EM8665 - Motion detector Eminent - Free user manual and instructions

Product Type	Vibration detector
Model	EM8665
Brand	Eminent
Power Supply	2 x AAA batteries (included)
Battery Life Indicator	LED flashes every 2 seconds when low
Sensitivity Settings	High, medium, low (jumper selectable)
Detection Output	Wireless alarm signal to compatible alarm system
LED Indication	Flash once on detection; flash every 2s for low battery
Installation Method	Double-sided adhesive tape (included)
Antenna Orientation	Must be upward
Compatible Systems	Eminent alarm systems (learn mode via tamper switch)
Warranty Period	5 years
Regulatory Compliance	EN 301 489, EN 300 220, EN 62479, EN 60950
Package Contents	Detector, manual, 2x AAA batteries, double-sided tape
Manual Languages	English (original), other languages available on request
Support	Online support form and phone numbers per country
Self-Repair	Invalidates warranty; only by qualified Eminent staff

Frequently Asked Questions - EM8665 Eminent

What items are included in the package?

The package includes the EM8665 vibration detector, a user manual, 2 AAA batteries, and a double-sided adhesive strip.

How do I connect the vibration detector to my alarm system?

Put the alarm system into connection mode (input code and press memo). Then press the tamper switch or trigger the detector. A successful connection is confirmed by one beep from the alarm system.

How do I adjust the sensitivity?

Remove the back cover using a screwdriver and set the jumper to the desired sensitivity: high, medium, or low.

How do I know when the batteries are low?

The LED indicator flashes once every 2 seconds to indicate low battery. Replace the batteries immediately.

What type of batteries does the detector use?

It uses 2 AAA batteries, which are included in the package.

Can I install the detector on any surface?

Clean the surface first, then mount the detector using the supplied double-sided adhesive tape. Ensure the antenna is pointing upward.

What is the warranty period?

Eminent offers a 5-year warranty on the EM8665. The warranty covers defects but not misuse, self-repair, or wear-and-tear items like batteries.

Is the detector waterproof?

The manual does not specify waterproofing. It is intended for indoor use or protected locations. Avoid exposure to moisture.

How do I get technical support?

Visit www.eminent-online.com/support to fill out the support form or call the phone number for your country listed in the manual.

What does the LED flash once indicate?

A single flash indicates that intrusion has been detected, and an alarm signal is being sent to the alarm system.

USER MANUAL EM8665 Eminent

1.0 Introduction ......2
1.1 Packing contents ......2
1.2 Front panel....3
1.3 Vibration detector inside .... 3
2.0 Sensitivity setting....4
3.0 Connect to the alarm system 4
4.0 Installation....4
5.0 Frequently Asked Questions and other related information....5
6.0 Service and support....5
7.0 Warning and points of attention ....6
8.0 Warranty conditions....7
9.0 Declaration of Conformity ....8

1.0 Introduction

Congratulations with the purchase of this high-quality Eminent product! This product has undergone extensive testing by Eminent's technical experts. Should you experience any problems with this product, you are covered by a five-year Eminent warranty. Please keep this manual and the receipt in a safe place.

Register your product now on www.eminent-online.com and receive product updates!

1.1 Packing contents

The following parts need to be present in the packing:

• EM8665 Vibration detector
- Manual
- 2pcs AAA batteries
- Double sided adhesive strip

1.2 Front panel

LED indicator :

Flash once : Intrusion detected, alarm signal will be send to the alarm system.

Flash once every 2 seconds : Low battery. Please replace the batteries immediately.

1.3 Vibration detector inside

2.0 Sensitivity setting

Gently remove the back cover with a screwdriver. Set the jumper accordingly to the required sensitivity.

1) High sensitivity
2) Medium sensitivity
3) Low sensitivity

3.0 Connect to the alarm system

Make sure the alarm system is in connection state (input code on alarm system and press the memo button).

Press the tamper switch or trigger the vibration detector. When the vibration detector is connected successful the alarm system will give one beep.

4.0 Installation

1. Remove the battery insulation strip. The detector will be switched on automatically.
2. Clean the object on which the vibration detector should be installed.
3. Mount the vibration detector with the supplied double sided adhesive tape to the surface. Make sure the antenna is upward.
4. Test if the vibration detector is working correctly. If necessary adjust the sensitivity as mentioned in chapter "Sensitivity setting".

5.0 Frequently Asked Questions and other related information

The latest Frequently asked questions for your product can be found on the support page of your product. Eminent will update these pages frequently to assure you have the most recent information. Visit www.eminent-online.com for more information about your product.

