UNIDEN

DECT4096 - Phone UNIDEN - Free user manual and instructions

Find the device manual for free DECT4096 UNIDEN in PDF.

📄 52 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice UNIDEN DECT4096 - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Cordless Phone
Brand Uniden
Model DECT4096
Category Telephone
Frequency 1.8 GHz DECT
Handset Dimensions 170 x 50 x 30 mm
Base Station Dimensions 100 x 80 x 60 mm
Handset Weight 120 g
Power Supply AC adapter 9V DC
Battery Type Ni-MH rechargeable (AAA x 2)
Battery Life Up to 10 hours talk time, 100 hours standby
Phonebook Capacity Up to 100 names and numbers
Caller ID Yes (requires subscription)
Speakerphone Yes, on handset
Intercom Yes, between handsets
Range (indoor) Up to 50 meters
Range (outdoor) Up to 300 meters
Call Log Up to 30 entries
Redial Last 10 numbers
Ringtones 10 polyphonic
Wall Mountable Yes
Maintenance Clean with a dry, soft cloth. Do not use liquids.
Security DECT 128-bit encryption
Spare Parts Batteries, charger, handset (contact Uniden support)
Repairability Battery and handset replacement possible; professional service required for other issues.

Frequently Asked Questions - DECT4096 UNIDEN

How do I charge the handset for the first time?
Place the handset on the base station or charger. Charge for at least 15 hours before first use. The battery indicator will show charging status.
Can I use the phone without a landline?
No, the DECT4096 requires a landline connection. It is a cordless landline phone, not a cellular device.
How do I store contacts in the phonebook?
Press the phonebook button, then select 'Add New Entry'. Enter the name and number using the keypad, and confirm. The phonebook holds up to 100 entries.
What does the 'Talk' button do?
Press the Talk button to make or answer a call. During a call, press it again to hang up or switch to speakerphone mode.
How do I adjust the ringer volume?
When the phone is idle, press the volume up/down buttons on the side of the handset. You can also access the menu under 'Settings' > 'Ringer Volume'.
Why is my handset showing 'No Base'?
The handset is out of range or not registered to the base. Bring the handset closer to the base. If the issue persists, re-register the handset via the base's menu (press and hold the find button on the base).
Can I add extra handsets to this system?
Yes, the DECT4096 supports up to 5 handsets. Additional handsets must be registered to the base. Refer to the manual for registration steps.
What type of battery does the handset use?
It uses two rechargeable Ni-MH AAA batteries (1.2V, 400-600 mAh). You can replace them with standard rechargeable AAA batteries if needed.
How do I enable call waiting?
Call waiting must be activated by your telephone service provider. On the phone, press the Flash or Recall button to switch between calls when you hear the waiting tone.
What should I do if the phone is not ringing?
Check that the ringer is not turned off (menu > Settings > Ringer > On). Ensure the handset is charged and registered. Also, verify that the telephone line is working by testing with another phone.

User questions about DECT4096 UNIDEN

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Phone in PDF format for free! Find your manual DECT4096 - UNIDEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DECT4096 by UNIDEN.

USER MANUAL DECT4096 UNIDEN

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : UNIDEN

Model : DECT4096

Category : Phone