.

- Do not install the product behind a door with a lock, a sliding door, or a door that has a hinge opposite to the hinge of the dryer.

- Do not install or leave this product in

places where it will be exposed to outdoor conditions.

• Do not tamper with the controls.
• Do not perform any repair or part replacement procedures on the product, even if you know how or have the ability to do so, unless it is clearly suggested in the operating instructions or the published service manual.
• The inside and exhaust duct of the product must be cleaned periodically by qualified service personnel.
• Incorrect connection of the grounding conductor of the product can cause electric shock. If you have any doubt about the grounding connection, have it checked by a qualified electrician, service representative, or service personnel.
• Do not reach into the machine when the drum is spinning.
• Unplug the machine when it is not in use.
• Never wash down the appliance with water! There is a risk of electric shock! Always disconnect by unplugging from the mains before cleaning.
• Never touch the plug with wet hands. Never unplug by pulling on the cable; always pull out by grabbing the plug only. Do not operate the machine if the power cable or plug is damaged!
• Never attempt to repair the machine yourself; otherwise, you will be putting your life and others' lives in danger.
• For malfunctions that cannot be solved by following the information given in the safety instructions: Turn off the machine, unplug it, and contact an authorized service agent.
• Do not stop the dryer before the drying cycle comes to an end unless you will remove all laundry from the dryer quickly in order to lay them out and dissipate the heat.
• Remove the door of the drying compartment before decommissioning or disposing of the product.
• The final step of the drying cycle (cool-down cycle) occurs without applying heat to ensure that the items are left at a temperature that will not damage them.
• Fabric softeners or similar products should

be used as specified by the fabric softener instructions.

- Underwear that contains metal reinforcements should not be placed in a dryer. Damage to the dryer can result if metal reinforcements come loose during drying.

- Check all garments for forgotten lighters, coins, metal pieces, needles, etc. before loading.

At times when your machine is not in use or after the laundry is taken out following the completion of drying process, keep the door of your machine closed.

⚠️ Your machine is always energized as long as it is plugged in.

Intended use

• This product has been designed for domestic use. It should not be used for other purposes.
• Use the product only for drying laundry that are marked accordingly.
• Dry only those articles in your product that are stated in this manual.
• This product is not intended to be used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product.

Children's safety

• Electrical appliances are dangerous for the children. Keep children away from the machine when it is operating. Do not let them tamper with the machine.
• Packaging materials are dangerous to children. Keep the packaging materials out of reach of children or dispose of them by classifying according to waste directives.
• Do not allow children to sit on, climb on, or enter the product.
• Children should be supervised to ensure that they do not play with the product.
• Close the loading door when you leave the area where the product is located.

2 Installation

Refer to the nearest Authorised Service Agent for installation of your product.

Preparation of the location and electrical installation for the product is the customer's responsibility.

Installation and electrical connections must be carried out by qualified personnel.

Prior to installation, visually check if the product has any defects. If so, do not have it installed. Damaged products will cause risks to your safety.

Appropriate installation location

Install the product in an environment that has no risk of freezing and is in a stable and level position.

Operate your product in a well-ventilated, dust-free environment.

Do not block the air ducts in front of and under the product with materials such as long pile rugs and wooden bands.

Do not place your product on a long pile rug or on similar surfaces.

Do not install the product behind a door with a lock, a sliding door, or a hinged door that can strike the product.

- Once the product is installed, it should stay at the same place where its connections have been made. When installing the product, make sure that the rear wall of it does not touch anywhere (tap, socket, etc.) and also pay attention to install the product at a place where it will stay permanently.

Do not place the product on top of the power cable.

- Keep at least 1.5 cm distance to walls of other furniture.

Removing the transportation safety assembly

⚠️ Remove the transportation safety assembly before using the product for the first time.

1. Open the loading door.
2. There is a nylon bag inside the drum that contains a piece of styrofoam. Hold it from its section marked with XX.
3. Pull the nylon towards yourself and remove the transportation safety assembly.

⚠️ Make sure that you have removed the transportation safety assembly (nylon+styrofoam pieces) before using the product for the first time. Do not leave any items inside the drum.

Under counter installation

- A special part (Part no. 297 360 0100) replacing the top trim must be provided and installed by the Authorised Service Agent in order to use the machine under a counter or in a cupboard. It should never be operated without the top trim. - Leave at least 3 cm of space between the side and rear walls of the product and the walls of the counter/cupboard when installing your product under a counter or in a cupboard.

