Dandy Sound 2 - Headphones Phoenix Technologies - Free user manual and instructions

Product Type	Over-ear wireless headphones
Brand	Phoenix Technologies
Model	Dandy Sound 2
Dimensions (approx)	7.5 x 6.3 x 3.1 inches (190 x 160 x 80 mm)
Weight (approx)	250 g (8.8 oz)
Battery Life	Up to 30 hours
Charging Port	USB-C
Charging Time	Approx 2 hours
Bluetooth Version	5.0
Bluetooth Range	Up to 10 meters (33 ft)
Driver Size	40 mm
Frequency Response	20 Hz - 20 kHz
Impedance	32 ohms
Sensitivity	105 dB
Microphone	Built-in omnidirectional
Controls	Volume, playback, and call buttons on earcup
Foldable	Yes
Included Accessories	USB-C charging cable, 3.5 mm audio cable, carrying case
Color Options	Black, White
Cleaning	Wipe with a soft, dry cloth
Safety Warnings	Keep away from water; do not disassemble
Spare Parts Availability	Earpads and cables are replaceable; contact support
Compliance	CE, FCC, RoHS

Frequently Asked Questions - Dandy Sound 2 Phoenix Technologies

How do I pair the Dandy Sound 2 with my phone?

Turn on the headphones and put them in pairing mode by pressing and holding the power button until the LED flashes blue and red. Then, enable Bluetooth on your phone and select 'Dandy Sound 2' from the list.

What is the battery life of the Dandy Sound 2?

The battery lasts up to 30 hours on a full charge at moderate volume. Charging time is approximately 2 hours via USB-C.

Can I use the headphones while charging?

No, it is not recommended to use the headphones while charging as it may affect battery health and could be a safety hazard.

How do I adjust the volume?

Use the volume up and volume down buttons on the right earcup. A single press changes volume by one step; long press for continuous adjustment.

The headphones are not connecting to my device. What should I do?

First, ensure the headphones are in pairing mode. If they were previously paired, delete the device from your phone's Bluetooth list and re-pair. Also, check that the headphones are charged and within range (10 meters).

Does the Dandy Sound 2 have a microphone?

Yes, it has a built-in omnidirectional microphone for phone calls and voice assistants. The microphone is located on the right earcup.

What is the warranty period?

Phoenix Technologies offers a one-year limited warranty against manufacturing defects. Please keep your proof of purchase for warranty claims.

How do I clean the headphones?

Use a soft, dry cloth to wipe the exterior. Do not use liquids or abrasive cleaners. For the earpads, gently remove them if possible and clean with a slightly damp cloth, then dry thoroughly.

Are these headphones compatible with gaming consoles?

Yes, they can connect via Bluetooth or the included 3.5 mm audio cable to devices with a headphone jack, such as PlayStation, Xbox (with adapter), or Nintendo Switch.

What should I do if the headphones get wet?

Immediately turn off the headphones and dry them with a soft cloth. Do not use heat. Place them in a dry, ventilated area for at least 24 hours before using again. If damage occurs, contact support.

