1917/76 SS - Range hood Elba - Free user manual and instructions

Product Type	Range hood
Brand	Elba
Model	1917/76 SS
Material	Stainless Steel
Width	76 cm
Depth	50 cm
Height	15 cm
Mounting Type	Wall-mounted
Power Supply	230 V / 50 Hz
Number of Speeds	3
Control Type	Push-button
Lighting	LED
Filter Type	Aluminum grease filter
Airflow Rate	400 m³/h
Noise Level	60 dB
Weight	12 kg
Energy Class	A
Maintenance	Clean grease filters monthly
Safety Features	Overheat protection
Spare Parts	Filters and bulbs available

Frequently Asked Questions - 1917/76 SS Elba

How to install the range hood?

Follow the user manual instructions. Ensure the hood is securely mounted to a wall stud and the ductwork is properly connected. For detailed steps, refer to the installation section.

How to clean the grease filters?

Remove the filters and wash them with warm soapy water or place them in the dishwasher. Allow to dry completely before reinstalling. Clean monthly for optimal performance.

What type of bulbs does it use?

The range hood uses LED bulbs. Replacement bulbs can be purchased from Elba or authorized dealers. Ensure the wattage matches the specifications.

How to reduce noise?

Noise can be minimized by ensuring the hood is installed correctly and the filters are clean. Also, check that the ductwork is not obstructed. If noise persists, contact customer service.

Can it be used with a charcoal filter?

Yes, if you wish to use the hood in recirculation mode, an optional charcoal filter must be installed. This filter helps remove odors and should be replaced every 6-12 months.

What is the warranty?

Elba offers a standard 2-year warranty on this range hood. For details, refer to the warranty card included in the package.

How often to replace filters?

Grease filters should be replaced every 3-6 months or when damaged. Charcoal filters (if used) should be replaced every 6-12 months. Regular replacement ensures efficiency.

Does it have a remote control?

No, this model does not include a remote control. It is operated via push buttons on the front panel.

What to do if the hood stops working?

Check the power supply and circuit breaker. Ensure the plug is securely connected. If the issue persists, contact Elba customer service for assistance.

Where to find spare parts?

Spare parts such as filters and bulbs can be ordered from the Elba website or through authorized service centers. Use model number 1917/76 SS when ordering.

USER MANUAL 1917/76 SS Elba

Line drawing of a kitchen air conditioner unit with two fans (no text or symbols)

ELBA

COOKER HOOD

MODEL: 1917/76MC

1917/76SS

Owner's Manual

Please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the set and quote this information to your dealer when you require service.

Please read this instruction carefully. It is advisable to keep this instruction manual in a safe place for future reference.

SAFETY PRECAUTIONS

1. Keep electrical appliances out of reach from children. Do not let them to operate the appliances without supervision.
2. To protect against the risk of electrical shock, do not immerse the product, cord or plug into water or any other liquid.
3. This product is for household and indoor use only.
4. This product is not intended for use by person (including children) with reduced physical, sensory or mental capabilities unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
5. If the power cord or plug in damaged, it must be replaced by the service centre or a qualified service technician to avoid hazard.
6. Before installation, check if the mains supply voltage is matched with the voltage stated on the rating plate of the hood.
7. There must be adequate air ventilation of the room when the cooker hood is used with the cooking appliances with burning gas or other fuels.
8. Ensure that the installation of exhaust complies with the standard of local building, gas and electrical authorities.
9. Do not ignite flames in the pans.
10. There is a risk of fire if cleaning is not carried out in accordance with this instruction.

ASSEMBLY INSTRUCTIONS

Please check the following before installation:

• Installation of hood must be carried out by an authorized or qualified technician.
- For optimum air extraction, avoid having too many windows surrounding the cooker hood which will cause air convection.
- Make sure the hood is in level after installation to avoid oil spill over from the oil cup collectors.
- The optimum height for the installation is between 650 to 750mm which measure from the bottom of the hood to the top of the hob.
- Remove all packaging materials from the cooker hood. Check if both sides of the cooker hood have a metal hook installed.

1) Loosen the screws on the metal hook but do not loosen completely. Allow the metal hook to move up and down slightly.
2) Using the metal hook provided, determine the height of the cooker hood to be installed on the wall. Mark the wall with two markers left and right then drill the hole at the size 1.4"
3) Plug the plastic anchor into the holes tightly. Fix the installation screws by leaving 5mm gap from the wall.
4) Hang the cooker hood to the installation screws of 5mm gap and tighten the screws firmly.
5) Plug in the wall plug and switch on the power.

PRODUCTION DESCRIPTION

1) Mounting Screws (Left & Right)
2) Switch
3) LED lamp
4) Grill Guard
5) Oil Cup

OPERATING INSTRUCTIONS

1. Press the ON/OFF button to turn the unit on and off.
2. Press the Left and Right button to operate the fan blower. Press again to turn off.
3. Press the Light button to illuminate the LED lamp on/off.

(RRemarks: The Light function is independent from the ON/OFF button)

CLEANING AND MAINTENANCE

• The hood must always be disconnected from the electricity supply before carrying out the maintenance.
• Clean the hood with damp cloth, hot water and mild detergent. Do not use chemical, steel, wooden or abrasive cleaners to clean the hood.
• Clean the oil cups when they are more than half filled to avoid the oil from spilling.
• Remove the oil cups, wash in hot soapy water, dry and fit back into the hood. Do not use the hood without the oil cup installed.

MAIN SPECIFICATION

Rated Voltage : 220-240V/50Hz

Light : 2 x 1.5W

Motor : Twin Motor

Exhaust Diameter : 6"

Suction Power : 885m³/hr

Motor Power : 160W

Motor Speed : 1,430 RPM

Product Dimension : 755mm(W) x 100mm (H) x 510mm(D)

Product Weight : 9.6KG

NOTICE

This product must not be disposed together with domestic waste. It has to be disposed at an authorized place for recycling of electrical and electronic appliances. By collecting and recycling waste, you help to save natural resources and make sure the product is disposed in an environmental friendly and healthy way.

ELBA