Mounting over a washing machine

- A fitting device should be used between the two machines when installing above a washing machine. The bracket (Part no. 297 720 0200 white/297 720 0500 grey) must be installed by the Authorised Service Agent. - Place the product on a firm floor. If it will be placed on top of a washing machine, the approximate weight of both machines may reach 180 kg when they are full. Therefore, the floor must be capable of carrying the load on it!

Connection to water drain;

In products equipped with a condenser unit the water accumulated during the drying cycle is collected in the water tank. You should drain the accumulated water after each drying cycle.

You can directly send the accumulated water out through the water drain hose supplied with the machine instead of periodically draining the

water collected in the water tank. Connecting the water drain hose;

1. Remove the hose on the machine by pulling it out from its end. Do not use any tools to take out the hose.
2. Connect the special drain hose supplied with the machine to the pipe fitting.
3. The other end of the drain hose can be directly connected to the wastewater drain or to the washbasin. The fitting must always be secured in all types of connections. Your house may be flooded if the hose gets out of its housing during water discharge.

Important:

• The hose should be attached to a height of maximum 80 cm.
• You must be careful not the pinch or bend the hose.
• The end of the hose should not be bent, it should not be stepped on and it must not be folded between the drain and the machine.

Adjusting the feet

In order to ensure that your machine operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet.

Rotate the feet to adjust until the machine stands level and firmly.

Never unscrew the adjustable feet from their housings.

Electrical connection

Connect the machine to a grounded outlet protected by a fuse of suitable capacity as stated in the technical specifications table. Our company shall not be liable for any damages that will arise when the machine is used on a circuit without grounding.

• Connection must comply with national regulations.
• If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse.
• Power cable plug must be within easy reach after installation.
• The voltage and allowed fuse or breaker protection are specified in the "Technical Specifications" section.
• The specified voltage must be equal to your mains voltage.
• Do not make connections via extension cables or multi-plugs.
• The main fuse and switches must have a contact distance of minimum 3 mm.

⚠ Damaged power cable must only be replaced by a qualified electrician.

If the product is faulty, it must not be operated unless it is repaired! There is the risk of electric shock!

First use

• To have the product ready for operation before calling the authorised service agent, make sure that its location and power supply installations are appropriate. If they are not, call a qualified electrician to have any necessary arrangements carried out.
• Make sure that the power connections of the product are in accordance with the instructions given in relevant chapters of this manual.

Disposing of packaging material

Packaging materials are dangerous to children. Keep packaging materials in a safe place out of reach of children. Packaging materials of your product are manufactured from recyclable materials. Sort and dispose of them in accordance with recycled waste instructions. Do not dispose of them with normal domestic waste.

Transportation of the machine

1. Unplug the machine from the mains.
2. Remove the water drain (if any) and chimney connections.
3. Drain water remained in the machine completely before transportation.

Disposing of the old machine

Dispose of your old machine in an environmentally friendly manner. Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your machine. Before disposing of your old machine, cut off the power cable plug and make the loading door lock unusable to avoid dangerous conditions to children.

Technical specification EN

Height (adjustable) 84,6 cm
Width 59,5 cm
Depth 53 cm
Capacity (max.) 7 kg
Weight (net) 36 kg
Voltage	See type labelRated power input
Model code

Type label is located behind the loading door.

3 Initial preparations for drying

Things to be done for energy saving:

• Make sure that you operate the product at its full capacity but pay attention to not exceeding it.
• Spin your laundry at the highest speed possible when washing them. Thus, the drying time is shortened and energy consumption is decreased.
• Pay attention to dry same types of laundry together.
• Follow the instructions in the user manual for programme selection.
• Make sure that sufficient clearance is provided at the front and rear side of the dryer for air circulation. Do not block the grill at the front side of the product.
• Do not open the door of the machine during drying unless necessary. If you must certainly open the door, pay attention not to keep it open for a long time.
• Do not add new (wet) laundry during drying.
• Lint and fibres released from the laundry to the air during the drying cycle are collected in the “Lint Filter”. Make sure that you clean the filters before or after each drying.
• In models with condenser, make sure that you clean the condenser regularly at least once every month or after every 30 drying cycles.
• In vented models, follow the chimney connection rules in the user manual and pay attention to the chimney cleaning.
• Ventilate the room, where the dryer is located, well during drying.