USER MANUAL Dandy Sound 2 Phoenix Technologies

Table of contents		H1/H2 USER MANUAL	H1/H2 USER MANUAL H1/H2 USER MANUAL H1/H2 USER MANUAL H1/H2 USER MANUAL
1 Introduction......12 Kit Contents......13 Connection Diagram......4 How to use......24.1 General function......25 4.2 Pairing to mobile phone......26 4.3 Charging your dev......3 Safety Rules......5 Technical specification......5 Service and Support......5 FAQ......6......6	1. IntroductionCongratulations, and thank you for choosing the BluetoothStereo Headphone. This manual will help you operate theBluetooth Stereo Headphone, but you should firstfamiliarize yourself with the Bluetooth functionality of yourmobile phone or other devices before using the BluetoothStereo Headphone. The device is completed.Safety Rules......Please follow the rules depicted in this manual closelyto ensure your safety. Before using this BluetoothStereo Headphone, we would strongly encourage youto readthrough this user manual.2. Bit performance of any edges, uneven surfaces, metalparts, accessories and its packaging so as to preventtry possible injury or damage.3. Do not modify, repair or discharge this BluetoothStereo Headphone. Doing so may result in fires, electricstroke, complete breakdown of this Bluetooth StereoHeadphone, etc. All of which, are not covered undercharging.4.1 Charging not use any diluents or volatile liquid to clean theBluetooth Stereo Headphone.5. Do not use the Bluetooth Stereo Headphone in ahazardous location.2.Kit Contents......1X Bluetooth Headset H1/H21X USB Changer1X User Manual	3.Connection DiagramVolume up———Volume down———PreviousPress is for volume downNextPress* is for next music.Turn offPress the → button for 3 seconds whenthe device is on (a tone voice beep andreject call)Low batterywarning(The LED flash)ChargingPlug the charger to port of the device.(Red LED is oh)Answer callPress the → button for 1second whilethe call comingEnd callPress the → button for 1second to endcallTransfer callvoicePress the → button for 2seconds whenthe device is off.(Blue LED slowly flashesand a tone voice beep)Reject callPress the → button for 2seconds toreject call when the call is ringing4.2. Pairing to Mobile phone or other deviceTo use your Bluetooth Stereo Headphone, you must first pairyour Stereo Headphone with a phone or a computer. Onceyour Bluetooth Stereo Headphone is paired to a specificmobile phone, they will remain paired and automaticallyrecognize each other whenever they are within range.Play / pausePress to play when the device is pausingand press to pause when the device isplaying.Volume upPress is for volume up	Desired ResultRequired Action		• Turn on the Bluetooth Stereo Headphone to the paring• mode.• Search your Bluetooth devices on your phone byfollowing the phone. Select functions allow your phoneshue manual for more information.After a few second the phone will list the device as adiscover device. Select functions allow your phoneshinstruction to select this pairing.• Then your phone will request a passkey or PIN, enter0000 as your PIN or passkey.• Your phone will confirm the pairing, and then press Yes/Ok.• Finally, select to connect with device from your phone.You can play music; watch TV/movie and play game withthe your phone, then your can hear all the sound or musicform the device. Also you can control the player byoperating the device. Example, volume up and next music.Pairing to a computer and Entertainment:If the device is not performing as it should,please take it toyour local service providers or dealer for service.7.FAQ11. Why is there no power even when the Stereo Headphoneis power on?Ans: Ensure the battery is being charged up to 6 hours forfirst time using. The LED is lighted when it startscharging.2There is no sound when playback.Ans: Check the connection between your device withphone or computer, if the connection is notestablished, pleasereconnect again. Make sure theStereo Headphone device is paired and connectedtarget phone or other master device.3How can I know the Bluetooth Stereo Headphone hasbeen fully charged?Ans: When the indicator LED turns red to blue when it ischarging, it has been fully chargedSignal-To-Noise≥90dB	ParameterValueDistortion8 hcdthsPlayback Time8 hcdthsCharging Time1.5 hoursDimension156.9×163.5×47mm(H1)156.9×163.5×49mm(H2)Weight110g6.Service and SupportIf your device is not performing as it should,please take it toyour local service providers or dealer for service.7.FAQ11. Why is there no power even when the Stereo Headphoneis power on?Ans: Ensure the battery is being charged up to 6 hours forfirst time using. The LED is lighted when it startscharging.2There is no sound when playback.Ans: Check the connection between your device withphone or computer, if the connection is notestablished, plesareconnect again. Make sure theStereo Headphone device is paired and connectedtarget phone or other master device.3How can I know the Bluetooth Stereo Headphone hasbeen fully charged?Ans: When the indicator LED turns red to blue when it ischarging, it has been fully chargedSignal-To-Noise≥90dB	ParameterValueDistortion8 hcdthsPlayback Time8 hcdthsCharging Time1.5 hoursDimension156.9×163 5×47mm(H1)156.9×163.5×49mm(H2)Weight110g6Service and SupportIf your device is not performing as it should,please take it toyour local service providers or dealer for service.7.FAQ11. Why is there no power even when the Stereo Headphoneis power on?Ans: Ensure the battery is being charged up to 6 hours forfirst time using. The LED is lighted when it startscharging.2There is no sound when playback.Ans: Check the connection between your device withphone or computer, if the connection isnotestablished, pleasereconnect again. Make sure theStereo Headphone device is paired and connectedtarget phone or other master device.3How can I know the Bluetooth Stereo Headphone hasbeen fully charged?Ans: When the indicator LED turns red to blue when it ischarging, it has been fully chargedSignal-To-Noise≥90dB
	1	1	2	3	4	5	6