TW-EAV510-AC V2 - Router TeleWell - Free user manual and instructions
Find the device manual for free TW-EAV510-AC V2 TeleWell in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | VDSL2/ADSL2+ Router with Wi-Fi |
| Model | TW-EAV510-AC V2 |
| Brand | TeleWell |
| Dimensions (W x D x H) | 200 mm x 140 mm x 35 mm |
| Weight | 0.5 kg |
| Power Supply | 12V DC, 1A |
| Wi-Fi Standard | IEEE 802.11ac (dual-band 2.4 GHz & 5 GHz) |
| Ethernet Ports | 4x Gigabit LAN, 1x Gigabit WAN |
| USB Port | 1x USB 2.0 |
| DSL Support | VDSL2 (up to 100 Mbps), ADSL2+ (up to 24 Mbps) |
| VoIP Feature | 2x FXS ports for analog phones |
| Wireless Security | WPA/WPA2, WEP, WPS |
| Firewall | SPI, NAT, DoS prevention |
| Management | Web GUI, CLI, Telnet, TR-069 |
| Firmware Update | Via web interface or TFTP |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Reboot, reset to factory defaults, firmware upgrade |
| Spare Parts | Power adapter, Ethernet cable, DSL filters |
| Repairability | User-serviceable parts: none; contact support for repairs |
| Safety Certifications | CE, RoHS |
Frequently Asked Questions - TW-EAV510-AC V2 TeleWell
How do I set up the TeleWell TW-EAV510-AC V2 router for the first time?
Connect the router to your phone line using the DSL cable, power it on, and connect your computer via Ethernet. Open a browser and go to 192.168.1.1. Use default credentials (admin/admin) and follow the setup wizard to configure your internet connection.
What is the default IP address and login for the router?
The default IP address is 192.168.1.1 and the default username/password is admin/admin (both lowercase). It is recommended to change the password after setup.
How can I change my Wi-Fi password?
Log into the router's web interface (192.168.1.1), go to Wireless Settings, select the 2.4 GHz or 5 GHz band, and enter a new passphrase in the Pre-Shared Key field. Save the settings.
Does the TW-EAV510-AC V2 support Dual Band operation?
Yes, it supports simultaneous dual-band Wi-Fi on 2.4 GHz and 5 GHz frequencies, providing speeds up to 300 Mbps (2.4 GHz) and 867 Mbps (5 GHz) under ideal conditions.
How do I reset the router to factory defaults?
Locate the reset button on the back of the router. Use a paperclip to press and hold it for about 10 seconds until the power LED starts flashing. Release the button; the router will reboot with factory settings.
Can I use the router as a wireless access point?
Yes, you can disable DHCP and connect the router's WAN port to your existing network. Refer to the manual for detailed steps to switch to Access Point mode.
How do I update the firmware on my TeleWell router?
Download the latest firmware from the TeleWell support website. Log into the router, go to System Tools > Firmware Upgrade, choose the file, and click Upgrade. Do not power off during the update.
What should I do if I forget my router's admin password?
Perform a hardware reset as described above to restore the default username and password (admin/admin). Note that this will erase all custom settings.
How many Ethernet ports does the router have?
It has 4 Gigabit LAN ports for connecting wired devices and 1 Gigabit WAN port (also configurable as LAN). Additionally, there are 2 FXS ports for telephones.
Is the TeleWell TW-EAV510-AC V2 compatible with VoIP services?
Yes, it includes 2 FXS ports for connecting analog phones to VoIP services. You can configure SIP accounts in the router's voice settings menu.
User questions about TW-EAV510-AC V2 TeleWell
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual TW-EAV510-AC V2 - TeleWell and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TW-EAV510-AC V2 by TeleWell.