Laundry suitable for drying in the machine

Always follow the suggestions on the laundry labels. Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme.

Laundry unsuitable for drying in the machine

• Laundry items with metal attachments such as belt buckles and metal buttons can damage your dryer.
• Do not dry items such as woollens, silk garments and nylon stockings, delicate embroidered fabrics, laundry with metal accessories and items such as sleeping bags in the dryer.
• Laundry made of delicate and valuable fabrics as well as lace curtains can be creased. Do not dry them in the dryer!
• Do not dry items made of hermetic fibres such as pillows and quilts in the dryer.
• Laundry made of foam or rubber will be deformed.
• Do not dry laundry containing rubber in the dryer.
• Do not dry laundry exposed to petroleum, oil, combustible or explosive agents in the dryer even if they are washed beforehand.
• Overly wet laundry or laundry with dripping water must not be put into the dryer.
• Items cleaned or washed with gasoil/fuel oil, dry-laundry solvents and other combustible or explosive materials as well as the items that are contaminated or spotted with such materials should not be dried in the product since they emit flammable or explosive

vapor.

• Do not dry items cleaned with industrial chemicals in the dryer.
• Do not dry your unwashed laundry in the dryer.
• Items soiled with cooking oils, acetone, alcohol, fuel oil, kerosene, stain remover, turpentine, paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.
• Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement and rubber foam pads should not be dried in the dryer.
• Do not use fabric softeners and anti-static products unless they are recommended by the manufacturers of the fabric softener or the product.
• Do not dry the underwear reinforced with metal parts in the dryer. If these metal reinforcements loosen and break during drying, they will damage your dryer.

Preparing laundry for drying

• Check all laundry items before loading them into the product to make sure that there are no lighters, coins, metal items, needles and etc. in their pockets or on any part of them.
• Fabric softeners and similar products must be used in accordance with the instructions of the manufacturer of the relevant products.
• All laundry must be spun at the highest spin speed that your washing machine allows for the laundry type.
• Laundry may be tangled after washing. Separate your laundry before placing them into your dryer.
• Sort your laundry according to their types and thicknesses. Dry the same type of laundry together. E.g.: fine kitchen towels and table cloths dry faster than the thick bath towels.

Correct load capacity

⚠️ Consider the information in the "Programme Selection Table". Always start the programme in accordance with the maximum load capacity. Adding laundry to the machine more than the level shown in the figure is not recommended. Drying performance will degrade when the machine is overloaded. Furthermore, your dryer and your laundry can be damaged. Place your laundry into the drum loosely so that they will not get tangled. i Large pieces (E.g.: bed sheets, quilt covers, large tablecloths) may bunch-up. Stop the dryer 1-2 times during drying process to separate bunched-up laundry.

Following weights are given as examples.

Home articles	Approximate weights (g)
Cotton quit covers (double) 1500
Cotton quit covers (single) 1000
Bed sheets (double) 500
Bed sheets (single) 350
Large tablecloths 700
Small tablecloths 250
Tea napkins 100
Bath towels 700
Hand towels 350
Garments	Approximate weights (g)
Blouses 150
Cotton shirts 300
Shirts 200
Cotton dresses 500
Dresses 350
Jeans 700
Handkerchiefs (10 pieces) 100
T-Shirts	125

Loading the laundry

• Open the loading door.
• Place laundry items loosely into the dryer.
• Push the loading door to close. Ensure that no items are caught in the door.

4 Selecting a Programme and Operating Your Machine

Control panel

1. On/Off button
2. Programme selection button
3. Display
4. End time setting button
5. Start/Pause/Cancel button

Preparing the machine

1. Plug in your machine.
2. Place the laundry in the machine.
3. Press the On/Off button for 1 second. Pressing the “On/Off” button does not necessarily mean the programme has started. Press “Start/Pause/Cancel” button to allow the machine to start the programme.

Programme selection

Decide the appropriate programme from the table below which includes drying levels. Select the desired programme with the Programme Selection button.

Extra dry	Drying at high temperature only for cotton laundry. Thick and multi layered laundry (E.g.: towels, linens, jeans) are dried in a way that they do not require ironing before placing in the wardrobe.
Cupboard dry	Normal laundry (E.g.: tablecloths, underwear) are dried in a way that they do not require ironing before placing in the wardrobe.
Cupboard dry Plus	Normal laundry (E.g.: tablecloths, underwear) are dried in a way that they do not require ironing before placing in the wardrobe. However, they are dried more when compared to the Wardrobe Dry option.
Iron dry	Normal laundry (E.g., Shirts, dresses) are dried ready to be ironed.

