RAS-14CH8 - Air-conditioner HITACHI - Free user manual and instructions
Find the device manual for free RAS-14CH8 HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split Air Conditioner |
| Model | RAS-14CH8 |
| Cooling Capacity | 14,000 BTU/h |
| Heating Capacity | 16,000 BTU/h (Heat Pump) |
| Energy Efficiency Ratio (EER) | 10.5 |
| SEER Rating | 13.0 |
| Power Supply | 230V / 60Hz / 1 Phase |
| Indoor Unit Dimensions (W × H × D) | 36.2" × 11.8" × 9.1" |
| Outdoor Unit Dimensions (W × H × D) | 32.7" × 25.6" × 13.4" |
| Indoor Unit Weight | 28.7 lbs |
| Outdoor Unit Weight | 79.4 lbs |
| Refrigerant Type | R410A |
| Operating Modes | Cool, Heat, Fan, Dry (Dehumidify) |
| Fan Speeds | Auto, Low, Medium, High |
| Air Filter | Washable, Anti-Allergy, Antibacterial |
| Control | Remote Control + Wired Controller (Optional) |
| Timer | 24-hour On/Off Timer |
| Sleep Mode | Yes |
| Self-Cleaning Function | Yes (Evaporator Cleaning) |
| Noise Level (Indoor) | 32 - 45 dB(A) |
| Noise Level (Outdoor) | 56 dB(A) |
| Installation Type | Wall Mounted |
| Recommended Room Size | Up to 650 sq. ft. |
| Maintenance | Clean filter every 2 weeks; annual professional service |
Frequently Asked Questions - RAS-14CH8 HITACHI
How often should I clean the air filter?
Clean the air filter every two weeks or more frequently in dusty conditions. A clogged filter reduces efficiency and may cause the unit to freeze.
What does the 'CH8' error code mean?
Error code CH8 indicates a communication fault between indoor and outdoor units. Check wiring connections and ensure the units are properly connected. If the problem persists, call a professional.
Can I use the air conditioner without the remote?
Yes, the unit has a manual control button on the indoor unit (usually behind the front panel) to operate in basic modes. However, the remote is required for full functionality.
What is the recommended temperature setting for heating?
For efficient heating, set the thermostat between 20-22°C (68-72°F). Each degree higher increases energy consumption by about 6-8%.
How do I enable the sleep mode?
Press the 'Sleep' button on the remote. The unit will gradually adjust the temperature over the night to maintain comfort and save energy. It also reduces fan noise.
Why is my air conditioner leaking water?
Water leakage is usually due to a clogged drain pipe or a dirty filter. Clean the filter and check the drain line for blockages. If the problem continues, inspect the installation.
What type of refrigerant does this model use?
The RAS-14CH8 uses R410A refrigerant, which is ozone-friendly. Always hire a certified technician for refrigerant handling.
How do I reset the air conditioner?
Turn off the unit and unplug it for 5 minutes. Plug it back in and turn it on. For a factory reset, press and hold the 'Reset' button on the remote (using a pin) for 3 seconds.
Can I install this air conditioner myself?
Installation requires specialized knowledge of electrical and refrigerant systems. It is recommended to have a qualified professional install the unit to ensure safety and warranty validity.
How do I activate the self-cleaning function?
Press the 'Self Clean' button on the remote while the unit is off. The indoor unit will run a cycle to dry the evaporator and prevent mold growth. The process takes about 30 minutes.
User questions about RAS-14CH8 HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual RAS-14CH8 - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RAS-14CH8 by HITACHI.