SD-ADA40001 - Memory reader Syba - Free user manual and instructions

Product Type	Memory Card Reader
Brand	Syba
Model	SD-ADA40001
Supported Cards	SD, SDHC, SDXC, Micro SD, MMC, MS, MS Pro, MS Duo
Interface	USB 2.0
Dimensions (L x W x H)	5.5 x 2.5 x 1.0 inches (140 x 64 x 25 mm)
Weight	3.2 oz (90 g)
Power Source	USB bus-powered
Operating System Compatibility	Windows, macOS, Linux
Programming	Plug and Play, no driver installation required for most OS
LED Indicator	Yes, power/activity LED
Cable Length	3.3 ft (1 m) USB cable
Housing Material	ABS plastic
Color	Black
Operating Temperature	0°C to 60°C (32°F to 140°F)
Storage Temperature	-20°C to 85°C (-4°F to 185°F)
Humidity	10% to 90% non-condensing
Certifications	CE, FCC, RoHS
Package Contents	Card reader, USB cable, user manual
Warranty	1 year limited

Frequently Asked Questions - SD-ADA40001 Syba

What memory cards does the Syba SD-ADA40001 support?

The Syba SD-ADA40001 supports a wide range of cards including SD, SDHC, SDXC, Micro SD, MMC, Memory Stick (MS, MS Pro, MS Duo), and more.

Does the reader require a driver installation?

No, the Syba SD-ADA40001 is Plug and Play. It works automatically with Windows, macOS, and most Linux distributions without additional drivers.

What is the maximum card capacity supported?

The reader supports SD cards up to 32 GB (SDHC) and SDXC cards up to 2 TB. However, performance may vary depending on the card class and file system.

What is the transfer speed of this card reader?

The reader uses USB 2.0 interface, providing data transfer speeds up to 480 Mbps. Actual speed depends on the memory card's speed class.

Can I use multiple cards at the same time?

No, the reader has single slot design. You can only access one card at a time. However, you can switch cards without restarting your computer.

Is the reader compatible with USB 3.0 ports?

Yes, the Syba SD-ADA40001 is backward compatible with USB 3.0 ports, but it will operate at USB 2.0 speeds.

How do I clean and maintain the reader?

Keep the reader away from moisture and dust. Gently wipe the exterior with a dry cloth. Do not use liquids or abrasive cleaners. Avoid inserting bent or damaged cards.

What should I do if the reader is not detected by my computer?

First, try a different USB port or cable. Ensure the card is correctly inserted. On Windows, check Device Manager for unrecognized devices. If using a USB hub, connect directly to the computer.

Does the reader work with game consoles or Android devices?

The reader is designed for PC and Mac. It may work with some Android devices via OTG adapter, but compatibility is not guaranteed. It is not intended for game consoles.

What is included in the package?

The package includes the card reader unit, a USB cable (approximately 1 meter), and a user manual.

USER MANUAL SD-ADA40001 Syba

This SATA II to CF adapter is designed for converting a SATA port on a host system to Compact Flash Card interface. The SATA interface supports SATA-II (1.5Gbps and 3.0Gbps) host port. The Compact Flash interface supports Ultra-DMA Compact Flash Type I & II card and capable of transferring data at 150MBps. The versatility and the high performance of this adapter make it an ideal CF read/write device for many industrial PCs and embedded systems applications.

APPLICATIONS

• Linux-based set-top boxes, routers, firewalls
• Diskless network clients
- Industrial computers
• Any other device requiring rugged solid-state storage

SPECIFICATION

• Supports SATA II (1.5Gbps and 3.0Gbps) host interface
• Supports SATA hot swap
- Does NOT support hot swap on Compact Flash interface
• Supports Compact Flash Type I & II (Micro-drive) form factors
- Compact Flash card power selected by jumper setting (+3.3V or +5V)
• Power input: DC +5V floppy disk drive power connector
• LED indicators: Power-on, Card Detect, Disk Activity
• Included rear bracket for external applications
• Transparent to the operating system and does not require software driver
• Board size: 70mm x 63mm x 1.0mm (W, L, T)

- Compact Flash interface supports PIO mode and Ultra-DMA mode with data transfer rate up to 150MBps (Depends on Compact Flash card speed)

PACKAGE CONTENTS

Please check whether the package contains the following items. If any item is missing or damaged, please contact the retailer as soon as possible:

• SATA II to CF adapter
- User manual
• Standard rear bracket and screws

LAYOUT

J1 - SATA connector

CN1 - Floppy disk drive power connector

CN3 - Compact Flash socket

LED1 - Compact Flash Card-Detect indicator

LED2 - Disk Activity indicator

LED3 - Power-on indicator

Jumper Settings (*) = Default factory setting

JP1 - Compact Flash voltage selection:

1-2 (*)	DC +5.0 Volts
2-3	DC +3.3 Volts

All specifications and information are subject to change without prior notice. All logos and trademarks referenced are the registered trademark of their respective owners