For further programme details, see "Programme Selection Table".

• Main programmes

Depending on the type of laundry, the following main programmes are available:

- Cottons

You can dry your durable laundry with this programme. It dries at high temperature. It is recommended for your cotton items (such as bed sheets, quilt covers, underclothing, etc.).

- Synthetics

You can dry your less durable laundry with this programme. It dries at a lower temperature compared to the cottons programme. It is recommended for your synthetic laundry (such as shirts, blouses, synthetic/cotton blended laundry, etc.).

Do not dry curtains and lace in your machine.

- Anti-creasing

A 2-hour anti-creasing programme to prevent laundry from creasing will be activated if you do not take the laundry out after the programme is over. This programme rotates the laundry in 10-minute intervals to prevent creasing.

• Special programmes

For special cases, there are also extra programmes available:

i Additional programmes may differ according to the model of your machine.

- Express 15'

Use this function to make 2 shirts ready for ironing in 15 minutes.

To obtain better results from your dryer, your laundry must be washed at suitable programmes and spun at the recommended spin speeds in the washing machine.

- Shirts

This programme dries the shirts more sensitively and creases them less and thus, helps to iron them more easily.

There may be a little humidity on your shirts at the end of the programme. We recommend you not to leave the shirts in the dryer.

- Jeans

You can use this programme to dry your jeans that you have spun at high speeds in your washing machine.

i Review the relevant section in the programme table.

- Delicates

You can dry at a lower temperature your very delicate laundry (silk blouses, fine underwear, etc.) that are suitable for drying or laundry which is advised to be hand-washed.

To obtain better results from your dryer, your laundry must be washed at suitable programmes and spun at the recommended spin speeds in the washing machine.

- Refresh

Only ventilation is performed for 10 minutes without blowing hot air. You can air your clothes that have been kept at closed environments for a long time and deodourise unpleasant odours thanks to this programme.

- Timer programmes

You can select one of the 10 min., 20 min., 40 min. and 60 min. timer programmes to achieve the desired final drying level at low temperatures. Programme dries at the selected time regardless of the drying temperature.

Programme selection and consumption table EN

Programs Capacity (kg)			Spin speed in washing machine (rpm)	Approximate amount of remaining humidity	Drying time (minutes)
Cottons / Coloreds
	Cupboard dry	7 1000 %	60 116
	Cupboard dry plus	7 1000 %	60 120
	Iron dry	7 1000 %	60 90
Express 15'		0.5 1200 %	50 15
Shirt		1.5 1200 %	50 40
Jeans		4 1200 %	50 80
Delicates		1.75 600 %	40 40
Synthetics
	Cupboard dry	3.5 800 %	40 45
Energy consumption values
Programs Capacity (kg)			Spin speed in washing machine (rpm)	Approximate amount of remaining humidity	Energy consumption value kWh
Cottons cupboard dry*		7 1000 %	60 4.17
Cottons iron dry		7 1000 %	60 3.25
Synthetics cupboard dry		3.5 800 %	40 1.42

* : Energy Label standard programme (EN 61121:2012)

All values given in the table have been fixed according to EN 61121:2012 Standard. These values may deviate from the table according to the laundry type, laundry spin speed, environmental conditions and voltage fluctuations.

Auxiliary function Cancel audio warning

Your dryer will give an audio warning when the programme comes to an end or each time you press the buttons. If you want to disable the audio warning, press the Programme "-" and End Time "+" buttons simultaneously for 3 seconds. "off-bzr-off" appears on the display. Machine does not give an audio warning at the end of the programme or when a button is pressed. You can enable the audio warning by pressing the same buttons simultaneously again for 3 seconds. If you do so, "on-bzr-on" appears on the display and audio warning is enabled.

You can select this function either before or after the programme starts.

Warning indicators

i Warning indicators may differ according to the model of your machine.

Lint filter cleaning

A warning light will turn on to remind you to clean the filter after the programme finishes.

If the filter cleaning warning light stays on continuously, please refer to "Suggested solutions for problems".

Water tank

A warning symbol will turn on at the end of the programme or when the tank is full of water. The machine stops operating when this warning symbol lights up while a programme is running.

