SM6V-G - Pregnant APART - Free user manual and instructions
Find the device manual for free SM6V-G APART in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive loudspeaker |
| Brand | APart |
| Model | SM6V-G |
| Speaker Configuration | 2-way (woofer + tweeter) |
| Woofer Size | 6.5 inches (165 mm) |
| Tweeter Size | 1 inch (25 mm) soft dome |
| Frequency Response | 55 Hz - 20 kHz |
| Impedance | 8 ohms |
| Sensitivity | 90 dB (1W/1m) |
| Power Handling (RMS) | 100 W |
| Power Handling (Peak) | 200 W |
| Dimensions (H x W x D) | 330 x 210 x 220 mm |
| Weight | 4.5 kg |
| Enclosure Material | MDF with vinyl finish |
| Mounting Options | Wall mount bracket included |
| Input Connectors | Spring-loaded terminals |
| Grille | Black metal grille |
| Color | Black |
| Recommended Amplifier | 20 - 150 W RMS at 8 ohms |
| Usage | Indoor installed audio |
| Included Accessories | Wall bracket, screws, manual |
| Warranty | 2 years |
| Safety Standards | CE, RoHS compliant |
| Maintenance | Wipe with dry cloth; do not use solvents |
Frequently Asked Questions - SM6V-G APART
How do I connect the SM6V-G to my amplifier?
Use the spring-loaded terminals on the back. Strip the speaker wire about 10 mm, press the terminal, insert wire, and release. Ensure correct polarity (+ to +, - to -).
What is the recommended amplifier power for the SM6V-G?
An amplifier with 20 to 150 watts RMS per channel at 8 ohms is recommended for optimal performance and to avoid damage.
Can the SM6V-G be used outdoors?
The SM6V-G is designed for indoor use only. It is not weatherproof. Exposure to moisture may damage the speaker.
How do I mount the SM6V-G on a wall?
Use the included wall bracket. Secure the bracket to the wall with appropriate screws (not included), then attach the speaker by aligning the bracket slots and sliding down until locked.
What should I do if there is no sound?
Check that the amplifier is powered on and the volume is turned up. Verify speaker wire connections are secure and not touching each other. Test with another speaker to rule out amplifier issues.
What is the impedance of the SM6V-G?
The nominal impedance is 8 ohms. Ensure your amplifier is rated for 8-ohm loads.
How do I clean the SM6V-G?
Use a soft, dry cloth to wipe the cabinet and grille. Do not use water, solvents, or abrasive cleaners as they may damage the finish.
Can I use the SM6V-G with a subwoofer?
Yes, you can pair it with a subwoofer. Set your amplifier or receiver to route low frequencies (below 80 Hz) to the subwoofer for best results.
What are the dimensions of the SM6V-G?
The dimensions are approximately 330 x 210 x 220 mm (H x W x D). Please check the manual for exact measurements.
Is the SM6V-G magnetically shielded?
No, the SM6V-G is not magnetically shielded. Keep it away from CRT monitors or magnetic storage media to avoid interference.
User questions about SM6V-G APART
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual SM6V-G - APART and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SM6V-G by APART.