6.0 Service and support

This user's manual has been carefully written by Eminent's technical experts. If you have problems installing or using the product, please fill out the support form at the website www.eminent-online.com/support.

You can also contact us by phone. Below you will find a list with phone numbers for each supported country.

Country	Phone number	Rate per minute*
Belgium (Dutch)	070 277 286	€0.30
Belgium (French)	070 277 286	€0.30
Denmark	[phone]	Local Costs
Finland	[phone]	Local Costs
Germany	[phone]	Local Costs
Italy	[phone]	Local Costs
Norway	[phone]	Local Costs
Spain	807 080 042	€0.41
Sweden	[phone]	Local Costs
The Netherlands	0900-3646368	€0.10
UK	[phone]	Local Costs
Hungary	1-4088902 (From Budapest)	Local Costs
Hungary	06-1-4088902 (From the rest of Hungary)	Local Costs
Hungary	[phone](International)	Local Costs

* Rates mentioned in this table do not include cell phone charges.

7.0 Warning and points of attention

Due to laws, directives and regulations set out by the European parliament, some (wireless) devices could be subject to limitations concerning its use in certain European member states. In certain European member states the use of such devices could be prohibited. Contact your (local) government for more information about this limitations.

Always follow up the instructions in the manual*, especially where it concerns devices which need to be assembled.

Warning: In most cases this concerns an electronic device. Wrong/improper use may lead to (severe) injuries!

Repairing of the device should be done by qualified Eminent staff. The warranty immediately voids when products have undergone self-repair and/or by misuse. For extended warranty conditions, please visit our website at www.eminent-online.com/warranty.

*Tip: Eminent manuals are written with great care. However, due to new technological developments it can happen that a printed manual does not longer contain the most recent information.

If you are experiencing any problems with the printed manual or you cannot find what you are looking for, please always check our website www.eminent-online.com first for the newest updated manual.

Also, you will find frequently asked questions in the FAQ section. It is highly recommended to consult the FAQ section. Very often the answer to your questions will be found here.

8.0 Warranty conditions

The five-year Eminent warranty applies to all Eminent products, unless mentioned otherwise before or during the moment of purchase. After buying a second-hand Eminent product the remaining period of warranty is measured from the moment of purchase by the product's initial owner. Eminent warranty applies to all Eminent products and parts, indissolubly connected or mounted to the product it concerns. Power supply adapters, batteries, antennas and all other products not directly integrated in or connected to the main product or products of which, without reasonable doubt, can be assumed that wear and tear during use will show a different pattern than the main product, are not covered by the Eminent warranty. Products are not covered by the Eminent warranty when exposed to incorrect/improper use, external influences or when opening the service parts of the product by parties other than Eminent. Eminent may use refurbished materials for repair or replacement of your defective product. Eminent cannot be held responsible for changes in network settings by internet providers. We cannot guarantee that the Eminent networking product will keep working when settings are changed by the internet providers. Eminent cannot guarantee the working of web services, apps and other third party content that is available through Eminent products. Eminent products with an internal hard disk have a limited warranty period of two years on the hard disk. Eminent could not be held responsible for any data lost. Please make sure that if the product stores data on a hard drive or other memory source, you will make a copy before you return the product for repair.

When my product gets defective

Should you encounter a product rendered defective for reasons other than described above: Please contact your point of purchase for taking care of your defective product.

9.0 Declaration of Conformity

Application of Council Directives:

Manufacturer's Name: Eminent

Type of Equipment: Vibration detector

Equipment Class: Commercial, Light Industrial, Consumer

PRODUCTNUMBER: EM8665

Conforms to the following standards: EN 301 489-1 V1.9.2:2011

EN 301 489-3 V1.4.1:2002

EN 300 220-1 V2.4.1:2012

EN 300 220-2 V2.4.1:2012

EN 62479:2010

EN60950-1:2006 + A11:2009 + A1:2010 + A12:2011

Manufactured from: 5-11-2013

I, the undersigned, hereby declare that the equipment Conforms with the essential requirements and other relevant requirements of the R&TTE Directive (1999/5/EC) and to the above standards.

Place: Barneveld, The Netherlands

Date: 5-11-2013

Name: Marc Pannebakker

Signature:

WWW.EMINENT-ONLINE.COM

Trademarks: all brand names are trademarks and/or registered trademarks of their respective holders.

The information contained in this document has been created with the utmost care. No legal rights can be derived from these contents. Eminent cannot be held responsible, nor liable for the information contained in this document.

Eminent is a member of the Intronics Group