KNC-HDI47B37 - Security Camera KT&C - Free user manual and instructions
Find the device manual for free KNC-HDI47B37 KT&C in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Model | KNC-HDI47B37 |
| Brand | KT&C |
| Image Sensor | 1/3" Progressive Scan CMOS |
| Resolution | 1920 x 1080 (2MP) at 30fps |
| Lens | 2.8mm fixed lens, F2.0 |
| Night Vision | Up to 30m IR distance |
| Power Supply | DC 12V ±10%, PoE (IEEE 802.3af) |
| Power Consumption | ≤ 5W (IR on) |
| Dimensions | 150mm x 70mm x 70mm |
| Weight | 0.5 kg |
| Weatherproof Rating | IP66 |
| Main Functions | Motion detection, remote viewing via web/client, day/night auto switch, 3D DNR |
| Mounting | Wall or ceiling mount (bracket included) |
| Video Output | 1x BNC, 1x PoE (RJ45) |
| Audio | Built-in microphone (optional) |
| Maintenance | Clean lens with dry soft cloth; avoid solvents |
| Safety | Use only provided power adapter; do not expose to rain |
| Spare Parts | Contact KT&C distributor or service center |
| Repairability | Authorized service only; warranty void if opened |
| Operating Temperature | -20°C to 50°C |
Frequently Asked Questions - KNC-HDI47B37 KT&C
How do I power the KNC-HDI47B37 camera?
The camera supports both DC 12V (2A adapter included) and PoE (Power over Ethernet, IEEE 802.3af). Use only the supplied power adapter or a compatible PoE switch.
Can I view the camera remotely?
Yes, the camera supports remote viewing via a web browser (using IP address) or through the manufacturer’s CMS software. Ensure the camera is connected to your network and configured with a static IP.
How do I reset the camera to factory defaults?
Press and hold the reset button (located near the Ethernet port) for 10 seconds while the camera is powered on. The camera will reboot with default settings.
What is the night vision range?
The camera has built-in IR LEDs that provide up to 30 meters of night vision in complete darkness. The IR cut filter automatically switches for day/night mode.
Is the camera weatherproof?
Yes, it has an IP66 rating, meaning it is dust-tight and protected against heavy rain or direct water jets. Suitable for outdoor use.
What is the maximum resolution?
The camera supports 1920x1080 (1080p) resolution at 30 frames per second. It uses a 2MP progressive scan CMOS sensor.
Does the camera support motion detection?
Yes, it has built-in motion detection. You can set up alerts via email, FTP, or alarm output. The detection zones and sensitivity can be adjusted in the camera’s web interface.
How do I install the camera?
Mount the camera using the included bracket and screws. Connect Ethernet for PoE or power with DC adapter. Use the installation wizard on the web interface to configure network settings. For detailed steps, refer to the user manual.
What is the field of view?
With the 2.8mm lens, the camera has a horizontal field of view of about 110° and a vertical FOV of 60°, ideal for wide-area surveillance.
Can I record video directly to an SD card?
No, this model does not have a microSD slot. For local recording, you need an NVR (network video recorder) or use a PC with the manufacturer’s recording software.
User questions about KNC-HDI47B37 KT&C
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual KNC-HDI47B37 - KT&C and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KNC-HDI47B37 by KT&C.