ML 1024 C - Washing machine ACEC - Free user manual and instructions

Product Type	Front-loading washing machine
Brand	Acec
Model	ML 1024 C
Capacity	10 kg (estimated)
Dimensions (H x W x D)	85 x 60 x 60 cm
Weight	Approx. 70 kg
Power Supply	220-240 V, 50 Hz, 2000 W
Energy Consumption	1.02 kWh per cycle (typical)
Water Consumption	Approx. 60 L per cycle
Spin Speed	Max 1000 rpm
Number of Programs	15 (including cotton, synthetics, delicates, wool)
Temperature Settings	Cold to 90°C
Display	LED indicator lights
Delay Start	Up to 24 hours
Child Lock	Yes
Overflow Protection	Yes (automatic water stop)
Drum Material	Stainless steel
Door Diameter	30 cm
Noise Level (Wash/Spin)	58 / 72 dB(A)
Maintenance	Clean lint filter monthly, descale periodically
Spare Parts	Belt, door seal, motor brushes, pump filter available
Reparability	Modular design; parts replaceable by technician
Safety Certifications	CE, EMC

Frequently Asked Questions - ML 1024 C ACEC

How do I install the washing machine?

Ensure the machine is on a level surface. Remove transit bolts, connect water inlet hose to faucet, place drain hose in a standpipe or sink, and plug into a grounded outlet.

What does the error code 'E1' mean?

Error E1 indicates a water supply issue. Check that the faucet is open, the inlet hose is not kinked, and the water pressure is sufficient.

How can I clean the lint filter?

Open the filter cover at the bottom front. Turn the filter knob counterclockwise, pull it out, rinse under running water, and reinstall.

The machine does not spin. What should I do?

Check if the load is unbalanced. Distribute clothes evenly. Also ensure the drain filter is not clogged. If problem persists, the drive belt may be worn.

What is the maximum load capacity?

The maximum dry laundry capacity is 10 kg. Do not overload to avoid damage and ensure proper cleaning.

How do I run a drum cleaning cycle?

Select the 'Drum Clean' program (if available) or run a hot wash (90°C) with a cup of white vinegar or a drum cleaner product.

Can I delay the start of a wash?

Yes, press the 'Delay' button repeatedly to set a delay from 1 to 24 hours. The machine will start automatically after the delay.

Why is there water under the machine?

Check if the drain hose connection is secure or if the door seal is damaged. Also inspect the detergent drawer for overflow.

How often should I replace the door seal?

Replace the door seal if it shows cracks, mold, or leaks. Typically every 3-5 years depending on usage.

Is it safe to wash wool in this machine?

Yes, use the 'Wool' program with cold water and a gentle spin. Use a detergent suitable for wool.

USER MANUAL ML 1024 C ACEC

Technical line drawing of a mechanical component with mounting holes and a central circular housing (no text or symbols)

Zet de machine rechtop.

Pure electrical circuit lines without any symbols

Watertoevoer

Simple line drawing of a faucet with a person holding a bag, no text or symbols present

Diagram of a cable or hose assembly with a curved arrow indicating direction (no text or symbols)

Line drawing of a kitchen sink with pipe fittings and a faucet, no text or symbols present

Illustration of a hand performing a neck massage or pressure technique with directional arrows indicating motion (no text or symbols)

Line drawing of a person interacting with a large circular object (no text or symbols)

Illustration of a hand using a tool to adjust or install a component into a drawer (no text or symbols visible)

Line drawing of a hand placing a tray into a drawer with a tool, no text or symbols present

Line drawing of a hand holding a spherical object with measurement markings (no text or symbols)

Hand holding a circular object with a curved arrow indicating rotation (no text or symbols)

Hand holding a cylindrical object with a black arrow pointing to it, against a plain background (no text or symbols)

7 De machine is klaar

Technical line drawing of a mechanical component with a grid-like structure and an arrow indicating direction (no text or symbols)

Line drawing of a hand using a tool to cut or remove a component inside a container (no text or symbols)

Illustration of a hand holding a circular object with an arrow indicating rotation (no text or symbols)

Illustration of a hand holding a mechanical component with directional arrows indicating motion (no text or symbols)

Illustration of a hand washing a large pipe into a faucet (no text or symbols)

Illustration of a hand holding a tool with a curved tool and an arrow indicating direction (no text or symbols)

5022678800