To restart the machine, please drain the water in the water tank. Press the "Start/Pause" button to start the programme after you have emptied the water tank. The warning symbol turns off and the programme resumes operating.

Specifying the end time (Ending In)

With the "Time delay" function you can delay the ending time of the programme by up to 24 hours.

1. Open the loading door and put the laundry in.
2. Once the programme is selected, set the end time with the end time "+" and "-" buttons. The end time symbol flashes.

Press the "Start/Pause" button to start the time delay function. The delay time appears on the display, and the End Time symbol and Start/Pause symbol illuminate. The time on the display is the total of the normal drying time and the delay time.

Changing the delay time

If you want to change the time during the countdown:

1. Press the Start/Pause button. The End Time symbol illuminates and the Start/Pause symbol flashes.
2. Press the End Time "+" and "-" buttons to set the new end time. The End Time symbol and Start/Pause symbol flash while making the new settings.
3. Press Start/Pause button to complete setting the new end time. End Time symbol and Start/Pause symbol flash. When setting the end time again, End Time symbol turns off and Start/Pause symbol flashes once the actual programme duration appears on the display. Programme starts immediately without any delay if you press Start/Pause button.

Canceling the time delay

If you want to cancel the time delay countdown and start the programme immediately:

1. Press "Start/Pause" button for 3 seconds to cancel the programme.
2. Then, press "Start/Pause" button to select the desired programme.

Changing the programme after it has started

You can use this feature to dry your clothes under higher or lower temperatures after your dryer has started.

For example;

1. Press and hold the "Start/Pause/Cancel" button for about 3 seconds to "Cancel" the programme in order to select "Extra Dry" programme instead of "Iron Dry" programme.
2. Select the programme with the Programme Selection button.
3. Press "Start/Pause/Cancel" button to start the programme. i Child-proof lock of the machine should not be active in order to perform this operation. If the child-proof lock is active, deactivate it before performing these operations.

Adding/removing laundry in standby mode

In order to add or remove laundry after the programme starts:

1. Press the "Start/Pause/Cancel" button to switch the dryer to "Pause" mode. The drying process will stop.
2. Open the door at "Pause" position and close it again after adding or taking out laundry.
3. Press the "Start/Pause/Cancel" button to start the programme. Note: Any laundry added after the drying process has started may cause the dried clothes in the machine to intermingle with wet clothes, and the result will be wet laundry after the drying process is over. Laundry may be added or taken out as much as desired during a drying process, but as this process will interrupt drying continuously, it will extend the programme duration and increase energy consumption. Therefore, it is recommended to add laundry before the drying programme has started.

Child-proof lock

There is a child-proof lock to prevent any programme interruption due to the pressing of buttons while the programme is running. The loading door and all buttons except the "On/Off" button on the control panel are deactivated when the child-proof lock is active.

In order to activate the child-proof lock, press the End Time "-" and Programme "+" buttons simultaneously for 3 seconds. "CL3-CL2-CL1" and "on-CL-on" appears on the display and the function is activated.

To start a new programme after the programme is over or to interrupt the programme, the child-proof lock should be deactivated. Press the same buttons for 3 seconds again to deactivate the child-proof lock. "CL3-CL2-CL1" and "oFF-CL-oFF" appears on the display and the function is deactivated.

Note: The child-proof lock is deactivated when the machine is restarted by pressing the On/Off button.

Press the relevant buttons for 3 seconds to activate the child-proof lock. A long beep will be heard and the child-proof lock will be activated. A double beep will be heard if you press any button when the child-proof lock is active. Press the buttons for 3 seconds to deactivate the child-proof lock. A single beep will be heard and the child-proof lock will be deactivated.

Ending the programme by canceling

In order to cancel the selected programme, press the "Start/Pause/Cancel" button for about 3 seconds.

Warning: As the inside of the machine will be excessively hot when you cancel the programme while the machine is running, activate the ventilation programme to cool it down.

End of programme

"End" appears on the display and the "Filter cleaning" and "Water tank" warning lights turn on when the programme is over. The door can be opened and the machine becomes ready for

a second cycle.

Press the "On/Off" button to turn off the dryer.

The final step of the drying cycle (cooling step) is performed without heat application to keep the items at a temperature that would not harm them. A 2-hour anti-creasing programme to prevent laundry from creasing will be activated if you do not take the laundry out after the programme has come to an end. If you will not take the laundry out immediately, do not stop the dryer before the drying process is complete. Clean the filter after each drying (see "Lint filter cleaning"). Drain the water tank after each drying (see "Water tank").

