BIPAC 7402GX - Router Billion - Free user manual and instructions
Find the device manual for free BIPAC 7402GX Billion in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | ADSL2+ Wireless Router |
| Brand | Billion |
| Model | BIPAC 7402GX |
| Dimensions (approx.) | 200 x 150 x 30 mm |
| Weight (approx.) | 300 g |
| Power Supply | 12V DC, 1A external adapter |
| WAN Interface | ADSL2+ RJ-11 |
| LAN Interface | 4 x 10/100 Ethernet RJ-45 |
| Wireless Standard | 802.11g (up to 54 Mbps) |
| Firewall | SPI, NAT, DoS protection |
| VPN Support | PPTP, IPSec pass-through |
| Main Functions | ADSL2+ modem, router, wireless access point, firewall, QoS |
| Indicators | Power, ADSL, LAN, WLAN, Internet |
| Maintenance | Clean exterior with soft dry cloth; avoid liquids |
| Safety Precautions | Keep away from water, heat sources, and direct sunlight |
| Spare Parts / Repairability | Power adapter available separately; no user-serviceable parts inside |
| Additional Features | Dual WAN failover (ADSL + Ethernet), VoIP (optional) |
Frequently Asked Questions - BIPAC 7402GX Billion
How do I reset the Billion BIPAC 7402GX to factory defaults?
Press and hold the Reset button on the back panel for 10 seconds using a paperclip while the device is powered on. Release when the lights blink to confirm reset.
What is the default IP address and login?
The default IP is 192.168.1.1. Use username admin and password admin (or blank) to access the web interface.
How do I change the Wi-Fi password?
Log into the router's web interface, go to Wireless > Security, and enter a new pre-shared key (PSK). Save the settings and reconnect devices.
Why is the ADSL LED not lighting up?
Check that the telephone cable is properly connected to the ADSL port and the wall jack. If the issue persists, contact your ISP for line activation.
Can I use this router with a cable modem?
Yes, the BIPAC 7402GX supports dual WAN. Use the Ethernet WAN port (port 4) to connect to a cable modem for broadband internet.
How to update the firmware?
Download the latest firmware from Billion's support site. Log into the router, go to Administration > Firmware Upgrade, select the file, and click Upgrade. Do not power off during update.
What should I do if I forget the router password?
Perform a hardware reset (see above). This will restore default credentials. After reset, reconfigure your settings.
Is the router compatible with VoIP?
The BIPAC 7402GX does not have built-in VoIP ports. However, it can be used with a separate VoIP adapter connected to one of the LAN ports.
How to set up port forwarding?
Go to Advanced > Virtual Server (or Port Forwarding). Enter a rule name, select protocol (TCP/UDP), enter internal/external port range, and specify the local IP of the target device.
What is the maximum wireless range?
Indoor range is typically up to 100 meters (328 feet), but can vary due to walls and interference. Outdoor range may extend to 300 meters in open space.
User questions about BIPAC 7402GX Billion
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual BIPAC 7402GX - Billion and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BIPAC 7402GX by Billion.