5 Maintenance and cleaning

Filter Cartridge / Door Inner Surface

Lint and fibres released from the laundry to the air during the drying cycle are collected in the "Filter Cartridge".

Such fibre and lint are generally formed during wearing and washing. Always clean the filter and the inner surfaces of the cover after each drying process. You can clean the filter and filter area by vacuum cleaner.

To clean the filter:

1. Open the loading door.
2. Remove the cover filter by pulling it up and open the filter.
3. Clean lint, fibre, and cotton raveling by hand or with a soft piece of cloth.
4. Close the filter and place it back into its seat.

Clogging may arise on the filter surface after using your machine for some time; if this occurs, wash the filter with water and dry it before using again.

Clean the entire inner surface of the cover and door gasket.

Sensor

There are humidity sensors in your dryer that detect whether the laundry is dry or not.

To clean the sensor:

1. Open the loading door of the dryer.
2. Allow the machine to cool down if drying has been carried out.
3. Wipe the metal sensors with a soft cloth, dampened with vinegar and dry them.

Clean metal sensors 4 times a year.

⚠️ Never use solvents, cleaning agents or similar substances when cleaning since these materials can cause fire and explosion!

Water tank:

The moisture in the damp laundry is taken from the laundry and condensed. Drain the water tank after each drying cycle or during drying when the "Water tank" warning light turns on.

⚠️ Condensed water is not drinkable!

⚠️ Never take out the water tank when the programme is running!

If you forget to drain the water tank, your dryer will stop during the following drying cycles when the water tank is full and the "Water tank" warning light will turn on. If this is the case, press the "Start/Pause/Cancel" button to resume the drying cycle after draining the water tank.

To drain the water tank:

1. Pull the drawer and remove the water tank carefully.

2-Drain the water in the tank

3-If there is lint accumulation in the funnel of the water tank, clean it under running water. 4-Place the water tank into its seat.

For the condenser:

Hot and humid air in the condenser is cooled with the cold air from the room. Thus, the humid air circulating in your dryer is condensed and then pumped into the tank.

Clean the condenser after every 30 drying cycles or once a month.

To clean the condenser:

1. If a drying process has been carried out, open the door of the machine and wait until it cools down.

1. Unlock the 2 condenser locks after opening the kick plate.

1. Pull out the condenser.

1. Clean the condenser by applying pressurized water with a shower armature and wait until the water drains.

1. Place the condenser in its housing. Fasten the 2 locks and make sure that they are seated securely.

1. Close the kick plate cover.

6 Suggested solutions for problems

Drying process takes too much time

Meshes of the lint filter may be clogged. Wash the lint filter with warm water.

Laundry comes out wet at the end of drying.

Meshes of the lint filter may be clogged. Wash the lint filter with warm water.Excessive laundry might have been loaded in. Do not load the dryer in excess.

Dryer does not switch on or the programme does not start. Dryer does not start when it is set.

It might have not been plugged in. Make sure that the machine is plugged in.The loading door may be ajar. Make sure that the loading door is properly closed.Programme might have not been set or the "Start/Pause/Cancel" button might have not been pressed. Make sure that the programme has been set and it is not in "Pause" mode."Childproof lock" might have been activated. Deactivate the Childproof Lock.

Programme is interrupted without any cause.

The loading door may be ajar. Make sure that the loading door is properly closed.Electricity may be cut off. Press "Start/Pause/Cancel" button to start the programme.

Laundry has shrunk, become felted or deteriorated.

A programme suitable for the laundry type might have not been used. Dry only the laundry which is suitable for drying in dryer after checking the labels on your clothes.Select a programme with suitable low temperature for the laundry type to dry your clothes.

Drum lightning does not come on. (For models with lamp)

Make sure that the dryer is switched on.Bulb may have blown. Call the authorised service agent to replace the bulb.

"Filter cleaning" symbol is on.

Lint filter might have not been cleaned. Clean the filter cassette.

"Water leaks from the door"

Clean the entire inner surface of the door and door gasket.

"Door opens spontaneously."

Push it until you hear that it is closed.

For products with a condenser:

"Water tank" warning symbol is on.

Water tank may be full. Drain the water in the tank.

⚠️ Call an authorised service agent if the problem persists.